Hi, I send this as an RFC, as I'm digging to try to get as generic as possible GPIO based trigger support, as discussed earlier in other patchset "Add EXTI GPIO trigger support to STM32 ADC": https://www.spinics.net/lists/arm-kernel/msg559091.html Following various comments on this, I sent this RFC to address two topics, that I see as possible prerequisite: - Add trigger OF support - GPIO based trigger Please feel free to advise. Best Regards. Fabrice Gasnier (4): dt-bindings: iio: introduce trigger providers, consumers iio: trigger: add OF support dt-bindings: iio: add support for GPIO triggers iio: trigger: add GPIO trigger .../devicetree/bindings/iio/iio-bindings.txt | 37 +++++++ .../bindings/iio/trigger/iio-trig-gpio.txt | 26 +++++ drivers/iio/industrialio-trigger.c | 100 ++++++++++++++++++ drivers/iio/trigger/Kconfig | 9 ++ drivers/iio/trigger/Makefile | 1 + drivers/iio/trigger/iio-trig-gpio.c | 112 +++++++++++++++++++++ include/linux/iio/trigger.h | 4 + 7 files changed, 289 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/trigger/iio-trig-gpio.txt create mode 100644 drivers/iio/trigger/iio-trig-gpio.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
