Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> writes: > Kevin, > I pulled git kernel today but still I am not seeing this patch in pm > branch, looks like this patch is missing in the pm branch. Can you > please recheck the same? Hi Ramesh, It looks like Tony's tree is not sync'ing with my PM branch anymore. I will check with Tony. In the mean-time, you could try to pull directly from my git repo[1] Kevin [1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git > > > On 2/5/09, Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> wrote: >> Kevin, >> I applied the patch maually at my end and tested, this works fine for >> me. anyway I will try with pm branch . >> >> thanks >> Ramesh Gupta G >> On 2/5/09, Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> wrote: >> > Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> writes: >> > >> > > Hi Kevin, >> > > >> > > >> > > On 2/4/09, Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> wrote: >> > >> Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> writes: >> > >> >> > >> > Kevin, >> > >> > >> > >> > >> > >> > On 2/4/09, Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> wrote: >> > >> >> Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> writes: >> > >> >> >> > >> >> > Hi, >> > >> >> > >> > >> >> > I am able to resolve all other issues with this pm branch except one issue, >> > >> >> > >> > >> >> > I am not able to enable the iva2 clock once system is suspended and >> > >> >> > resumed, I am getting below messages. >> > >> >> >> >> > >> >> >> <3>clock: dpll2_ck failed transition to 'locked' >> > >> >> >> clock: dpll2_ck failed transition to 'locked' >> > >> >> >> <3>clock: dpll2_ck failed transition to 'locked' >> > >> >> >> clock: dpll2_ck failed transition to 'locked' >> > >> >> > >> > >> >> > Once after booting ( without adding bridgedriver/ installing bridgedriver) >> > >> >> > CM_CLKEN_PLL_IVA2 value shows as 0x37 indicates IVA2 DPLL in locked mode. >> > >> >> > >> > >> >> > once after system suspend the value is not restored I am seeing that as >> > >> >> > 0x11 indicates IVA2 DPLL is low power stop mode. >> > >> >> > >> > >> >> > Can any one please provide your inputs on the above error? I tried >> > >> >> > reconfiguring the CM_CLKEN_PLL_IVA2 to lock mode but still I am seeing >> > >> >> > the same messages as above while enabling iva2 clock. >> > >> >> >> > >> >> Are you suspending into retention or off-mode? >> > >> > >> > >> > I am suspending into Off mode. >> > >> > >> > >> >> > >> Do you see this problem when only going into retention? >> > >> >> > >> If not, sounds like we're missing some registers being saved/restored >> > >> across off-mode. >> > > >> > > I am seeing this issue only with OFF mode , retention works fine for me, >> > > yeah, looks like some registers are not restored properly across off mode. >> > > please let me know your inputs on this. >> > > >> > >> > I have just updated the PM branch with a fix from Jouni to >> > save/restore CM_CLKSEL1_PLL_IVA2. >> > >> > Can you try the latest PM branch? >> > >> > Thanks, >> > >> > Kevin >> > >> >> >> -- >> Thanks >> Ramesh Gupta G >> > > > -- > Thanks > Ramesh Gupta G -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
