Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH v3 5/7] IIO: add bindings for stm32 timer trigger driver, (continued)
- [PATCH 10/39] Annotate hardware config module parameters in drivers/iio/,
David Howells
- [PATCH v2 0/2] add support to STM LSM6DS3-LSM6DSM 6-axis Mems sensor,
Lorenzo Bianconi
- [PATCH] staging: iio: replace symbolic permission,
Amit Kumar Kushwaha
- [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes,
Peter Rosin
- [PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio, Peter Rosin
- [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux, Peter Rosin
- [PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver, Peter Rosin
- [PATCH v6 6/9] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings, Peter Rosin
- [PATCH v6 7/9] i2c: i2c-mux-simple: new driver, Peter Rosin
- [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings, Peter Rosin
- [PATCH v6 3/9] iio: inkern: api for manipulating ext_info of iio channels, Peter Rosin
- [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G, Peter Rosin
- [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller, Peter Rosin
- Re: [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes, Jonathan Cameron
- Ad5064 SPI probe not called,
Akshay Vijapur
- [PATCH] iio: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8,
William Breathitt Gray
- [PATCH] iio: 104-quad-8: Fix active level mismatch for the preset enable option,
William Breathitt Gray
- [PATCH] iio: misc: add a generic regulator driver,
Bartosz Golaszewski
- [PATCH v5 0/9] mux controller abstraction and iio/i2c muxes,
Peter Rosin
- [PATCH v2] iio: accel: hid-sensor-accel-3d: Add timestamp,
Srinivas Pandruvada
- [PATCH] iio: 104-quad-8: Fix off-by-one errors when addressing IOR,
William Breathitt Gray
- [PATCH] iio: 104-quad-8: Fix index control configuration,
William Breathitt Gray
- [PATCH v4] iio: adc: New driver for TI ADS7950 chips,
David Lechner
- [PATCH] Staging: iio: adc: fix macro and sysfs files modes in ad7280a.c,
Boyan Vladinov
- [PATCH v3] Staging: iio: adc: fix sysfs files modes in ad7192.c,
Boyan Vladinov
- [PATCH] IIO: Change msleep to usleep_range for small msecs,
Aniroop Mathur
[PATCH] iio: cros_ec_light_prox: add ChromeOS EC Light and Proximity Sensors,
Enric Balletbo i Serra
[PATCH 0/2] more quirks for hid-sensor-hub,
Benjamin Tissoires
[PATCH v2] Staging: iio: adc: fix sysfs files modes in ad7192.c,
Boyan Vladinov
[PULL] 4th set of IIO new device support, features and cleanups for the 4.10 cycle.,
Jonathan Cameron
[PATCH v4 0/7] mux controller abstraction and iio/i2c muxes,
Peter Rosin
[PATCH v2 0/7] Add pwm and IIO timer drivers for stm32,
Benjamin Gaignard
[PATCH] iio: humidity: Support acpi probe for hts211,
Shrirang Bagul
[PATCH 0/3] iio: st_sensors: Support ACPI probe for st_sensors,
Shrirang Bagul
[PATCH V5 0/2] Changes to support different VADC scaling,
Rama Krishna Phani A
acpi-als taking over from hwmon for light sensor support?,
Bastien Nocera
[PATCH] Staging: iio: adc: fix sysfs files modes in ad7192.c,
Boyan Vladinov
[PATCH 0/7] Add pwm and IIO timer drivers for stm32,
Benjamin Gaignard
[PATCH v8 0/8] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values),
H. Nikolaus Schaller
- [PATCH v8 8/8] DT:omap3+ads7846: use new common touchscreen bindings, H. Nikolaus Schaller
- [PATCH v8 4/8] DT:omap3+tsc2007: use new common touchscreen bindings, H. Nikolaus Schaller
- [PATCH v8 6/8] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory, H. Nikolaus Schaller
- [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature, H. Nikolaus Schaller
- [PATCH v8 2/8] drivers:input:tsc2007: check for presence and power down tsc2007 during probe, H. Nikolaus Schaller
- [PATCH v8 5/8] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping, H. Nikolaus Schaller
- [PATCH v8 7/8] drivers:input:ads7846(+tsc2046): fix spi module table, H. Nikolaus Schaller
- [PATCH v8 1/8] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation, H. Nikolaus Schaller
ACPI DSDT support for mount-matrix?,
Bastien Nocera
[PATCH 1/2] iio: adis1620x: Fix mixed up device descriptions,
Reto Schneider
[PATCH 2/2] iio: adis16203: Fix copyright year,
Reto Schneider
[PATCH v3] iio: adc: New driver for TI ADS7950 chips,
David Lechner
[PATCH] iio: accel: mma8452: define unsigned return values where appropriate,
Martin Kepplinger
[PATCH v3 0/7] mux controller abstraction and iio/i2c muxes,
Peter Rosin
[PATCH v2] iio: adc: New driver for TI ADS7950 chips,
David Lechner
[PATCH v10 0/5] mxs-lradc: Split driver into MFD,
Ksenija Stanojevic
[PATCH] staging: iio: ad9832:,
Christophe JAILLET
[PATCH] iio: adc: New driver for TI ADS79XX chips,
David Lechner
[PATCH] iio: accel: hid-sensor-accel-3d: Add timestamp,
Srinivas Pandruvada
[patch] iio: tsl2583: off by one in in_illuminance_lux_table_store(),
Dan Carpenter
[RFC PATCH v2 0/7] mux controller abstraction and iio/i2c muxes,
Peter Rosin
[RFC PATCH 0/7] mux controller astraction and iio/i2c muxes,
Peter Rosin
[PATCH v2] iio: common: st_sensors: fix channel data parsing,
Lorenzo Bianconi
[PATCH v2] iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor,
Ooi, Joyce
[PATCH v3 0/6] Add support for STM32 ADC,
Fabrice Gasnier
[bug report] staging: iio: ad9832: clean-up regulator 'reg',
Dan Carpenter
[PATCH V4] hid: hid-sensor-hub: clear memory to avoid random data,
Song Hongyan
[PATCH v2] iio: accel: st_accel: inline per-sensor data,
Linus Walleij
[PATCH v3] hid: hid-sensor-hub: clear memory to avoid random data,
Song Hongyan
[PULL] 3rd set of new drivers, features and cleanups for IIO in the 4.10 cycle,
Jonathan Cameron
[PATCH v4 00/26] staging: iio: tsl2583: move out of staging,
Brian Masney
- [PATCH v4 26/26] staging: iio: tsl2583: move out of staging, Brian Masney
- [PATCH v4 25/26] staging: iio: tsl2583: add copyright and MODULE_AUTHOR, Brian Masney
- [PATCH v4 23/26] staging: iio: tsl2583: remove unnecessary memset call, Brian Masney
- [PATCH v4 24/26] staging: iio: tsl2583: remove unnecessary variable initialization, Brian Masney
- [PATCH v4 21/26] staging: iio: tsl2583: clarified comment about clearing interrupts, Brian Masney
- [PATCH v4 22/26] staging: iio: tsl2583: remove comment for tsl2583_probe(), Brian Masney
- [PATCH v4 20/26] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header, Brian Masney
- [PATCH v4 19/26] staging: iio: tsl2583: move from a global to a per device lux table, Brian Masney
- [PATCH v4 18/26] staging: iio: tsl2583: don't assume an unsigned int is 32 bits, Brian Masney
- [PATCH v4 17/26] staging: iio: tsl2583: remove unnecessary parentheses, Brian Masney
- [PATCH v4 16/26] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success, Brian Masney
- [PATCH v4 15/26] staging: iio: tsl2583: moved code block inside else statement, Brian Masney
- [PATCH v4 13/26] staging: iio: tsl2583: fix multiline comment syntax, Brian Masney
- [PATCH v4 14/26] staging: iio: tsl2583: updated code comment to match what the code does, Brian Masney
- [PATCH v4 08/26] staging: iio: tsl2583: unify function and variable prefix to tsl2583_, Brian Masney
- [PATCH v4 12/26] staging: iio: tsl2583: combine sysfs documentation, Brian Masney
- [PATCH v4 10/26] staging: iio: tsl2583: fix comparison between signed and unsigned integers, Brian Masney
- [PATCH v4 11/26] staging: iio: tsl2583: change newlines to improve readability, Brian Masney
- [PATCH v4 09/26] staging: iio: tsl2583: fix alignment of #define values, Brian Masney
- [PATCH v4 07/26] staging: iio: tsl2583: cleaned up logging, Brian Masney
- [PATCH v4 06/26] staging: iio: tsl2583: remove the FSF's mailing address, Brian Masney
- [PATCH v4 05/26] staging: iio: tsl2583: remove redundant write to the control register in taos_probe(), Brian Masney
- [PATCH v4 02/26] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux, Brian Masney
- [PATCH v4 01/26] staging: iio: tsl2583: check if chip is in a working state in in_illuminance_calibrate_store, Brian Masney
- [PATCH v4 03/26] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume, Brian Masney
- [PATCH v4 04/26] staging: iio: tsl2583: change current chip state from a tristate to a bool, Brian Masney
[PATCH] iio: twl4030-madc: convert to DT only,
Nicolae Rosia
[PATCH v7 0/9] drivers: touchscreen: tsc2007 and ads7846/tsc2046 improvements (use common touchscreen bindings, pre-calibration, spi fix and provide iio raw values),
H. Nikolaus Schaller
- [PATCH v7 3/9] drivers:input:tsc2007: check for presence and power down tsc2007 during probe, H. Nikolaus Schaller
- [PATCH v7 5/9] DT:omap3+tsc2007: use new common touchscreen bindings, H. Nikolaus Schaller
- [PATCH v7 1/9] drivers:input:tsc2007: add new common binding names, pre-calibration, flipping and rotation, H. Nikolaus Schaller
- [PATCH v7 2/9] drivers:input:tsc2007: send pendown and penup only once like ads7846(+tsc2046) driver does, H. Nikolaus Schaller
- [PATCH v7 4/9] drivers:input:tsc2007: add iio interface to read external ADC input and temperature, H. Nikolaus Schaller
- [PATCH v7 7/9] dt-bindings: input: move ads7846 bindings to touchscreen subdirectory, H. Nikolaus Schaller
- [PATCH v7 6/9] drivers:input:ads7846(+tsc2046): add new common binding names, pre-calibration and flipping, H. Nikolaus Schaller
- [PATCH v7 9/9] DT:omap3+ads7846: use new common touchscreen bindings, H. Nikolaus Schaller
- [PATCH v7 8/9] drivers:input:ads7846(+tsc2046): fix spi module table, H. Nikolaus Schaller
[PATCH 0/2] staging: iio: ad7606: move driver out of staging,
Eva Rachel Retuya
[PATCH v2] hid: hid-sensor-hub: clear memory to avoid random data,
Song Hongyan
[patch] iio: cros_ec_sensors_core: signedness bug in cros_ec_sensors_read_lpc(),
Dan Carpenter
[patch] iio:adc: ad7766: testing the wrong variable in probe,
Dan Carpenter
[PATCH v2 0/6] Add support for STM32 ADC,
Fabrice Gasnier
[PATCH 2/2] iio: st_sensors: centralize SPI probe() code, Linus Walleij
[PATCH 1/2] iio: st_sensors: centralize I2C probe() code,
Linus Walleij
[PATCH v3 00/28] staging: iio: tsl2583: move out of staging,
Brian Masney
- [PATCH v3 06/28] staging: iio: tsl2583: change current chip state from a tristate to a bool, Brian Masney
- [PATCH v3 23/28] staging: iio: tsl2583: clarified comment about clearing interrupts, Brian Masney
- [PATCH v3 27/28] staging: iio: tsl2583: add copyright and MODULE_AUTHOR, Brian Masney
- [PATCH v3 28/28] staging: iio: tsl2583: move out of staging, Brian Masney
- [PATCH v3 17/28] staging: iio: tsl2583: moved code block inside else statement, Brian Masney
- [PATCH v3 26/28] staging: iio: tsl2583: remove unnecessary variable initialization, Brian Masney
- [PATCH v3 25/28] staging: iio: tsl2583: remove unnecessary memset call, Brian Masney
- [PATCH v3 24/28] staging: iio: tsl2583: remove comment for tsl2583_probe(), Brian Masney
- [PATCH v3 15/28] staging: iio: tsl2583: fix multiline comment syntax, Brian Masney
- [PATCH v3 21/28] staging: iio: tsl2583: move from a global to a per device lux table, Brian Masney
- [PATCH v3 12/28] staging: iio: tsl2583: fix comparison between signed and unsigned integers, Brian Masney
- [PATCH v3 05/28] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume, Brian Masney
- [PATCH v3 22/28] staging: iio: tsl2583: add tsl2583 to list of supported devices in the header, Brian Masney
- [PATCH v3 03/28] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store, Brian Masney
- [PATCH v3 18/28] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success, Brian Masney
- [PATCH v3 19/28] staging: iio: tsl2583: remove unnecessary parentheses, Brian Masney
- [PATCH v3 20/28] staging: iio: tsl2583: don't assume an unsigned int is 32 bits, Brian Masney
- [PATCH v3 16/28] staging: iio: tsl2583: updated code comment to match what the code does, Brian Masney
- [PATCH v3 13/28] staging: iio: tsl2583: change newlines to improve readability, Brian Masney
- [PATCH v3 04/28] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux, Brian Masney
- [PATCH v3 14/28] staging: iio: tsl2583: combine sysfs documentation, Brian Masney
- [PATCH v3 09/28] staging: iio: tsl2583: cleaned up logging, Brian Masney
- [PATCH v3 07/28] staging: iio: tsl2583: remove redundant write to the control register in taos_probe(), Brian Masney
- [PATCH v3 08/28] staging: iio: tsl2583: remove the FSF's mailing address, Brian Masney
- [PATCH v3 10/28] staging: iio: tsl2583: unify function and variable prefix to tsl2583_, Brian Masney
- [PATCH v3 11/28] staging: iio: tsl2583: fix alignment of #define values, Brian Masney
- [PATCH v3 02/28] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip, Brian Masney
- [PATCH v3 01/28] staging: iio: tsl2583: split out functionality of taos_chip_on(), Brian Masney
[PATCH] iio: cros_ec_sensors_core: fix unsigned compared less than zero on status,
Colin King
[PATCH 0/4] ST Sensors: inline sensor data,
Linus Walleij
[PATCH v2] iio: document bindings for mounting matrices,
Linus Walleij
[PATCH] staging: iio: ad9832: allocate data before using,
Arnd Bergmann
[PATCH] staging: iio: tsl2583: fix unused function warning,
Arnd Bergmann
[PATCH 1/2] iio: gyro: mpu3050: remove duplicate initializer,
Arnd Bergmann
[PATCH v4 0/8] IIO wrapper drivers, dpot-dac and envelope-detector,
Peter Rosin
- [PATCH v4 5/8] dt-bindings: iio: document dpot-dac bindings, Peter Rosin
- [PATCH v4 1/8] iio:core: add a callback to allow drivers to provide _available attributes, Peter Rosin
- [PATCH v4 8/8] iio: envelope-detector: ADC driver based on a DAC and a comparator, Peter Rosin
- [PATCH v4 4/8] dt-bindings: add axentia to vendor-prefixes, Peter Rosin
- [PATCH v4 6/8] iio: dpot-dac: DAC driver based on a digital potentiometer, Peter Rosin
- [PATCH v4 3/8] iio: mcp4531: provide range of available raw values, Peter Rosin
- [PATCH v4 7/8] dt-bindings: iio: document envelope-detector bindings, Peter Rosin
- [PATCH v4 2/8] iio: inkern: add helpers to query available values from channels, Peter Rosin
- Re: [PATCH v4 0/8] IIO wrapper drivers, dpot-dac and envelope-detector, Jonathan Cameron
[PATCH V4 0/2] Changes to support different VADC scaling,
Rama Krishna Phani A
[PATCH v2 00/23] staging: iio: tsl2583: move out of staging,
Brian Masney
- [PATCH v2 08/23] staging: iio: tsl2583: remove the FSF's mailing address, Brian Masney
- [PATCH v2 07/23] staging: iio: tsl2583: remove redundant write to the control register in taos_probe(), Brian Masney
- [PATCH v2 10/23] staging: iio: tsl2583: unify function and variable prefix to tsl2583_, Brian Masney
- [PATCH v2 09/23] staging: iio: tsl2583: cleaned up logging, Brian Masney
- [PATCH v2 04/23] staging: iio: tsl2583: remove unnecessary chip status check in taos_get_lux, Brian Masney
- [PATCH v2 05/23] staging: iio: tsl2583: remove unnecessary chip status checks in suspend/resume, Brian Masney
- [PATCH v2 06/23] staging: iio: tsl2583: change current chip state from a tristate to a bool, Brian Masney
- [PATCH v2 03/23] staging: iio: tsl2583: check if chip is suspended in in_illuminance_calibrate_store, Brian Masney
- [PATCH v2 02/23] staging: iio: tsl2583: fix issue with changes to calibscale and int_time not being set on the chip, Brian Masney
- [PATCH v2 01/23] staging: iio: tsl2583: split out functionality of taos_chip_on(), Brian Masney
- [PATCH v2 11/23] staging: iio: tsl2583: fix alignment of #define values, Brian Masney
- [PATCH v2 19/23] staging: iio: tsl2583: remove unnecessary parentheses, Brian Masney
- [PATCH v2 22/23] staging: iio: tsl2583: updated copyright and MODULE_AUTHOR, Brian Masney
- [PATCH v2 12/23] staging: iio: tsl2583: fix comparison between signed and unsigned integers, Brian Masney
- [PATCH v2 15/23] staging: iio: tsl2583: fix multiline comment syntax, Brian Masney
- [PATCH v2 20/23] staging: iio: tsl2583: don't assume an unsigned int is 32 bits, Brian Masney
- [PATCH v2 13/23] staging: iio: tsl2583: change newlines to improve readability, Brian Masney
- [PATCH v2 21/23] staging: iio: tsl2583: move from a global to a per device lux table, Brian Masney
- [PATCH v2 16/23] staging: iio: tsl2583: updated code comment to match what the code does, Brian Masney
- [PATCH v2 14/23] staging: iio: tsl2583: combine sysfs documentation, Brian Masney
- [PATCH v2 18/23] staging: iio: tsl2583: change tsl2583_als_calibrate() to return 0 on success, Brian Masney
- [PATCH v2 17/23] staging: iio: tsl2583: moved code block inside else statement, Brian Masney
- [PATCH v2 23/23] staging: iio: tsl2583: move out of staging, Brian Masney
[PATCH] hid: hid-sensor-hub: clear memory to avoid random data,
Song Hongyan
[PULL] Second set of IIO fixes for the 4.9 cycle.,
Jonathan Cameron
[PULL] Second set of IIO new device support and cleanups for the 4.10 cycle.,
Jonathan Cameron
regmap and i2c_smbus_write_byte question,
Brian Masney
Re: [PATCH v7 3/3] iio: adc: add support for Allwinner SoCs ADC, Julia Lawall
[PATCH 0/9] staging: iio: tsl2583: i2c cleanups,
Brian Masney
[PATCH 1/2] iio: bmi160: Support hardware fifo,
Marcin Niestroj
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
