Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-am3517evm.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 1d7d0d8..c545981 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -200,20 +200,20 @@ static void __init am3517_evm_display_init(void)
}
static struct tfp410_platform_data dvi_panel = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .data_lines = 24,
.power_down_gpio = -1,
.i2c_bus_num = -1,
};
-static struct omap_dss_device am3517_evm_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device am3517_evm_dvi_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &dvi_panel,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
- &am3517_evm_dvi_device,
&am3517_evm_tv_device,
};
@@ -359,6 +359,9 @@ static void __init am3517_evm_init(void)
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
am3517_evm_display_init();
+#if defined(CONFIG_MACH_OMAP3517EVM_EXPANSION_DVI)
+ platform_device_register(&am3517_evm_dvi_device);
+#endif
/* RTC - S35390A */
am3517_evm_rtc_init();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
