Hi Jonathan,
On 19/02/2017 13:40, Jonathan Cameron wrote:
> On 14/02/17 09:40, Quentin Schulz wrote:
>> The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the
>> battery voltage, battery charge and discharge currents, AC-in and VBUS
>> voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature.
>>
>> This adds support for most of AXP20X and AXP22X ADCs.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
>> Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> Hi Quentin,
>
> A few bits and bobs inline. The bigest one is that I don't think
> you need to carry your struct axp_data pointer around in the iio_priv
> structure as it only seems to be used in probe.
>
> Anyhow, tidy these little bits up (quite a few are optional in the
> sense that they are a matter or personal taste and I don't feel
> strongly about them) and you can add
>
> Reviewed-by: Jonathan Cameron <jic23@xxxxxxxxxx>
>
> A nice driver.
>
> Jonathan
[...]
>> +static int axp20x_probe(struct platform_device *pdev)
>> +{
>> + struct axp20x_adc_iio *info;
>> + struct iio_dev *indio_dev;
>> + struct axp20x_dev *axp20x_dev;
>> + int ret;
>> +
>> + axp20x_dev = dev_get_drvdata(pdev->dev.parent);
>> +
>> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + info = iio_priv(indio_dev);
>> + platform_set_drvdata(pdev, indio_dev);
>> +
>> + info->regmap = axp20x_dev->regmap;
>> + indio_dev->dev.parent = &pdev->dev;
>> + indio_dev->dev.of_node = pdev->dev.of_node;
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> +
>> + info->data = (struct axp_data *)platform_get_device_id(pdev)->driver_data;
> I think this is only actually used in probe, so could be handled more
> neatly with a local variable rather than sticking it in info.
>
[...]
>> +static int axp20x_remove(struct platform_device *pdev)
>> +{
>> + struct axp20x_adc_iio *info;
>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> +
>> + info = iio_priv(indio_dev);
> Reorder the two lines above this one and then you could just do this
> inline. (really trivial so feel free to not bother ;)
>> +
>> + iio_device_unregister(indio_dev);
>> + iio_map_array_unregister(indio_dev);
>> +
>> + regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>> +
>> + if (info->data->adc_en2)
data is used here to know if I should disable misc ADCs (if supported by
the PMIC). So kinda need it only for that purpose, maybe I can use a
slightly simpler structure to only store regmap and this adc_en2 boolean.
Ack for everything else.
Thanks,
Quentin
--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
