Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-omap3evm.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 2050679..de92965 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -238,21 +238,21 @@ static void __init omap3_evm_display_init(void)
}
static struct tfp410_platform_data dvi_panel = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .data_lines = 24,
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
.i2c_bus_num = -1,
};
-static struct omap_dss_device omap3_evm_dvi_device = {
- .name = "dvi",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device omap3_evm_dvi_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &dvi_panel,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
&omap3_evm_tv_device,
- &omap3_evm_dvi_device,
};
static struct omap_dss_board_info omap3_evm_dss_data = {
@@ -705,6 +705,9 @@ static void __init omap3_evm_init(void)
omap3_evm_i2c_init();
+#if defined(CONFIG_MACH_OMAP3EVM_EXPANSION_DVI)
+ platform_device_register(&omap3_evm_dvi_device);
+#endif
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
