Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH 2/2] MAINTAINERS: add entry for ROHM BH1750 driver, (continued)
- [PATCH v10 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
- [PATCH v9 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
- [PATCH] iio: adc: add support for Intel ADC,
Felipe Balbi
- [PATCH v3 0/7] add magnetometer support for MPU925x,
Jean-Baptiste Maneyrol
- [RFC/PATCH] counter: introduce support for Intel QEP Encoder,
Felipe Balbi
- [PATCH v3 0/3] spi: introduce `struct spi_delay` data-type,
Alexandru Ardelean
- [PATCH] iio: adc: axp288: Override TS pin bias current for some models,
Hans de Goede
- [RFC 0/4] counter: Simplify count_read/count_write/signal_read,
William Breathitt Gray
- [PATCH] staging: iio: ADIS16240: Remove unused include,
Rohit Sarkar
- Re: Problems during compiling in kernel modules,
Rohit Sarkar
- [PATCH] iio: adc: stm32-adc: fix a race when using several adcs with dma and irq,
Fabrice Gasnier
- [PATCH v8 0/5] enable motion events for st_lsm6dsx,
Sean Nyekjaer
- [PATCH v2 0/4] spi: introduce `struct spi_delay` data-type,
Alexandru Ardelean
- [RFC PATCH 00/15] Unify SPI delays into an `struct spi_delay`,
Alexandru Ardelean
- [RFC PATCH 02/15] spi: introduce spi_delay struct as "value + unit" & spi_delay_exec(), Alexandru Ardelean
- [RFC PATCH 03/15] spi: make `cs_change_delay` the first user of the `spi_delay` logic, Alexandru Ardelean
- [RFC PATCH 05/15] spi: sprd: convert transfer word delay to spi_delay struct, Alexandru Ardelean
- [RFC PATCH 08/15] spi: core,atmel: convert `word_delay_usecs` -> `word_delay` for spi_device, Alexandru Ardelean
- [RFC PATCH 11/15] spi: tegra114: use `spi_transfer_delay` helper, Alexandru Ardelean
- [RFC PATCH 01/15] spi: move `cs_change_delay` backwards compat logic outside switch, Alexandru Ardelean
- [RFC PATCH 04/15] iio: imu: adis: convert cs_change_delay to spi_delay struct, Alexandru Ardelean
- [RFC PATCH 07/15] spi: spidev: use new `word_delay` field for spi transfers, Alexandru Ardelean
- [RFC PATCH 06/15] spi: orion: use new `word_delay` field for SPI transfers, Alexandru Ardelean
- [RFC PATCH 09/15] spi: introduce `delay` field for `spi_transfer` + spi_transfer_exec(), Alexandru Ardelean
- [RFC PATCH 12/15] spi: spi-loopback-test: use new `delay` field, Alexandru Ardelean
- [RFC PATCH 13/15] spi: spidev: use new `delay` field for spi transfers, Alexandru Ardelean
- [RFC PATCH 14/15] spi: tegra114: change format for `spi_set_cs_timing()` function, Alexandru Ardelean
- [RFC PATCH 15/15] spi: implement SW control for CS times, Alexandru Ardelean
- [RFC PATCH 10/15] spi: use new `spi_transfer_delay` helper where straightforward, Alexandru Ardelean
- Re: [RFC PATCH 00/15] Unify SPI delays into an `struct spi_delay`, Jonathan Cameron
- [PATCH v2] dt-bindings: iio: accel: add binding documentation for ADIS16240,
Rodrigo Carvalho
- [PATCH 0/4] Fixes for ad7949,
Andrea Merello
- Re: [PATCH 0/4] Fixes for ad7949, Ardelean, Alexandru
[PATCH v2 1/7] iio: imu: inv_mpu6050: disable i2c mux for MPU925x,
Jean-Baptiste Maneyrol
[PATCH v2 0/7] add magnetometer support for MPU925x, Jean-Baptiste Maneyrol
[PATCH v7 0/5] enable motion events for st_lsm6dsx,
Sean Nyekjaer
[PATCH 0/2] enable LIR and clear_on_read for st_lsm6dsx,
Lorenzo Bianconi
[PATCH v2 3/3] iio: accel: adxl372: Perform a reset at start up,
Stefan Popa
[PATCH v2 2/3] iio: accel: adxl372: Fix push to buffers lost samples,
Stefan Popa
[PATCH v2 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples,
Stefan Popa
[PATCH 1/2] iio: temperature: Add support for LTC2983,
Nuno Sá
[PATCH] iio: max31856: add missing of_node and parent references to iio_dev,
Andrea Merello
[PATCH v2 3/3] iio: adc: hx711: remove unnecessary returns,
Andreas Klinger
[PATCH v2 2/3] iio: adc: hx711: optimize performance in read cycle,
Andreas Klinger
[PATCH v2 1/3] iio: adc: hx711: fix bug in sampling of data,
Andreas Klinger
[PATCH v2 0/3] iio: adc: hx711: fix and optimize sampling of data, Andreas Klinger
[RFC/PATCH 0/1] Quadrature Encoder Support,
Felipe Balbi
[PATCH v6 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
[PATCH v5 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
[PATCH] dt-bindings: fix regulator names to not be constant.,
jic23
[PATCH 3/3] iio: adc: hx711: remove unnecessary returns,
Andreas Klinger
[PATCH 2/3] iio: adc: hx711: remove unnecessary read cycle, Andreas Klinger
[PATCH 1/3] iio: adc: hx711: optimize sampling of data,
Andreas Klinger
[PATCH 0/3] iio: adc: hx711: fix and optimize sampling of data, Andreas Klinger
[PATCH v2 01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema,
Krzysztof Kozlowski
- [PATCH v2 03/11] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 06/11] dt-bindings: arm: samsung: Convert Exynos Chipid bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 08/11] dt-bindings: arm: samsung: Convert Exynos System Registers bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 07/11] dt-bindings: arm: samsung: Convert Exynos PMU bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 09/11] dt-bindings: rtc: s3c: Convert S3C/Exynos RTC bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 11/11] dt-bindings: iio: adc: exynos: Remove old requirement of two register address ranges, Krzysztof Kozlowski
- [PATCH v2 10/11] dt-bindings: iio: adc: exynos: Convert Exynos ADC bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 02/11] dt-bindings: power: syscon-poweroff: Convert bindings to json-schema, Krzysztof Kozlowski
- [PATCH v2 04/11] dt-bindings: arm: samsung: Document missing S5Pv210 boards bindings, Krzysztof Kozlowski
- [PATCH v2 05/11] dt-bindings: arm: samsung: Document missing Exynos7 boards bindings, Krzysztof Kozlowski
- Re: [PATCH v2 01/11] dt-bindings: power: syscon-reboot: Convert bindings to json-schema, Rob Herring
Custom sysfs entries for persistence, gain & threshold in light sensor,
rishi gupta
[PATCH] [RFC] Revert "iio: hid-sensor-attributes: Convert to use int_pow()",
Arnd Bergmann
[PATCH v4 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
[PATCH v1] iio: hid-sensor-attributes: Fix divisions for 32-bit platforms,
Andy Shevchenko
Re: [staging:staging-testing 314/401] drivers/iio/common/hid-sensors/hid-sensor-attributes.c:312: undefined reference to `__udivdi3',
Jonathan Cameron
[PATCH v3 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core,
Sean Nyekjaer
[PULL v3] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.,
Jonathan Cameron
[PULL v2] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.,
Jonathan Cameron
[PATCH AUTOSEL 4.19 068/167] iio: adc: exynos-adc: Use proper number of channels for Exynos4x12, Sasha Levin
[PATCH AUTOSEL 4.19 066/167] iio: adc: exynos-adc: Add S5PV210 variant,
Sasha Levin
[PATCH AUTOSEL 4.19 155/167] iio: adc: gyroadc: fix uninitialized return code, Sasha Levin
[PATCH AUTOSEL 4.19 067/167] dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant, Sasha Levin
[PATCH 5/7 v3] mfd: ab8500: augment DT bindings,
Linus Walleij
[PATCH 6/8 v3] iio: adc: New driver for the AB8500 GPADC, Linus Walleij
[PATCH 3/3] iio: accel: adxl372: Make sure interrupts are disabled,
Stefan Popa
[PATCH 2/3] iio: accel: adxl372: Fix push to buffers lost samples,
Stefan Popa
[PATCH 1/3] iio: accel: adxl372: Fix/remove limitation for FIFO samples,
Stefan Popa
[PATCH] iio: imu: st_lsm6dsx: replace underscore with hyphen in device name,
Martin Kepplinger
[PATCH V4 1/4] iio: adc: ad7192: Add sysfs ABI documentation,
Mircea Caprioru
[PATCH] iio: light: bh1750: Move static keyword to the front of declaration,
Krzysztof Wilczynski
[PATCH 1/2] dt-bindings: iio: accel: add binding documentation for ADIS16240,
Rodrigo Carvalho
[PATCH v3 0/6] counter: new TI eQEP driver,
David Lechner
Re: WARNING in __mark_chain_precision (2), syzbot
[PATCH] iio: light: cm36651: redundant assignment to variable ret,
Colin King
[PATCH] iio: adc: meson_saradc: Fix memory allocation order,
Remi Pommarel
[PATCH] iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity,
Lorenzo Bianconi
read_raw endianess,
Alexander Stein
[PATCH 0/8] add magnetometer support for MPU925x,
Jean-Baptiste Maneyrol
[PATCH v1 1/1] iio: fix center temperature of bmc150-accel-core,
Pascal Bouwmann
[PULL] Second set of new device support, cleanups etc for IIO in the 5.4 cycle.,
Jonathan Cameron
[PATCH] iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1,
Lorenzo Bianconi
[PATCH] iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1,
Lorenzo Bianconi
[PATCH 0/2] iio: core: Add optional symbolic label to device attributes,
Phil Reid
[PATCH v2] iio: cros_ec: set calibscale for 3d MEMS to unit vector,
Gwendal Grignou
Re: Linux Kernel: Bug in the bmc150 driver, Jonathan Cameron
buffer read,
Grim, Dennis
[PATCH v2 0/1] counter: cros_ec: Add sync sensor driver,
Fabien Lahoudere
[RFC 1/9] dt-bindings: arm: samsung: Convert Samsung board/soc bindings to json-schema,
Krzysztof Kozlowski
[PATCH -next] iio: st_sensors: Fix build error,
YueHaibing
[PATCH 0/8 v2] AB8500 GPADC MFD to IIO conversion,
Linus Walleij
[PATCH] iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo,
Mario Tesi
[PATCH v2 1/1] iio: core: Fix fractional format generation,
Alexander Stein
[PATCH 1/1] iio: core: Fix fractional format generation,
Alexander Stein
[PATCH v3 1/4] iio: adc: ad7606: Add support for AD7606B ADC,
Beniamin Bia
[PATCH v5 0/4] iio: imu: st_lsm6dsx: Add support for LSM9DS1,
Martin Kepplinger
read buffer,
Grim, Dennis
[PATCH 0/4] iio: adc: ina2xx: Improve device identification,
Michal Simek
[PATCH AUTOSEL 4.19 13/27] iio: adc: max9611: Fix temperature reading in probe, Sasha Levin
[PATCH AUTOSEL 5.2 20/44] iio: adc: max9611: Fix temperature reading in probe, Sasha Levin
[PATCH AUTOSEL 4.14 02/12] iio: adc: max9611: Fix temperature reading in probe, Sasha Levin
[PATCH] iio: cros_ec: set calibscale for 3d MEMS to unit vector,
Gwendal Grignou
[PATCH v2] dt-bindings: iio: light: isl29501: Rename bindings documentation file,
Simon Horman
[PATCH] dt-bindings: iio: light: isl29501: Rename bindings documentation file,
Simon Horman
[PATCH] iio: imu: st_lsm6dsx: introduce update_fifo function pointer,
Lorenzo Bianconi
[PATCH] Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section,
Christophe JAILLET
[PATCH] iio: accel: kxcjk1013: Improve comments on KIOX010A and KIOX020A ACPI ids,
Hans de Goede
[PATCH] iio: imu: adis16460: fix variable signedness,
Alexandru Ardelean
[PATCH] iio: dac: ad5380: fix incorrect assignment to val,
Colin King
static analysis bug report in drivers/staging/iio/dac/ad5380.c,
Colin Ian King
[bug report] iio: imu: Add support for the ADIS16460 IMU, Dan Carpenter
[PATCH][iio-next] iio: light: noa1305: fix missing break in a switch statement,
Colin King
[PATCH] iio: max5487: use devres for iio device registration, Martin Kaiser
[PATCH] iio: max5481: use devres for iio device registration,
Martin Kaiser
[PATCH] staging:iio:meter add driver for ADE9000,
Leonard Pollak
[PATCH V3 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency,
Mircea Caprioru
[PATCH AUTOSEL 5.2 008/123] IIO: Ingenic JZ47xx: Set clock divider on probe, Sasha Levin
[PATCH AUTOSEL 5.2 010/123] iio: imu: mpu6050: add missing available scan masks, Sasha Levin
[PATCH AUTOSEL 5.2 009/123] iio: cros_ec_accel_legacy: Fix incorrect channel setting, Sasha Levin
[PATCH AUTOSEL 4.19 01/68] iio: adc: max9611: Fix misuse of GENMASK macro,
Sasha Levin
[PATCH AUTOSEL 4.14 01/44] iio: adc: max9611: Fix misuse of GENMASK macro, Sasha Levin
[PATCH AUTOSEL 5.2 007/123] iio: adc: max9611: Fix misuse of GENMASK macro, Sasha Levin
[PATCH v2] staging: iio: accel: adis16240: Improve readability on write_raw function,
Rodrigo Ribeiro
[PATCH] iio:light:noa1305: Fix missing break statement.,
Jonathan Cameron
Add ADE9000 driver to staging:iio:meter?,
Pollak, Leonard
[PATCH V2 1/4] staging: iio: adc: ad7192: Add low_pass_3db_filter_frequency,
Mircea Caprioru
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
