OMAP5 has backward compatible PRCM block and it's programming
model is mostly similar to OMAP4. Same is going to be maintained
for future OMAP4 based SOCs. Hence consolidate the OMAP4 power
management code so that it can be re-used on OMAP5 and later devices.
With consolidated code, let basic power management code build
for OMAP5 devices. While at it, update the kernel-doc for omap4_pm_init().
Acked-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 9 ++--
arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} | 54 ++++++++++++++++----
.../mach-omap2/{sleep44xx.S => sleep_omap4plus.S} | 0
3 files changed, 49 insertions(+), 14 deletions(-)
rename arch/arm/mach-omap2/{pm44xx.c => pm_omap4plus.c} (86%)
rename arch/arm/mach-omap2/{sleep44xx.S => sleep_omap4plus.S} (100%)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d5ff91..d91ae0f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -35,14 +35,14 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
omap-4-5-common = omap4-common.o omap-wakeupgen.o \
- sleep44xx.o
+ sleep_omap4plus.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap-smc.o :=-Wa,-march=armv7-a$(plus_sec)
-AFLAGS_sleep44xx.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep_omap4plus.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
@@ -80,11 +80,12 @@ endif
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
ifeq ($(CONFIG_PM),y)
+omap4plus-common-pm = omap-mpuss-lowpower.o pm_omap4plus.o
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap4plus-common-pm)
+obj-$(CONFIG_SOC_OMAP5) += $(omap4plus-common-pm)
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm_omap4plus.c
similarity index 86%
rename from arch/arm/mach-omap2/pm44xx.c
rename to arch/arm/mach-omap2/pm_omap4plus.c
index 5ba6d88..e920c34 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm_omap4plus.c
@@ -1,7 +1,7 @@
/*
- * OMAP4 Power Management Routines
+ * OMAP4PLUS Power Management Routines
*
- * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010-2013 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@xxxxxx>
* Santosh Shilimkar <santosh.shilimkar@xxxxxx>
*
@@ -135,16 +135,16 @@ static void omap_default_idle(void)
}
/**
- * omap4_pm_init - Init routine for OMAP4 PM
+ * omap4_init_static_deps - Add OMAP4 static dependencies
*
- * Initializes all powerdomain and clockdomain target states
- * and all PRCM settings.
+ * Add needed static clockdomain dependencies on OMAP4 devices.
+ * Return: 0 on success or 'err' on failures
*/
-int __init omap4_pm_init(void)
+static inline int omap4_init_static_deps(void)
{
- int ret;
struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
struct clockdomain *ducati_clkdm, *l3_2_clkdm;
+ int ret = 0;
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
@@ -163,7 +163,7 @@ int __init omap4_pm_init(void)
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains\n");
- goto err2;
+ return ret;
}
/*
@@ -179,7 +179,7 @@ int __init omap4_pm_init(void)
ducati_clkdm = clkdm_lookup("ducati_clkdm");
if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
(!l3_2_clkdm) || (!ducati_clkdm))
- goto err2;
+ return -EINVAL;
ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
@@ -188,9 +188,42 @@ int __init omap4_pm_init(void)
ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
if (ret) {
pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * omap4_pm_init - Init routine for OMAP4+ devices
+ *
+ * Initializes all powerdomain and clockdomain target states
+ * and all PRCM settings.
+ * Return: Returns the error code returned by called functions.
+ */
+int __init omap4_pm_init(void)
+{
+ int ret = 0;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
+ return -ENODEV;
+ }
+
+ pr_info("Power Management for TI OMAP4PLUS devices.\n");
+
+ ret = pwrdm_for_each(pwrdms_setup, NULL);
+ if (ret) {
+ pr_err("Failed to setup powerdomains.\n");
goto err2;
}
+ if (cpu_is_omap44xx()) {
+ ret = omap4_init_static_deps();
+ if (ret)
+ goto err2;
+ }
+
ret = omap4_mpuss_init();
if (ret) {
pr_err("Failed to initialise OMAP4 MPUSS\n");
@@ -206,7 +239,8 @@ int __init omap4_pm_init(void)
/* Overwrite the default cpu_do_idle() */
arm_pm_idle = omap_default_idle;
- omap4_idle_init();
+ if (cpu_is_omap44xx())
+ omap4_idle_init();
err2:
return ret;
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep_omap4plus.S
similarity index 100%
rename from arch/arm/mach-omap2/sleep44xx.S
rename to arch/arm/mach-omap2/sleep_omap4plus.S
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
