Linux IDE Archive
[Prev Page][Next Page]
- Re: [patch 01/20] git-libata-all: sata_via build fix
- sata_mv hotplug status?
- Re: libata reset-seq merge broke sata_sil on sh
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- [PATCH 7/7] libata: ack unexpected INTRQ when polling
- [PATCH 6/7] libata: push part of the irq driven pio out to workqueue
- [PATCH 5/7] libata: move and reduce locking to the pio data xfer functions
- [PATCH 4/7] libata: move polling idle irq check to ata_host_intr()
- [PATCH 3/7] libata: move ata_altstatus() out to the pio data xfer functions
- [PATCH 2/7] libata: move the ata_altstatus() in ata_hsm_qc_complete()
- [PATCH 1/7] libata: set the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST
- [PATCH/RFC] Fix build failure for drivers/ata/pata_scc.c
- [PATCH/RFC 0/7] libata: push part of irq driven pio to workqueue
- [PATCH] drivers/ata/pata_hpt37x.c Remove unused static variable.
- [patch 19/20] SCSI: save disk in scsi_device
- [patch 20/20] libata: send event when AN received
- [patch 18/20] genhd: send async notification on media change
- [patch 1/2] sl82c105: Switch to ref counting API
- [patch 2/2] Use menuconfig objects: IDE
- [patch 07/20] pata_pcmcia: recognize 2GB CompactFlash from Transcend
- [patch 11/20] libata: add support for ATA_16 on ATAPI
- [patch 13/20] Use menuconfig objects: libata
- [patch 09/20] Add the combined mode for ATI SB700
- [patch 17/20] libata: expose AN to user space
- [patch 12/20] libata-core: convert to use cancel_rearming_delayed_work()
- [patch 15/20] genhd: expose AN to user space
- [patch 10/20] add the ATI SB700 SATA controller device id to AHCI pci table
- [patch 16/20] scsi: expose AN to user space
- [patch 04/20] pata_acpi: restore driver
- [patch 14/20] libata: check for AN support
- [patch 05/20] pata_acpi-restore-driver versus libata-clean-up-sff-init-mess
- [patch 02/20] libata: clean up SFF init mess
- [patch 06/20] Optional LED trigger for libata
- [patch 08/20] drivers/ata: remove the wildcard from sata_nv driver
- [patch 01/20] git-libata-all: sata_via build fix
- [patch 03/20] libata-acpi: add infrastructure for drivers to use _GTM/_STM methods
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata reset-seq merge broke sata_sil on sh
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [FW ide-cs] Re: jvc cdrom drive lockup
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- sata_promise: which version/patch to test?
- [PATCH pata-2.6 fix queue] cmd64x: init. code cleanup
- [PATCH pata-2.6 fix queue] cmd64x: init. code cleanup
- Device Support
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [patch 1/7] libata: check for AN support
- Re: [FW ide-cs] Re: jvc cdrom drive lockup
- Re: [PATCH] libata: add human-readable error value decoding
- Re: HDIO_DRIVE_CMD and hdparm
- Re: HDIO_DRIVE_CMD and hdparm
- Re: libata reset-seq merge broke sata_sil on sh
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: Possible Bug in sata_via when trying to burn
- Re: HDIO_DRIVE_CMD and hdparm
- Re: libata reset-seq merge broke sata_sil on sh
- Re: HDIO_DRIVE_CMD and hdparm
- HDIO_DRIVE_CMD and hdparm
- Re: libata reset-seq merge broke sata_sil on sh
- Re: libata reset-seq merge broke sata_sil on sh
- Re: [PATCH] libata: add human-readable error value decoding
- Re: [PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix
- libata reset-seq merge broke sata_sil on sh
- Re: [FW ide-cs] Re: jvc cdrom drive lockup
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- Re: [PATCH] pata_platform: don't use generic ata_port_start
- [PATCH] pata_platform: don't use generic ata_port_start
- [PATCH] libata: add human-readable error value decoding
- Re: [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop
- [git patches] libata fixes, minor updates
- Re: [PATCH] drivers/ata/pata_scc.c: compile error fix
- Re: [git patches] libata updates
- Re: [PATCH] libata: fix kernel-doc parameters
- Re: [PATCH] pata_scc: fix compilation
- Re: [PATCH] sata_via: add missing PM hooks
- Re: [PATCH] sata_nv: fix ADMA freeze/thaw/irq_clear issues
- Re: [PATCH] pata_pcmcia.c: add card ident for jvc cdrom
- Re: [PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix
- Re: [PATCH 2.6.21-mm1 1/2] sata_promise: fix another error decode regression
- Re: [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- Re: [PATCH] libata: fallback to the other IDENTIFY on device error
- [patch 7/7] libata: send event when AN received
- From: Kristen Carlson Accardi
- [patch 6/7] SCSI: save disk in scsi_device
- From: Kristen Carlson Accardi
- [patch 5/7] genhd: send async notification on media change
- From: Kristen Carlson Accardi
- [patch 4/7] libata: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 3/7] scsi: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 2/7] genhd: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- [patch 0/7] Asynchronous Notification for ATAPI devices (resend)
- From: Kristen Carlson Accardi
- Re: [git patches] IDE update
- Re: [git patches] IDE update
- Re: [git patches] IDE update
- Re: [patch 6/7] SCSI: save disk in scsi_device - resend
- Re: [git patches] IDE update
- Re: [patch 6/7] SCSI: save disk in scsi_device - resend
- From: Kristen Carlson Accardi
- Re: [git patches] IDE update
- Re: [git patches] IDE update
- [git patches] IDE update
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- Re: [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- Re: [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- Re: [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- Re: [patch] Add the device IDs for AMD/ATI SB700
- Re: Possible Bug in sata_via when trying to burn
- Re: [patch] Add the device IDs for AMD/ATI SB700
- Re: Possible Bug in sata_via when trying to burn
- Re: [patch] Add the device IDs for AMD/ATI SB700
- Re: [ide-cs] [PCI: fix race with pci_walk_bus and pci_destroy_dev] introduced [jvc cdrom drive lockup] problem
- Re: [patch] Add the device IDs for AMD/ATI SB700
- [PATCH] pci-quirks: disable MSI on RS400-200 and RS480, take #2
- =?utf-7?b?K0FGcy1wYXRjaCtBRjAtIEFkZCB0aGUgZGV2aWNlIElEcyBmb3IgQQ==?==?utf-7?b?TUQvQVRJIFNCNzAw?=
- Possible Bug in sata_via when trying to burn
- [PATCH] drivers/ata/pata_scc.c: compile error fix
- Re: [git patches] libata reset sequence update
- Re: [git patches] libata reset sequence update
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] Cleanup libata HPA support
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- [PATCH] pata_pcmcia.c: add card ident for jvc cdrom
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] Cleanup libata HPA support
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- [PATCH] libata: disable_irq() during polling IDENTIFY (take 2)
- [PATCH] Cleanup libata HPA support
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: [PATCH] sata_via: add missing PM hooks
- Re: [PATCH] sata_via: add missing PM hooks
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: [PATCH] libata: fallback to the other IDENTIFY on device error
- [git patches] libata reset sequence update
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] libata: fallback to the other IDENTIFY on device error
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] libata: fallback to the other IDENTIFY on device error
- [PATCH] libata: fallback to the other IDENTIFY on device error
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: [patch 6/7] SCSI: save disk in scsi_device - resend
- From: Kristen Carlson Accardi
- Re: [patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend
- From: Kristen Carlson Accardi
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: 2.6.21-mm1: many processes end up in D state
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: [PATCH] libata: disable_irq() during polling IDENTIFY
- [PATCH] libata: disable_irq() during polling IDENTIFY
- Re: regressions
- Re: [PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x
- Re: [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff
- Re: [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff
- [PATCH 2.6.21-mm1 2/2] sata_promise: SATAII-150/300 TX4 port numbering fix
- [PATCH 2.6.21-mm1 1/2] sata_promise: fix another error decode regression
- Re: [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 2)
- [SOLVED] Re: sata_promise - another sata dvd writer problem
- Re: sata_promise - another sata dvd writer problem
- Re: [FW ide-cs] Re: jvc cdrom drive lockup
- Re: pata_via problems
- sata_promise - another sata dvd writer problem
- pata_via problems
- Re: [patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: 2.6.21-mm1: many processes end up in D state
- [PATCH] sata_nv: fix ADMA freeze/thaw/irq_clear issues
- Re: [PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 2)
- From: Bartlomiej Zolnierkiewicz
- [PATCH pata-2.6] hpt366: simplify UltraDMA filtering (take 2)
- Re: [PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering
- [git patches] IDE updates
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] hpt366: simplify UltraDMA filtering
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH] use mutex instead of semaphore in IDE driver
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 2/2 pata-2.6] ide: make void and rename ide_dma_timeout() method
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 1/2 pata-2.6] ide: make void and rename ide_dma_lostirq() method
- From: Bartlomiej Zolnierkiewicz
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- [PATCH 1/2] ATA: sata_promise, do not freeze ports
- [PATCH 05/11] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- [PATCH 04/11] libata-acpi: clean up parameters and misc stuff
- [PATCH 01/11] libata: separate out ata_dev_reread_id()
- [PATCHSET] libata: improve ATA ACPI support, take#2
- [PATCH 08/11] libata-acpi: miscellaneous cleanups
- [PATCH 11/11] libata-acpi: implement _GTM/_STM support
- [PATCH 02/11] libata: during revalidation, check n_sectors after device is configured
- [PATCH 09/11] libata: reimplement ACPI invocation
- [PATCH 10/11] libata-acpi: remove redundant checks
- [PATCH 07/11] libata-acpi: clean up ata_acpi_exec_tfs()
- [PATCH 06/11] libata-acpi: implement ata_acpi_associate()
- [PATCH 03/11] libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/
- Re: Data corruption with sata_sil (Sil 3112)
- Re: 2.6.21-mm1: many processes end up in D state
- Re: Data corruption with sata_sil (Sil 3112)
- Re: [patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend
- From: Kristen Carlson Accardi
- Re: [patch 6/7] SCSI: save disk in scsi_device - resend
- Re: [patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- [PATCH 2/2] libata: implement libata.spindown_compat
- [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop
- [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff
- Re: 2.6.21-mm1: many processes end up in D state
- [PATCH pata-2.6 fix queue] hpt366: don't check enablebits for HPT36x
- Re: [patch 5/7] genhd: send async notification on media change
- From: Kristen Carlson Accardi
- [patch 7/7] libata: send event when AN received - resend
- From: Kristen Carlson Accardi
- [patch 6/7] SCSI: save disk in scsi_device - resend
- From: Kristen Carlson Accardi
- [patch 4/7] libata: expose AN to user space - resend
- From: Kristen Carlson Accardi
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- [patch 3/7] scsi: expose AN to user space - resend
- From: Kristen Carlson Accardi
- [patch 2/7] genhd: expose AN to user space - resend
- From: Kristen Carlson Accardi
- [patch 1/7] libata: check for AN support - resend
- From: Kristen Carlson Accardi
- [patch 0/7] Asynchronous Notification for ATAPI devices (v2) - resend
- From: Kristen Carlson Accardi
- Re: Fw: HPT366: 2.6.21 breaks HPT366 detection on boot
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: [PATCH] Re: 2.6.19.1, sata_sil: sata dvd writer doesn't work
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- RE: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: Recent ipr breakage (ata_do_eh api change)
- Recent ipr breakage (ata_do_eh api change)
- Re: 2.6.21-mm1: many processes end up in D state
- Re: 2.6.21-mm1: many processes end up in D state
- [FW ide-cs] Re: jvc cdrom drive
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- From: Matías Alejandro Torres
- [PATCH] sata_via: add missing PM hooks
- Re: [PATCH] sata_via: add missing PM hooks
- Re: [PATCH] sata_via: add missing PM hooks
- Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- From: Frank van Maarseveen
- Data corruption with sata_sil (Sil 3112)
- [PATCH] sata_via: add missing PM hooks
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- From: Frank van Maarseveen
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- Re: VIA VT6420 SATA suspend/resume problem in 2.6.20?
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: [PATCH] pata_scc: fix compilation
- [PATCH] pata_scc: fix compilation
- Re: VIA VT6420 SATA suspend/resume problem in 2.6.20?
- Re: ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- Re: [Fwd: Re: PATCH: libata: add support for ATA_16 on ATAPI]
- Re: flushing cache after block io
- Re: flushing cache after block io
- Re: sata_via (pata): problems when write cache is disabled
- Re: flushing cache after block io
- VIA VT6420 SATA suspend/resume problem in 2.6.20?
- Re: [Fwd: Re: PATCH: libata: add support for ATA_16 on ATAPI]
- Re: Problems w/ Sil3124 + Port Multiplier
- Re: Problems w/ Sil3124 + Port Multiplier
- From: Lars Michael Jogbäck
- Re: Problems w/ Sil3124 + Port Multiplier
- [Fwd: Re: PATCH: libata: add support for ATA_16 on ATAPI]
- Re: System freezes with kernel >2.6.19 - sata_nv [added crash info kern 2.6.21.1]
- Re: System freezes with kernel >2.6.19 - sata_nv [added crash info kern 2.6.21.1]
- Re: Problems w/ Sil3124 + Port Multiplier
- Re: Problems w/ Sil3124 + Port Multiplier
- From: Lars Michael Jogbäck
- Re: Problems w/ Sil3124 + Port Multiplier
- ASUS M2A-VM - AMD690G - SB600 Non-Raid-5 SATA - problem
- From: Srihari Vijayaraghavan
- Re: System freezes with kernel >2.6.19 - sata_nv [added crash info kern 2.6.21.1]
- Re: [PATCH 2.6.21-rc7-mm2 2/2] sata_promise: move port reset from error intr to EH prereset
- Problems w/ Sil3124 + Port Multiplier
- From: Lars Michael Jogbäck
- Re: [git patches] libata updates
- [PATCH] libata: fix kernel-doc parameters
- Re: System freezes with kernel >2.6.19 - sata_nv [added crash info kern 2.6.21.1]
- Re: System freezes with kernel >2.6.19 - sata_nv [added crash info kern 2.6.21.1]
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [PATCH 2.6.21-rc7-mm2 2/2] sata_promise: move port reset from error intr to EH prereset
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: 2.6.20 libata cdrom
- From: Bartlomiej Zolnierkiewicz
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: flushing cache after block io
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: 2.6.20 libata cdrom
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: libata /dev/scd0 problem: mount after burn fails without eject
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- flushing cache after block io
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: 2.6.20 libata cdrom
- Re: 2.6.20 libata cdrom
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: [git patches] libata updates
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- [PATCH] libata: ignore EH scheduling during initialization
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: 2.6.20 libata cdrom
- Re: [PATCH] Fix pio/mwdma programming on ata_piix.c
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: System freezes with kernel >2.6.19 - sata_nv
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: System freezes with kernel >2.6.19 - sata_nv
- sata_nv and smartctl -o/-S trigger HSM violation (2.6.21.1, 2.6.20)
- Re: System freezes with kernel >2.6.19 - sata_nv
- Disk corruption somewhere between 2.6.20.3 and 2.6.20.6?
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- [PATCH pata-2.6] hpt366: simplify UltraDMA filtering
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: [git patches] libata updates
- Re: System freezes with kernel >2.6.19 - sata_nv
- Re: sata_via (pata): problems when write cache is disabled
- Re: [PATCH 2.6.21-rc7-mm2 2/2] sata_promise: move port reset from error intr to EH prereset
- Re: sata sil driver...
- Re: libata fails to recover from HSM violation involving DRQ status
- [PATCH] Fix pio/mwdma programming on ata_piix.c
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: libata fails to recover from HSM violation involving DRQ status
- [patch]add the ATI SB700 SATA controller device id to AHCI pci table
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: [PATCH] libata: always use polling SETXFER
- [patch] NCQ blacklist Maxtor 6B200M0/BANC1B10
- System freezes with kernel >2.6.19 - sata_nv
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- [git patches] libata updates
- Re: [PATCH 3/4] bidi support: request_io_part
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- sata_via (pata): problems when write cache is disabled
- Re: PATCH: libata: add support for ATA_16 on ATAPI
- Re: libata fails to recover from HSM violation involving DRQ status
- Fwd: Re: [RFC] pata_icside driver
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- Re: [PATCH 06/13] libata-acpi: clean up parameters and misc stuff
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: [PATCH 09/13] libata-acpi: clean up ata_acpi_exec_tfs()
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH 06/13] libata-acpi: clean up parameters and misc stuff
- Re: [PATCH 03/13] libata: separate out ata_dev_reread_id()
- Re: [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- [PATCH 2.6.21-rc7-mm2 2/2] sata_promise: move port reset from error intr to EH prereset
- [PATCH 2.6.21-rc7-mm2 1/2] sata_promise: SATAII-150/300 TX4 port numbering fix
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- PATCH: libata: add support for ATA_16 on ATAPI
- PATCH:
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- Re: libata fails to recover from HSM violation involving DRQ status
- libata fails to recover from HSM violation involving DRQ status
- Re: [patch 02/10] sata_nv: add back some verbosity into ADMA error_handler
- Re: [PATCH] libata: Handle drives that require a spin-up command before first access
- Re: [patch 02/10] sata_nv: add back some verbosity into ADMA error_handler
- Re: [PATCH 4/4] bidi support: bidirectional request
- Re: [patch 08/10] drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n
- Re: [patch 06/10] pata_hpt37x: Further small fixes
- Re: [patch 01/10] ata: printk warning fixes
- Re: [patch 07/10] pata_hpt3x2n: Add HPT371N support and other bits
- Re: [patch 02/10] sata_nv: add back some verbosity into ADMA error_handler
- Re: [PATCH 11/13] libata: reimplement ACPI invocation
- Re: [PATCH 10/13] libata-acpi: miscellaneous cleanups
- Re: [PATCH 09/13] libata-acpi: clean up ata_acpi_exec_tfs()
- Re: [PATCH 08/13] libata-acpi: implement ata_acpi_associate()
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH 06/13] libata-acpi: clean up parameters and misc stuff
- Re: [PATCH 05/13] libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/
- Re: [PATCH 03/13] libata: separate out ata_dev_reread_id()
- Re: [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- Re: [PATCH 01/13] ahci: consolidate common port flags
- Re: [PATCH] ata_timing: ensure t->cycle is always correct
- Re: [PATCH 2.6.21-rc7] sata_promise: SATAII-150/300 TX4 port numbering fix
- Re: [PATCH] libata: add missing call to ->cable_detect() in new EH path
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH] libata: Handle drives that require a spin-up command before first access
- Re: libata Intel PIIX/ICH fails to detect both PATA drives, spews ACPI errors
- sata sil driver...
- [PATCH 26/46] IDE: remove rwsem use from ide-proc core
- SATA disconnects
- From: Jan Evert van Grootheest
- sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
- Re: htpt366 PCI latency value is really high
- [PATCH] use mutex instead of semaphore in IDE driver
- [patch 10/10] ata_timing: ensure t->cycle is always correct
- [patch 07/10] pata_hpt3x2n: Add HPT371N support and other bits
- [patch 03/10] libata-acpi: add infrastructure for drivers to use _GTM/_STM methods
- [patch 04/10] pata_acpi: restore driver
- [patch 06/10] pata_hpt37x: Further small fixes
- [patch 05/10] Optional LED trigger for libata
- [patch 09/10] SPIN_LOCK_UNLOCKED cleanup in drivers/ata/pata_winbond.c
- [patch 08/10] drivers/ata/pata_cmd640.c: fix build with CONFIG_PM=n
- [patch 01/10] ata: printk warning fixes
- [patch 02/10] sata_nv: add back some verbosity into ADMA error_handler
- Re: BUG: Null pointer dereference in fs/open.c
- Re: BUG: Null pointer dereference in fs/open.c
- use_clustering (sht) bit set to 0 in AHCI ?
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: BUG: Null pointer dereference in fs/open.c
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: BUG: Null pointer dereference in fs/open.c
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: [PATCH 0/3] hotplug polling, respin
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- Re: 2.6.21-rc7-mm1 BUG at kernel/sched-clock.c:175 init_sched_clock()
- [PATCH 4/3] ahci: hotplug polling functions for vt8251 hardware variant
- Re: [PATCH 0/3] hotplug polling, respin
- Re: [PATCH 0/3] hotplug polling, respin
- Re: [PATCH 0/3] hotplug polling, respin
- [PATCH 3/3] libata: add hp-poll support to controllers without hotplug interrupts
- [PATCH 2/3] libata: add hp-poll support to controllers with hotplug interrupts
- [PATCH 1/3 take2] libata: implement hotplug by polling
- Re: [PATCH 0/3] hotplug polling, respin
- [PATCH 1/3] libata: implement hotplug by polling
- [PATCH 0/3] hotplug polling, respin
- Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: [patch 1/7] libata: check for AN support
- How to synchronize SCSI user scan with SCSI hotplug/rescan
- Re: Problem with Linux SATA driver and Acard ARC-770 Bridge chip
- Re: [patch 7/7] libata: send event when AN received
- From: Kristen Carlson Accardi
- Re: [patch 5/7] genhd: send async notification on media change
- From: Kristen Carlson Accardi
- Problem with Linux SATA driver and Acard ARC-770 Bridge chip
- Re: [patch 2/7] genhd: expose AN to user space
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- [PATCH 2/2 pata-2.6] ide: make void and rename ide_dma_timeout() method
- [PATCH 1/2 pata-2.6] ide: make void and rename ide_dma_lostirq() method
- Problems with Linux SATA driver and ARC-770 IDE Bridge chip
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 5/7] genhd: send async notification on media change
- Re: SATA timeout value
- Re: [patch 7/7] libata: send event when AN received
- Re: [patch 2/7] genhd: expose AN to user space
- Re: [patch 1/7] libata: check for AN support
- Re: [patch 1/7] libata: check for AN support
- Re: [PATCH] libata: skip FLUSH and STADNBYNOW1 during shutdown if device is already spun down
- [patch 4/7] libata: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 3/7] scsi: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 7/7] libata: send event when AN received
- From: Kristen Carlson Accardi
- [patch 6/7] SCSI: save disk in scsi_device
- From: Kristen Carlson Accardi
- [patch 5/7] genhd: send async notification on media change
- From: Kristen Carlson Accardi
- [patch 2/7] genhd: expose AN to user space
- From: Kristen Carlson Accardi
- [patch 0/7] Asynchronous Notification for ATAPI devices (v2)
- From: Kristen Carlson Accardi
- [patch 1/7] libata: check for AN support
- From: Kristen Carlson Accardi
- Re: Loud "pop" coming from hard drive on reboot
- Re: [PATCH] libata: skip FLUSH and STADNBYNOW1 during shutdown if device is already spun down
- Re: [PATCHSET] libata: improve ATA ACPI support
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6 fix queue] aec62xx: fix PIO/DMA setup issues
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] cmd64x: use interrupt status from MRDMODE register (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] cmd64x: procfs code fixes/cleanups (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] cmd64x: add/fix enablebits (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] cmd64x: interrupt status fixes (take 2)
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6] cmd64x: fix multiword and remove single-word DMA support
- From: Bartlomiej Zolnierkiewicz
- Re: SATA timeout value
- Re: [PATCHSET] libata: improve ATA ACPI support
- Re: [PATCHSET] libata: improve ATA ACPI support
- [2/3] 2.6.21-rc7: known regressions (v2)
- [git patch] IDE fix for 2.6.21-final (Revert "adjust legacy IDE resource setting (v2)")
- From: Bartlomiej Zolnierkiewicz
- [PATCH] libata: skip FLUSH and STADNBYNOW1 during shutdown if device is already spun down
- [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop
- Re: SATA timeout value
- Re: SATA timeout value
- Re: SATA timeout value
- Re: [PATCH] sl82c105: Switch to ref counting API
- [PATCH] sl82c105: Switch to ref counting API
- Re: PATCH 2.6.20 11/14; CRIS architecture update - IDE driver
- Re: libata sata_sil error handling
- [PATCH] ata_timing: ensure t->cycle is always correct
- [PATCH] pata_ali: More work
- Re: [PATCHSET] libata: improve ATA ACPI support
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: SATA timeout value
- [PATCH 2.6.21-rc7] sata_promise: SATAII-150/300 TX4 port numbering fix
- PATCH 2.6.20 11/14; CRIS architecture update - IDE driver
- Re: [PATCHSET] libata: improve ATA ACPI support
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- [PATCH pata-2.6 fix queue] aec62xx: fix PIO/DMA setup issues
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH 02/13] libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET
- Re: [PATCH 01/13] ahci: consolidate common port flags
- [PATCH 08/13] libata-acpi: implement ata_acpi_associate()
- [PATCH 06/13] libata-acpi: clean up parameters and misc stuff
- [PATCH 13/13] libata-acpi: implement _GTM/_STM support
- [PATCH 09/13] libata-acpi: clean up ata_acpi_exec_tfs()
- [PATCH 12/13] libata-acpi: remove redundant checks
- [PATCH 11/13] libata: reimplement ACPI invocation
- [PATCH 05/13] libata-acpi: s/CONFIG_SATA_ACPI/CONFIG_ATA_ACPI/
- [PATCH 10/13] libata-acpi: miscellaneous cleanups
- [PATCH 07/13] libata-acpi: add ATA_FLAG_ACPI_SATA port flag
- [PATCH 04/13] libata: during revalidation, check n_sectors after device is configured
- [PATCH 03/13] libata: separate out ata_dev_reread_id()
- [PATCHSET] libata: improve ATA ACPI support
- [PATCH 02/13] libata: separate ATA_EHI_DID_RESET into DID_SOFTRESET and DID_HARDRESET
- [PATCH 01/13] ahci: consolidate common port flags
- Re: [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH] libata: add missing call to ->cable_detect() in new EH path
- Re: [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- [PATCH] libata-acpi: fix _GTF command protocol for ATAPI devices
- [PATCH] libata: add missing call to ->cable_detect() in new EH path
- [PATCH] pata_amd: remove contamination added during cable_detect conversion
- Re: [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks
- libata sata_sil error handling
- Re: Loud "pop" coming from hard drive on reboot
- SATA timeout value
- Re: Kernel 2.6.18 and above
- Re: Loud "pop" coming from hard drive on reboot
- Re: [RFC] pata_icside driver
- Re: Loud "pop" coming from hard drive on reboot
- Re: Correct way to enable port multiplier support in kernel 2.6.20-1?
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Correct way to enable port multiplier support in kernel 2.6.20-1?
- Re: Correct way to enable port multiplier support in kernel 2.6.20-1?
- Re: Kernel 2.6.18 and above
- From: Benjamin Herrenschmidt
- Re: [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void
- Re: Kernel 2.6.18 and above
- From: Bartlomiej Zolnierkiewicz
- [git patches] IDE fixes
- From: Bartlomiej Zolnierkiewicz
- Re: [PATCH pata-2.6 fix queue] hpt366: fix kernel oops with HPT302N
- From: Bartlomiej Zolnierkiewicz
- Re: PATCH: ide/pci/delkin_cb.c add new PCI ID
- From: Bartlomiej Zolnierkiewicz
- Re: Loud "pop" coming from hard drive on reboot
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- Correct way to enable port multiplier support in kernel 2.6.20-1?
- Re: Loud "pop" coming from hard drive on reboot
- Re: Kernel 2.6.18 and above
- Re: Kernel 2.6.18 and above
- From: Benjamin Herrenschmidt
- sata_promise timeouts in 2.6.21-rc7
- Re: [PATCH] libata: Handle drives that require a spin-up command before first access
- [git patch] libata oops fix
- Re: [PATCH] pata_sis: Fix oops on boot
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
- Re: libata/SATA noprobe
- Re: Loud "pop" coming from hard drive on reboot
- [PATCH] libata: Handle drives that require a spin-up command before first access
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: sata_promise ata exceptions (2.6.20.6)
- [PATCH] pata_sis: Fix oops on boot
- Re: Loud "pop" coming from hard drive on reboot
- Re: 2.6.21-rc6-mm1 ATA HPT37x regression
- Re: 2.6.21-rc6-mm1 ATA HPT37x regression
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- From: Bartlomiej Zolnierkiewicz
- Re: Loud "pop" coming from hard drive on reboot
- From: Bartlomiej Zolnierkiewicz
- [PATCH pata-2.6 fix queue] hpt366: fix kernel oops with HPT302N
- Re: libata/SATA noprobe
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: Loud "pop" coming from hard drive on reboot
- Re: libata/SATA noprobe
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]