Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- [PATCH 4/6] ARM: OMAP3+: ABB: add aliases for clocks used in ABB driver, (continued)
[PATCH 00/28] OMAP: DSS related board file changes,
Tomi Valkeinen
- [PATCH 01/28] ARM: OMAP: Remove unnecessary platform callbacks for VENC devices,
Tomi Valkeinen
- [PATCH 02/28] ARM: OMAP: don't use reset_gpio from omap4_panda_dvi_device,
Tomi Valkeinen
- [PATCH 03/28] ARM: OMAP: Overo: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 04/28] ARM: OMAP: 3430SDP: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 05/28] ARM: OMAP: 4430SDP: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 07/28] ARM: OMAP: OMAP3EVM: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 08/28] ARM: OMAP: CM-T35: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 09/28] ARM: OMAP: AM3517EVM: Kconfig option for the display options,
Tomi Valkeinen
- [PATCH 10/28] ARM: OMAP: Panda: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 11/28] ARM: OMAP: Panda & SDP: use new HDMI driver,
Tomi Valkeinen
- [PATCH 12/28] ARM: OMAP: 4430SDP: use new Taal driver,
Tomi Valkeinen
- [PATCH 14/28] ARM: OMAP: Stalker: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 13/28] ARM: OMAP: Beagle: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 16/28] ARM: OMAP: IGEP0020: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 15/28] ARM: OMAP: OMAP3EVM: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 18/28] ARM: OMAP: CM-T35: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 20/28] ARM: OMAP: 3430SDP: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 21/28] ARM: OMAP: Overo: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 22/28] ARM: OMAP: Overo: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 23/28] ARM: OMAP: LDP: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 24/28] ARM: OMAP: H4: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 25/28] ARM: OMAP: Devkit8000: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 26/28] ARM: OMAP: CM-T35: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 28/28] ARM: OMAP: 2430SDP: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 27/28] ARM: OMAP: AM3517EVM: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- [PATCH 17/28] ARM: OMAP: Devkit8000: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 19/28] ARM: OMAP: AM3517EVM: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 06/28] ARM: OMAP: DEVKIT8000: Kconfig option for the display options,
Tomi Valkeinen
- Re: [PATCH 00/28] OMAP: DSS related board file changes,
Igor Grinberg
- Re: [PATCH 00/28] OMAP: DSS related board file changes,
Tomi Valkeinen
[GIT PULL] fbdev fixes for 3.9,
Tomi Valkeinen
[PATCH] ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass,
Rajendra Nayak
[PATCH v2] omap2: twl-common: Add default power configuration,
Peter Ujfalusi
[PATCH] arm/dts: OMAP3: fix pinctrl-single configuration,
Christoph Fritz
[PATCH-V2 0/6] ARM: dts: AM33XX: Cleanup and pinctrl binding support,
Vaibhav Hiremath
[PATCH v4 0/6] Generic PHY Framework,
Kishon Vijay Abraham I
[PATCH] video: omap2: dss: use PTR_RET function,
Andrei Epure
[GIT PULL] omap fixes for v3.9-rc4,
Tony Lindgren
[net-next PATCH 0/2] network performance improvement patches for TI CPSW and Davinci EMAC drivers,
Mugunthan V N
[PATCH 0/5] ARM: dts: AM33XX: Cleanup and pinctrl binding support,
Vaibhav Hiremath
Message not available
Message not available
[PATCH-V2] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock,
Vaibhav Hiremath
[net-next PATCH 1/1] drivers: net: ethernet: ti: sparse warning fix for ti ethernet drivers,
Mugunthan V N
[RFC 00/14] Add DT support to OMAPDSS,
Tomi Valkeinen
- [RFC 01/14] ARM: OMAP: remove DSS DT hack,
Tomi Valkeinen
- [RFC 02/14] ARM: OMAP2+: add omapdss_init_of(),
Tomi Valkeinen
- [RFC 04/14] OMAPDSS: Add DT support to DSI,
Tomi Valkeinen
- [RFC 05/14] OMAPDSS: Add DT support to HDMI,
Tomi Valkeinen
- [RFC 03/14] OMAPDSS: Add DT support to DSS, DISPC, DPI,
Tomi Valkeinen
- [RFC 06/14] OMAPDSS: Taal: Add DT support,
Tomi Valkeinen
- [RFC 07/14] OMAPDSS: TFP410: Add DT support,
Tomi Valkeinen
- [RFC 11/14] ARM: omap4-panda.dts: add display information,
Tomi Valkeinen
- [RFC 12/14] ARM: omap4-sdp.dts: add display information,
Tomi Valkeinen
- [RFC 14/14] ARM: omap3-beagle.dts: add TFP410,
Tomi Valkeinen
- [RFC 13/14] ARM: omap3-tobi.dts: add lcd (TEST),
Tomi Valkeinen
- [RFC 08/14] OMAPDSS: panel-generic-dpi: add DT support,
Tomi Valkeinen
- [RFC 09/14] ARM: omap3.dtsi: add omapdss information,
Tomi Valkeinen
- [RFC 10/14] ARM: omap4.dtsi: add omapdss information,
Tomi Valkeinen
- Re: [RFC 00/14] Add DT support to OMAPDSS,
Benoit Cousson
- Re: [RFC 00/14] Add DT support to OMAPDSS,
Benoit Cousson
OMAP baseline test results for v3.9-rc4,
Paul Walmsley
[PATCH 00/26] DSS device model change,
Tomi Valkeinen
- [PATCH 01/26] OMAPDSS: only probe pdata if there's one,
Tomi Valkeinen
- [PATCH 02/26] OMAPDSS: add omap_dss_find_output(),
Tomi Valkeinen
- [PATCH 03/26] OMAPDSS: add omap_dss_find_output_by_node(),
Tomi Valkeinen
- [PATCH 04/26] OMAPDSS: fix dss_get_ctx_loss_count for DT,
Tomi Valkeinen
- [PATCH 05/26] OMAPDSS: DPI: fix regulators,
Tomi Valkeinen
- [PATCH 06/26] OMAPDSS: SDI: fix regulators,
Tomi Valkeinen
- [PATCH 08/26] OMAPDSS: use the panel list in omap_dss_get_next_device,
Tomi Valkeinen
- [PATCH 09/26] OMAPDSS: don't use dss bus in suspend/resume,
Tomi Valkeinen
- [PATCH 10/26] OMAPDSS: implement display sysfs without dss bus,
Tomi Valkeinen
- [PATCH 11/26] OMAPDSS: Add panel_dev pointer to dssdev,
Tomi Valkeinen
- [PATCH 13/26] OMAPDSS: DSI: new panel registration,
Tomi Valkeinen
- [PATCH 14/26] OMAPDSS: HDMI: new panel registration,
Tomi Valkeinen
- [PATCH 15/26] OMAPDSS: TFP410 platform_data changes,
Tomi Valkeinen
- [PATCH 12/26] OMAPDSS: DPI: new panel registration,
Tomi Valkeinen
- [PATCH 18/26] OMAPDSS: panel-generic-dpi: convert to platform device,
Tomi Valkeinen
- [PATCH 17/26] OMAPDSS: generic-dpi-panel platform_data changes,
Tomi Valkeinen
- [PATCH 20/26] OMAPDSS: Taal platform_data changes,
Tomi Valkeinen
- [PATCH 19/26] OMAPDSS: HDMI: convert to platform device,
Tomi Valkeinen
- [PATCH 21/26] OMAPDSS: Taal: convert to platform device,
Tomi Valkeinen
- [PATCH 22/26] ARM: OMAP: Panda: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 23/26] ARM: OMAP: Panda & SDP: use new HDMI driver,
Tomi Valkeinen
- [PATCH 25/26] ARM: OMAP: Overo: use new TFP410 platform driver,
Tomi Valkeinen
- [PATCH 24/26] ARM: OMAP: 4430SDP: use new Taal driver,
Tomi Valkeinen
- [PATCH 16/26] OMAPDSS: TFP410: convert to platform device,
Tomi Valkeinen
- [PATCH 07/26] OMAPDSS: add panel list,
Tomi Valkeinen
- [PATCH 26/26] ARM: OMAP: Overo: use new generic-dpi-panel platform driver,
Tomi Valkeinen
- Re: [PATCH 00/26] DSS device model change,
Tony Lindgren
regarding arm: update ARM_ERRATA_430973 Kconfig,
Peter Meerwald
[PATCH] omap: fix typo "CONFIG_BRIDGE_DVFS",
Paul Bolle
[PATCH] spi: spi-omap2-mcspi.c: Add dts for slave device configuration.,
Matthias Brugger
Re: [PATCH] spi: spi-omap2-mcspi.c: Add dts for slave device configuration.,
Mark Brown
Message not available
[PATCH] ASoC: omap: Call omap_mcbsp_set_threshold() from mcbsp hw_params,
Lars-Peter Clausen
3.9.0-rc3: BUG: Bad page state in process,
Mark Jackson
[PATCH] ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock,
Vaibhav Hiremath
[PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support,
Santosh Shilimkar
- [PATCH v2 01/18] ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use,
Santosh Shilimkar
- [PATCH v2 02/18] ARM: OMAP5: PM: Update CPU context register offset,
Santosh Shilimkar
- [PATCH v2 03/18] ARM: OMAP4+: PM: Consolidate and use OMAP4 PM code for OMAP5,
Santosh Shilimkar
- [PATCH v2 04/18] ARM: OMAP5: PM: Set MPUSS-EMIF clock-domain static dependency,
Santosh Shilimkar
- [PATCH v2 06/18] ARM: OMAP5: PM: Enable Mercury retention mode on CPUx powerdomains,
Santosh Shilimkar
- [PATCH v2 05/18] ARM: OMAP5: PM: Enables ES2 PM mode by default,
Santosh Shilimkar
- [PATCH v2 07/18] ARM: OMAP5: Add init_late() hook to enable pm initialization,
Santosh Shilimkar
- [PATCH v2 09/18] ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method,
Santosh Shilimkar
- [PATCH v2 12/18] ARM: OMAP4: CPUidle: Avoid double idle driver registration,
Santosh Shilimkar
- [PATCH v2 11/18] ARM: OMAP5: PM: Add L2 memory power down support,
Santosh Shilimkar
- [PATCH v2 08/18] ARM: OMAP5: PM: Add CPU power off in hotplug path,
Santosh Shilimkar
- [PATCH v2 16/18] ARM: OMAP4+: CPUidle: Deprecate use of omap4_mpuss_read_prev_context_state(),
Santosh Shilimkar
- [PATCH v2 17/18] ARM: OMAP4+: CPUidle: Add OMAP5 idle driver support,
Santosh Shilimkar
- [PATCH v2 15/18] ARM: OMAP4+: CPUidle: Consolidate idle driver for OMAP5 support,
Santosh Shilimkar
- [PATCH v2 18/18] ARM: OMAP5: PM: handle device instance for warm reset,
Santosh Shilimkar
- [PATCH v2 14/18] ARM: OMAP4: CPUidle: Make C-state description field more precise,
Santosh Shilimkar
- [PATCH v2 13/18] ARM: OMAP: CPUidle: Unregister drivere on device registration failure,
Santosh Shilimkar
- [PATCH v2 10/18] ARM: OMAP5: PM: Add MPU Open Switch Retention support,
Santosh Shilimkar
- Re: [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support,
Lokesh Vutla
- Re: [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support,
Sourav Poddar
- Re: [PATCH v2 00/18] ARM: OMAP5: PM: Add MPUSS suspend and CPUidle support,
Kevin Hilman
[PATCH 0/3] add pin-mux configuration for AM33xx CPSW,
Mugunthan V N
[PATCHv3 0/3] usb: phy: remaining twl4030-usb/omap fixes,
Grazvydas Ignotas
[PATCH 2/2] cpufreq: drivers: Remove unnecessary assignments of policy-> members,
Viresh Kumar
RFC: Crypto performance (omap-sham),
Joel A Fernandes
question about OMAP3610,
sungang
channel swapping issue on OMAP3/TWL4030 is back,
Peter Meerwald
Display related board specific boot args,
Tomi Valkeinen
[PATCH] ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD",
Paul Bolle
[RFC 0/8]: omap4: clk: move clock data under drivers/clk,
Tero Kristo
[RFC 5/8] CLK: OMAP4: modify clock data layout for the new driver format,
Tero Kristo
[RFC 6/8] CLK: OMAP4: add support for the new clock init code,
Tero Kristo
[RFC 7/8] clk: use strncmp for matching con_id in clk_find,
Tero Kristo
[RFC 4/8] CLK: OMAP4: copy over cclock44xx_data.c file from mach-omap2,
Tero Kristo
[RFC 8/8] ARM: OMAP4: use new driver for omap4 clock data,
Tero Kristo
Re: [RFC 0/8]: omap4: clk: move clock data under drivers/clk,
Rajendra Nayak
[PATCH] ARM: OMAP4: Enable fix for Cortex-A9 erratas,
Sricharan R
[PATCH] ARM: OMAP4: clock: Initialize USB DPLL,
Roger Quadros
[BUGFIX PATCH] ARM: OMAP: fix type of return values in omap_device_get_by_hwmod_name(),
Lothar Waßmann
[PATCH v2] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized,
Rajendra Nayak
[BUG] bisected: PandaBoard smsc95xx ethernet driver error from USB timeout,
Frank Rowand
[PATCH] ARM: convert arm/arm64 arch timer to use CLKSRC_OF init,
Rob Herring
[PATCH v2 0/2] ARM: dts: OMAP4+: Add dmm device bindings,
Andy Gross
[PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10,
Roger Quadros
- [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data,
Roger Quadros
- [PATCH v4 15/21] ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 02/21] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys(),
Roger Quadros
- [PATCH v4 19/21] ARM: dts: OMAP4: Add HS USB Host IP nodes,
Roger Quadros
- [PATCH v4 20/21] ARM: dts: OMAP3: Add HS USB Host IP nodes,
Roger Quadros
- [PATCH v4 21/21] ARM: dts: omap3-beagle: Add USB Host support,
Roger Quadros
- [PATCH v4 18/21] ARM: OMAP: zoom: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 06/21] ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 17/21] ARM: OMAP3: overo: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 16/21] ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 14/21] ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 12/21] ARM: OMAP3: igep0020: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 13/21] ARM: OMAP3: omap3evm: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 11/21] ARM: OMAP: devkit8000: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 10/21] ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 09/21] ARM: OMAP3: cm-t35: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 05/21] ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 08/21] ARM: OMAP: AM3517evm: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 04/21] ARM: OMAP3: Beagle: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 07/21] ARM: OMAP: AM3517crane: Adapt to ehci-omap changes,
Roger Quadros
- [PATCH v4 03/21] ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes,
Roger Quadros
- Re: [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10,
Benoit Cousson
GPIO - Fix checkpatch errors,
Laurent Navet
- [PATCH 10/10] gpio: gpio-tps65910.c: fix checkpatch error,
Laurent Navet
- [PATCH 09/10] gpio: gpio-timberdale.c: fix checkpatch error,
Laurent Navet
- [PATCH 08/10] gpio: gpio-tc3589x.c: fix checkpatch errors,
Laurent Navet
- [PATCH 06/10] gpio: gpio-sch.c: fix checkpatch error,
Laurent Navet
- [PATCH 07/10] gpio: gpio-stp-xway.c: fix checkpatch error,
Laurent Navet
- [PATCH 04/10] gpio: gpio-pca953x.c: fix checkpatch error,
Laurent Navet
- [PATCH 05/10] gpio: gpio-pxa.c: fix checkpatch errors,
Laurent Navet
- [PATCH 02/10] gpio: gpio-mvebu.c: fix checkpatch errors,
Laurent Navet
- [PATCH 03/10] gpio: gpio-omap.c: fix checkpatch error,
Laurent Navet
- [PATCH 01/10] gpio: gpiolib-of.c: fix checkpatch error,
Laurent Navet
[PATCH v3 0/6] Generic PHY Framework,
Kishon Vijay Abraham I
[GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Tony Lindgren
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Paul Walmsley
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Tony Lindgren
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Tony Lindgren
- RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Hiremath, Vaibhav
- RE: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Hiremath, Vaibhav
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Santosh Shilimkar
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Tero Kristo
- Re: [GIT PULL] ARM: OMAP5: hwmod, prm/cm data files and updates for 3.10,
Paul Walmsley
[GIT PULL] ARM: OMAP5: Generic updates and es2 fixes for 3.10,
Santosh Shilimkar
[GIT PULL] ARM: OMAP2+: Generic cleanups for 3.10,
Santosh Shilimkar
[GIT PULL] ARM: OMAP2+: Serial driver sysc cleanup for 3.10,
Santosh Shilimkar
[RESEND PATCH 1/1] ARM: dts: AM33XX: Add CPSW phy_id device tree data to am335x-evmsk,
Mugunthan V N
[LAKML][Users getting knocked of from list],
Santosh Shilimkar
[PATCH 0/2] ARM: dts: OMAP4+: Add dmm device bindings,
Andy Gross
OK to use commit 71856843 as base for further omap clean up?,
Tony Lindgren
[PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot,
Nishanth Menon
- [PATCH V2 6/8] ARM: dts: OMAP4460: Add CPU OPP table,
Nishanth Menon
- [PATCH V2 7/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot,
Nishanth Menon
- [PATCH V2 8/8] cpufreq: OMAP: donot allow to be used with device tree,
Nishanth Menon
- [PATCH V2 2/8] ARM: dts: OMAP36xx: Add CPU OPP table,
Nishanth Menon
- [PATCH V2 1/8] ARM: dts: OMAP34xx/35xx: Add CPU OPP table,
Nishanth Menon
- [PATCH V2 4/8] ARM: dts: OMAP443x: Add CPU OPP table,
Nishanth Menon
- [PATCH V2 3/8] ARM: dts: OMAP3: use twl4030 vdd1 regulator for CPU,
Nishanth Menon
- [PATCH V2 5/8] ARM: dts: omap4-panda: move generic sections to panda-common,
Nishanth Menon
- Re: [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot,
Kevin Hilman
- Re: [PATCH V2 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot,
Benoit Cousson
[PATCH 0/5] ARM: OMAP: DMTIMER updates for v3.10,
Jon Hunter
[PATCH] drivers: video: omap2: dss: Use PTR_RET function,
Alexandru Gheorghiu
[GIT PULL] ARM: OMAP2+: clkdev flags removal for 3.10 cleanup,
Paul Walmsley
[PATCH V4 00/18] ARM: OMAP2+: GPMC clean-up and DT update,
Jon Hunter
- [PATCH V4 01/18] ARM: OMAP2+: Simplify code configuring ONENAND devices,
Jon Hunter
- [PATCH V4 02/18] ARM: OMAP2+: Add variable to store number of GPMC waitpins,
Jon Hunter
- [PATCH V4 04/18] ARM: OMAP2+: Add function for configuring GPMC settings,
Jon Hunter
- [PATCH V4 03/18] ARM: OMAP2+: Add structure for storing GPMC settings,
Jon Hunter
- [PATCH V4 05/18] ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings(),
Jon Hunter
- [PATCH V4 06/18] ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings(),
Jon Hunter
- [PATCH V4 08/18] ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings(),
Jon Hunter
- [PATCH V4 09/18] ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure(),
Jon Hunter
- [PATCH V4 10/18] ARM: OMAP2+: Add function to read GPMC settings from device-tree,
Jon Hunter
- [PATCH V4 13/18] ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT,
Jon Hunter
- [PATCH V4 07/18] ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings(),
Jon Hunter
- [PATCH V4 14/18] ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT,
Jon Hunter
- [PATCH V4 17/18] ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails,
Jon Hunter
- [PATCH V4 15/18] ARM: OMAP2+: Detect incorrectly aligned GPMC base address,
Jon Hunter
- [PATCH V4 12/18] ARM: OMAP2+: Add device-tree support for NOR flash,
Jon Hunter
- [PATCH V4 18/18] ARM: OMAP2+: return -ENODEV if GPMC child device creation fails,
Jon Hunter
- [PATCH V4 16/18] ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable,
Jon Hunter
- [PATCH V4 11/18] ARM: OMAP2+: Add additional GPMC timing parameters,
Jon Hunter
Beagleboard xM - Bogomips are very low,
Guillaume Gardet
[PATCHv2 00/12] staging: [omap,ti-soc]-thermal: fixes and renaming,
Eduardo Valentin
- [PATCHv2 02/12] staging: omap-thermal: rename bg_ptr to bgp,
Eduardo Valentin
- [PATCHv2 03/12] staging: rename omap-thermal driver to ti-soc-thermal,
Eduardo Valentin
- [PATCHv2 04/12] staging: ti-soc-thermal: rename Kconfig options,
Eduardo Valentin
- [PATCHv2 05/12] staging: ti-soc-thermal: rename symbols to use better prefix,
Eduardo Valentin
- [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error,
Eduardo Valentin
- [PATCHv2 10/12] staging: ti-soc-thermal: fix condition to apply hyst,
Eduardo Valentin
- [PATCHv2 07/12] staging: ti-soc-thermal: split writable data from readonly data,
Eduardo Valentin
- [PATCHv2 11/12] staging: ti-soc-thermal: fix bitfield writing while updating thresholds,
Eduardo Valentin
- [PATCHv2 12/12] staging: ti-soc-thermal: propagate error code,
Eduardo Valentin
- [PATCHv2 08/12] stating: ti-soc-thermal: use sizeof(*pointer) while allocating,
Eduardo Valentin
- [PATCHv2 06/12] staging: ti-soc-thermal: make unexported functions local,
Eduardo Valentin
- [PATCHv2 01/12] staging: omap-thermal: fix return value,
Eduardo Valentin
- Re: [PATCHv2 00/12] staging: [omap,ti-soc]-thermal: fixes and renaming,
Dan Carpenter
[RFC][PATCH 0/2] Device tree support for OMAP4 SCRM clocks,
Roger Quadros
[PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10,
Santosh Shilimkar
- [PATCH v2 01/11] ARM: dts: omap5-evm: Update available memory to 2032 MB,
Santosh Shilimkar
- [PATCH v2 03/11] ARM: dts: OMAP5: Specify nonsecure PPI IRQ for arch timer,
Santosh Shilimkar
- [PATCH v2 02/11] ARM: dts: OMAP5: Align the local timer dt node as per the current binding code,
Santosh Shilimkar
- [PATCH v2 05/11] ARM: dts: OMAP5: Update the timer and gic nodes for HYP kernel support,
Santosh Shilimkar
- [PATCH v2 04/11] ARM: dts: OMAP5: Move the gic node out of ocp space,
Santosh Shilimkar
- [PATCH v2 06/11] ARM: dts: OMAP5: Update keypad reg property,
Santosh Shilimkar
- [PATCH v2 07/11] Documentation: dt: OMAP: l3-noc: Add *reg* in required properties,
Santosh Shilimkar
- [PATCH v2 10/11] ARM: OMAP2+: hwmod: extract module address space from DT blob,
Santosh Shilimkar
- [PATCH v2 09/11] ARM: dts: OMAP5: Add watchdog timer node,
Santosh Shilimkar
- [PATCH v2 11/11] ARM: OMAP2+: omap_hwmod: Don't call _init_mpu_rt_base if no sysc,
Santosh Shilimkar
- [PATCH v2 08/11] ARM: dts: OMAP4/5: Update l3-noc dt nodes,
Santosh Shilimkar
- Re: [PATCH v2 00/11] ARM: dts: OMAP5: ocp address space and few updates for 3.10,
Benoit Cousson
[PATCH] ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized,
Rajendra Nayak
[PATCH] ARM: OMAP: remove "config FB_OMAP_CONSISTENT_DMA_SIZE",
Paul Bolle
OMAP baseline test results for v3.9-rc3,
Paul Walmsley
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]