Use the new generic-dpi-panel platform driver instead of the old
omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-overo.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9cb29fc..03624c5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -241,27 +241,22 @@ static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
gpio_set_value(OVERO_GPIO_LCD_BL, 0);
}
-static struct panel_generic_dpi_data lcd43_panel = {
+static struct panel_generic_dpi_data overo_lcd43_data = {
+ .display_name = "lcd43",
+ .source = "dpi.0",
.name = "samsung_lte430wq_f0c",
.platform_enable = overo_panel_enable_lcd,
.platform_disable = overo_panel_disable_lcd,
+ .data_lines = 24,
};
-static struct omap_dss_device overo_lcd43_device = {
- .name = "lcd43",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
- .data = &lcd43_panel,
- .phy.dpi.data_lines = 24,
-};
-
-static struct omap_dss_device *overo_dss_devices[] = {
- &overo_lcd43_device,
+static struct platform_device overo_lcd43_device = {
+ .name = "generic_dpi_panel",
+ .id = 0,
+ .dev.platform_data = &overo_lcd43_data,
};
static struct omap_dss_board_info overo_dss_data = {
- .num_devices = ARRAY_SIZE(overo_dss_devices),
- .devices = overo_dss_devices,
.default_display_name = "lcd43",
};
@@ -279,6 +274,8 @@ static void __init overo_display_init(void)
gpio_export(OVERO_GPIO_LCD_EN, 0);
gpio_export(OVERO_GPIO_LCD_BL, 0);
+
+ platform_device_register(&overo_lcd43_device);
}
#endif
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
