Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-omap3beagle.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index c3558f9..1b65e92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -224,17 +224,18 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
/* DSS */
-static struct tfp410_platform_data dvi_panel = {
- .i2c_bus_num = 3,
- .power_down_gpio = -1,
+static struct tfp410_platform_data omap4_tfp410_pdata = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .i2c_bus_num = 3,
+ .data_lines = 24,
+ .power_down_gpio = -1,
};
-static struct omap_dss_device beagle_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "dvi",
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device omap4_panda_tfp410_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &omap4_tfp410_pdata,
};
static struct omap_dss_device beagle_tv_device = {
@@ -245,14 +246,13 @@ static struct omap_dss_device beagle_tv_device = {
};
static struct omap_dss_device *beagle_dss_devices[] = {
- &beagle_dvi_device,
&beagle_tv_device,
};
static struct omap_dss_board_info beagle_dss_data = {
.num_devices = ARRAY_SIZE(beagle_dss_devices),
.devices = beagle_dss_devices,
- .default_device = &beagle_dvi_device,
+ .default_display_name = "dvi",
};
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -316,7 +316,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
+ omap4_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@@ -450,6 +450,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
&keys_gpio,
&madc_hwmon,
&leds_pwm,
+ &omap4_panda_tfp410_device,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
