Use the new generic-dpi-panel platform driver instead of the old
omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-devkit8000.c | 33 ++++++++++++++++++--------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index d05f069..1e0343f 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -122,35 +122,37 @@ static struct omap_dss_device devkit8000_tv_device = {
#if defined(CONFIG_MACH_DEVKIT8000_EXPANSION_LCD)
+static int lcd_reset_gpio;
+
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 1);
+ if (gpio_is_valid(lcd_reset_gpio))
+ gpio_set_value_cansleep(lcd_reset_gpio, 1);
return 0;
}
static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 0);
+ if (gpio_is_valid(lcd_reset_gpio))
+ gpio_set_value_cansleep(lcd_reset_gpio, 0);
}
static struct panel_generic_dpi_data lcd_panel = {
+ .display_name = "lcd",
+ .source = "dpi.0",
.name = "innolux_at070tn83",
+ .data_lines = 24,
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
-static struct omap_dss_device devkit8000_lcd_device = {
- .name = "lcd",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
- .data = &lcd_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device devkit8000_lcd_device = {
+ .name = "generic_dpi_panel",
+ .id = 0,
+ .dev.platform_data = &lcd_panel,
};
static struct omap_dss_device *devkit8000_dss_devices[] = {
- &devkit8000_lcd_device,
&devkit8000_tv_device,
};
@@ -238,11 +240,11 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
#if defined(CONFIG_MACH_DEVKIT8000_EXPANSION_LCD)
/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
- ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+ lcd_reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+ ret = gpio_request_one(lcd_reset_gpio,
GPIOF_OUT_INIT_LOW, "LCD_PWREN");
if (ret < 0) {
- devkit8000_lcd_device.reset_gpio = -EINVAL;
+ lcd_reset_gpio = -EINVAL;
printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
}
#elif defined(CONFIG_MACH_DEVKIT8000_EXPANSION_DVI)
@@ -455,6 +457,9 @@ static struct platform_device *devkit8000_devices[] __initdata = {
#if defined(CONFIG_MACH_DEVKIT8000_EXPANSION_DVI)
&devkit8000_dvi_device,
#endif
+#if defined(CONFIG_MACH_DEVKIT8000_EXPANSION_LCD)
+ &devkit8000_lcd_device,
+#endif
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
