Use the new generic-dpi-panel platform driver instead of the old
omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Cc: Mike Rapoport <mike@xxxxxxxxxxxxxx>
Cc: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/board-cm-t35.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 4f23be0..6b8aa87 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -214,21 +214,21 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
}
static struct panel_generic_dpi_data lcd_panel = {
+ .display_name = "lcd",
+ .source = "dpi.0",
.name = "toppoly_tdo35s",
+ .data_lines = 18,
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
-static struct omap_dss_device cm_t35_lcd_device = {
- .name = "lcd",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
- .data = &lcd_panel,
- .phy.dpi.data_lines = 18,
+static struct platform_device cm_t35_lcd_device = {
+ .name = "generic_dpi_panel",
+ .id = 0,
+ .dev.platform_data = &lcd_panel,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
- &cm_t35_lcd_device,
&cm_t35_tv_device,
};
@@ -282,6 +282,8 @@ static void __init cm_t35_init_display(void)
msleep(50);
gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
+ platform_device_register(&cm_t35_lcd_device);
+
err = omap_display_init(&cm_t35_dss_data);
if (err) {
pr_err("CM-T35: failed to register DSS device\n");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
