Some assignments of policy-> min/max/cur/cpuinfo.min_freq/cpuinfo.max_freq
aren't required as part of it is done by cpufreq driver or cpufreq core.
Remove them.
At some places we merge multiple lines together too.
Cc: Sekhar Nori <nsekhar@xxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: Paul Mundt <lethal@xxxxxxxxxxxx>
Cc: linux-sh@xxxxxxxxxxxxxxx
Cc: linux-omap@xxxxxxxxxxxxxxx
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
Documentation/cpu-freq/cpu-drivers.txt | 5 +++--
arch/arm/mach-davinci/cpufreq.c | 4 ----
arch/arm/mach-imx/cpufreq.c | 3 ---
arch/sh/kernel/cpufreq.c | 9 +++------
drivers/cpufreq/cpufreq-nforce2.c | 6 ++----
drivers/cpufreq/omap-cpufreq.c | 4 +---
6 files changed, 9 insertions(+), 22 deletions(-)
diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt
index 72f70b1..c94383f 100644
--- a/Documentation/cpu-freq/cpu-drivers.txt
+++ b/Documentation/cpu-freq/cpu-drivers.txt
@@ -108,8 +108,9 @@ policy->governor must contain the "default policy" for
cpufreq_driver.target is called with
these values.
-For setting some of these values, the frequency table helpers might be
-helpful. See the section 2 for more information on them.
+For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
+frequency table helpers might be helpful. See the section 2 for more information
+on them.
SMP systems normally have same clock source for a group of cpus. For these the
.init() would be called only once for the first online cpu. Here the .init()
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 8fb0c2a..ff46862 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -149,10 +149,6 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.max_freq = policy->max;
}
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
- policy->cur = davinci_getspeed(0);
-
/*
* Time measurement across the target() function yields ~1500-1800us
* time taken with no drivers on notification list.
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index cfce5e3..387dc4c 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -144,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy)
imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
policy->cur = clk_get_rate(cpu_clk) / 1000;
- policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
- policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
/* Manual states, that PLL stabilizes in two CLK32 periods */
policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
-
if (ret < 0) {
printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n",
__func__, ret);
diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index 0fdf64b..88c8fee 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -116,7 +116,7 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
return PTR_ERR(cpuclk);
}
- policy->cur = policy->min = policy->max = sh_cpufreq_get(cpu);
+ policy->cur = sh_cpufreq_get(cpu);
freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
if (freq_table) {
@@ -129,15 +129,12 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
dev_notice(dev, "no frequency table found, falling back "
"to rate rounding.\n");
- policy->cpuinfo.min_freq =
+ policy->min = policy->cpuinfo.min_freq =
(clk_round_rate(cpuclk, 1) + 500) / 1000;
- policy->cpuinfo.max_freq =
+ policy->max = policy->cpuinfo.max_freq =
(clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
}
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
-
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index 224a478..af1542d 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -359,12 +359,10 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
min_fsb = NFORCE2_MIN_FSB;
/* cpuinfo and default policy values */
- policy->cpuinfo.min_freq = min_fsb * fid * 100;
- policy->cpuinfo.max_freq = max_fsb * fid * 100;
+ policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100;
+ policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
policy->cur = nforce2_get(policy->cpu);
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
return 0;
}
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index b610edd..ad7549c 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -177,7 +177,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
goto fail_ck;
}
- policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu);
+ policy->cur = omap_getspeed(policy->cpu);
if (!freq_table)
result = opp_init_cpufreq_table(mpu_dev, &freq_table);
@@ -196,8 +196,6 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy)
cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
policy->cur = omap_getspeed(policy->cpu);
/*
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
