Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/mach-omap2/board-cm-t35.c | 20 ++++++++++++++------
1 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index af2bb21..7fda3f5 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -419,15 +419,22 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
- .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
- .reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
@@ -444,6 +451,7 @@ static void __init cm_t35_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
