So here are the DSS related board file changes for 3.10. First there are a bunch of patches adding the Kconfig options so that only one display device is created for a single video bus. Only Overo had more than two displays on the same bus, but unfortunately there were multiple boards with a setup that puts an LCD and DVI output on the same video bus. So the ifdeffery is not very nice. But, as discussed, this is the best way forward, and should be seen as a temporary solution until we get full DT support. Then the rest are converting the old omap_dss_device style displays to platform devices. Only TFP410, generic-dpi-panel, HDMI and Taal drivers have been converted yet, but those seem to form the bulk of the display options used. This series can be found from: git://gitorious.org/linux-omap-dss2/linux.git 3.10-lo/1-arch-dss These patches depend on a few dss header file changes. These header file changes can be found from: git://gitorious.org/linux-omap-dss2/linux.git 3.10/0-dss-headers If this series is applied without the relevant omapdss changes, everything compiles and the boards boot, but the converted displays do not work. The same happens if only the omapdss changes are applied, but not this series. The related omapdss changes can be found from: git://gitorious.org/linux-omap-dss2/linux.git 3.10/3-dss-dev-model Tomi Archit Taneja (2): ARM: OMAP: Remove unnecessary platform callbacks for VENC devices ARM: OMAP: don't use reset_gpio from omap4_panda_dvi_device Tomi Valkeinen (26): ARM: OMAP: Overo: Kconfig option for the display options ARM: OMAP: 3430SDP: Kconfig option for the display options ARM: OMAP: 4430SDP: Kconfig option for the display options ARM: OMAP: DEVKIT8000: Kconfig option for the display options ARM: OMAP: OMAP3EVM: Kconfig option for the display options ARM: OMAP: CM-T35: Kconfig option for the display options ARM: OMAP: AM3517EVM: Kconfig option for the display options ARM: OMAP: Panda: use new TFP410 platform driver ARM: OMAP: Panda & SDP: use new HDMI driver ARM: OMAP: 4430SDP: use new Taal driver ARM: OMAP: Beagle: use new TFP410 platform driver ARM: OMAP: Stalker: use new TFP410 platform driver ARM: OMAP: OMAP3EVM: use new TFP410 platform driver ARM: OMAP: IGEP0020: use new TFP410 platform driver ARM: OMAP: Devkit8000: use new TFP410 platform driver ARM: OMAP: CM-T35: use new TFP410 platform driver ARM: OMAP: AM3517EVM: use new TFP410 platform driver ARM: OMAP: 3430SDP: use new TFP410 platform driver ARM: OMAP: Overo: use new TFP410 platform driver ARM: OMAP: Overo: use new generic-dpi-panel platform driver ARM: OMAP: LDP: use new generic-dpi-panel platform driver ARM: OMAP: H4: use new generic-dpi-panel platform driver ARM: OMAP: Devkit8000: use new generic-dpi-panel platform driver ARM: OMAP: CM-T35: use new generic-dpi-panel platform driver ARM: OMAP: AM3517EVM: use new generic-dpi-panel platform driver ARM: OMAP: 2430SDP: use new generic-dpi-panel platform driver arch/arm/mach-omap2/Kconfig | 100 ++++++++++++++++++++ arch/arm/mach-omap2/board-2430sdp.c | 24 ++--- arch/arm/mach-omap2/board-3430sdp.c | 78 +++++++++------- arch/arm/mach-omap2/board-am3517evm.c | 86 ++++++++--------- arch/arm/mach-omap2/board-cm-t35.c | 113 +++++++++++----------- arch/arm/mach-omap2/board-devkit8000.c | 106 +++++++++++++-------- arch/arm/mach-omap2/board-h4.c | 24 ++--- arch/arm/mach-omap2/board-igep0020.c | 22 ++--- arch/arm/mach-omap2/board-ldp.c | 22 ++--- arch/arm/mach-omap2/board-omap3beagle.c | 25 ++--- arch/arm/mach-omap2/board-omap3evm.c | 70 +++++++------- arch/arm/mach-omap2/board-omap3stalker.c | 28 ++---- arch/arm/mach-omap2/board-overo.c | 149 ++++++++++++++++++------------ arch/arm/mach-omap2/dss-common.c | 125 ++++++++++++------------- 14 files changed, 561 insertions(+), 411 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
