Re: [PATCH 1/2] dt-bindings: iio: stm32-adc: add option to set resolution

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/02/17 16:04, Fabrice Gasnier wrote:
> On 02/19/2017 01:09 PM, Jonathan Cameron wrote:
>> On 15/02/17 16:55, Fabrice Gasnier wrote:
>>> Add documentation for 'st,adc-res' dt optional property.
>>>
>>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
>> I'm happy with this, but would like to leave time for a device tree review.
>>
>> Ultimately we may well want to make this a generic property and call it something
>> like adc-resolution but perhaps we need to wait until we have a few more devices
>> supporting setting it via device tree to figure out what the best interface is.
>> It would exactly be a problem to support this as a deprecated binding at that
>> point.
> 
> Hi Jonathan,
> 
> I agree with you on this... It may be better to have generic property
> for this, especially if you see that it will come in the near future.
> May I suggest this prop to be less restrictive, e.g. like
> resolution-bits as is may also be worth for other device types, e.g.
> DAC as an example ?>
Sure, why not - no loss of meaning here.  We may never use it for anything
else but that doesn't matter.
>>
>> Give me a poke if we hear nothing from Rob or Mark for say another week.
> 
> No news yet, but it can wait a little longer.
Rob / Mark, can you take a look at this if you have time?

Thanks,

Jonathan
> 
> Please advise,
> Regards,
> Fabrice
> 
>>
>> Thanks,
>>
>> Jonathan
>>
>>> ---
>>>  Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 4 ++++
>>>  1 file changed, 4 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>>> index 5dfc88e..45f7ff2 100644
>>> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
>>> @@ -57,6 +57,9 @@ Optional properties:
>>>  - dmas: Phandle to dma channel for this ADC instance.
>>>    See ../../dma/dma.txt for details.
>>>  - dma-names: Must be "rx" when dmas property is being used.
>>> +- st,adc-res: Resolution (bits) to use for conversions. Must match device
>>> +  available resolutions (e.g. can be 6, 8, 10 or 12 on stm32f4). Default
>>> +  is maximum resolution if unset.
>>>
>>>  Example:
>>>      adc: adc@40012000 {
>>> @@ -84,6 +87,7 @@ Example:
>>>              st,adc-channels = <8>;
>>>              dmas = <&dma2 0 0 0x400 0x0>;
>>>              dma-names = "rx";
>>> +            st,adc-res = <8>;
>>>          };
>>>          ...
>>>          other adc child nodes follow...
>>>
>>
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux