Ramesh Gupta Guntha <grgupta77@xxxxxxxxx> writes: > Hi, > > I am able to resolve all other issues with this pm branch except one issue, > > I am not able to enable the iva2 clock once system is suspended and > resumed, I am getting below messages. >> >> <3>clock: dpll2_ck failed transition to 'locked' >> clock: dpll2_ck failed transition to 'locked' >> <3>clock: dpll2_ck failed transition to 'locked' >> clock: dpll2_ck failed transition to 'locked' > > Once after booting ( without adding bridgedriver/ installing bridgedriver) > CM_CLKEN_PLL_IVA2 value shows as 0x37 indicates IVA2 DPLL in locked mode. > > once after system suspend the value is not restored I am seeing that as > 0x11 indicates IVA2 DPLL is low power stop mode. > > Can any one please provide your inputs on the above error? I tried > reconfiguring the CM_CLKEN_PLL_IVA2 to lock mode but still I am seeing > the same messages as above while enabling iva2 clock. Are you suspending into retention or off-mode? Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
