Fix :
gpio/gpio-sch.c:206: ERROR: switch and case should be at the same indent
Also remove blank lines
Signed-off-by: Laurent Navet <laurent.navet@xxxxxxxxx>
---
drivers/gpio/gpio-sch.c | 74 ++++++++++++++++++++++-------------------------
1 file changed, 35 insertions(+), 39 deletions(-)
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index edae963..cb60081 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -204,45 +204,41 @@ static int sch_gpio_probe(struct platform_device *pdev)
gpio_ba = res->start;
switch (id) {
- case PCI_DEVICE_ID_INTEL_SCH_LPC:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 10;
-
- sch_gpio_resume.base = 10;
- sch_gpio_resume.ngpio = 4;
-
- /*
- * GPIO[6:0] enabled by default
- * GPIO7 is configured by the CMC as SLPIOVR
- * Enable GPIO[9:8] core powered gpios explicitly
- */
- outb(0x3, gpio_ba + CGEN + 1);
- /*
- * SUS_GPIO[2:0] enabled by default
- * Enable SUS_GPIO3 resume powered gpio explicitly
- */
- outb(0x8, gpio_ba + RGEN);
- break;
-
- case PCI_DEVICE_ID_INTEL_ITC_LPC:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 5;
-
- sch_gpio_resume.base = 5;
- sch_gpio_resume.ngpio = 9;
- break;
-
- case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 21;
-
- sch_gpio_resume.base = 21;
- sch_gpio_resume.ngpio = 9;
- break;
-
- default:
- err = -ENODEV;
- goto err_sch_gpio_core;
+ case PCI_DEVICE_ID_INTEL_SCH_LPC:
+ sch_gpio_core.base = 0;
+ sch_gpio_core.ngpio = 10;
+ sch_gpio_resume.base = 10;
+ sch_gpio_resume.ngpio = 4;
+ /*
+ * GPIO[6:0] enabled by default
+ * GPIO7 is configured by the CMC as SLPIOVR
+ * Enable GPIO[9:8] core powered gpios explicitly
+ */
+ outb(0x3, gpio_ba + CGEN + 1);
+ /*
+ * SUS_GPIO[2:0] enabled by default
+ * Enable SUS_GPIO3 resume powered gpio explicitly
+ */
+ outb(0x8, gpio_ba + RGEN);
+ break;
+
+ case PCI_DEVICE_ID_INTEL_ITC_LPC:
+ sch_gpio_core.base = 0;
+ sch_gpio_core.ngpio = 5;
+ sch_gpio_resume.base = 5;
+ sch_gpio_resume.ngpio = 9;
+ break;
+
+ case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
+ sch_gpio_core.base = 0;
+ sch_gpio_core.ngpio = 21;
+ sch_gpio_resume.base = 21;
+ sch_gpio_resume.ngpio = 9;
+ break;
+
+ default:
+ err = -ENODEV;
+ goto err_sch_gpio_core;
}
sch_gpio_core.dev = &pdev->dev;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
