Hardware: ASUS M2A-VM (with the latest BIOS - 0402) AMD AM2 Seagate IDE hard drive & LG IDE DVDRW All works rather very nicely expect for the SATA :-). No luck detecting the 2 Seagate ST3250620NS SATA-II drives (Kernel.org's 2.6.21): Linux version 2.6.21 (hari@fedora7) (gcc version 4.1.2 20070424 (Red Hat 4.1.2-1 1)) #3 SMP Mon Apr 30 18:49:04 EST 2007 Command line: ro root=LABEL=/1234 rhgb quiet ... ahci 0000:00:12.0: version 2.1 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 PM: Adding info for No Bus:timer sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part ata3: SATA max UDMA/133 cmd 0xffffc2000006a100 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc2000006a180 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata5: SATA max UDMA/133 cmd 0xffffc2000006a200 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 ata6: SATA max UDMA/133 cmd 0xffffc2000006a280 ctl 0x0000000000000000 bmdma 0x00 00000000000000 irq 22 scsi2 : ahci PM: Adding info for No Bus:host2 ata3: softreset failed (1st FIS failed) ata3: softreset failed, retrying in 5 secs ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3.00: limiting speed to UDMA7:PIO5 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) scsi3 : ahci PM: Adding info for No Bus:host3 ata4: softreset failed (1st FIS failed) ata4: softreset failed, retrying in 5 secs ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata4.00: limiting speed to UDMA7:PIO5 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) (curiously irq 22 is exclusive to libata & irq count is at 0) (complete dmesg at the bottom of the email) As was suggested by many folks (http://marc.info/?l=linux-ide&w=2&r=1&s=SB600+Non-Raid-5+SATA&q=b), tried various bootup parameters to no avail: pci=nomsi acpi=noirq irqpoll acpi=off pci=nomsi irqpoll Also tried changing the BIOS SATA Controller from AHCI to IDE to RAID to no avail (all observations in this email captured while it was set was AHCI). Here's lspci -vvv: 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Unknown device 8231 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ff00 [size=8] Region 1: I/O ports at fe00 [size=4] Region 2: I/O ports at fd00 [size=8] Region 3: I/O ports at fc00 [size=4] Region 4: I/O ports at fb00 [size=16] Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] #12 [0010] Complete dmesg: Linux version 2.6.21 (hari@fedora7) (gcc version 4.1.2 20070424 (Red Hat 4.1.2-11)) #3 SMP Mon Apr 30 18:49:04 EST 2007 Command line: ro root=LABEL=/1234 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917216) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used end_pfn_map = 1179648 DMI 2.4 present. ACPI: RSDP 000F80A0, 0024 (r2 ATI ) ACPI: XSDT DFEE30C0, 0044 (r1 ATI ASUSACPI 42302E31 AWRD 0) ACPI: FACP DFEE83C0, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0) ACPI: DSDT DFEE3240, 511F (r1 ATI ASUSACPI 1000 MSFT 3000000) ACPI: FACS DFEE0000, 0040 ACPI: SSDT DFEE85C0, 02CC (r1 PTLTD POWERNOW 1 LTP 1) ACPI: MCFG DFEE8980, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0) ACPI: APIC DFEE8500, 0068 (r1 ATI ASUSACPI 42302E31 AWRD 0) Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 0000000120000000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917216) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1179648) 2 entries of 3200 used NUMA: Using 63 for the hash shift. Using node hash shift of 63 Bootmem setup node 0 0000000000000000-0000000120000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1179648 early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 917216 0: 1048576 -> 1179648 On node 0 totalpages: 1048191 DMA zone: 88 pages used for memmap DMA zone: 2218 pages reserved DMA zone: 1693 pages, LIFO batch:0 DMA32 zone: 22440 pages used for memmap DMA32 zone: 890680 pages, LIFO batch:31 Normal zone: 2816 pages used for memmap Normal zone: 128256 pages, LIFO batch:31 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Nosave address range: 00000000dfee0000 - 00000000dfee3000 Nosave address range: 00000000dfee3000 - 00000000dfef0000 Nosave address range: 00000000dfef0000 - 00000000dff00000 Nosave address range: 00000000dff00000 - 00000000e0000000 Nosave address range: 00000000e0000000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 42048 bytes of per cpu data Built 1 zonelists. Total pages: 1020629 Kernel command line: ro root=LABEL=/1234 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2800.020 MHz processor. Console: colour VGA+ 80x25 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1648 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... CPU 0: aperture @ 8000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 8000000 Memory: 4018560k/4718592k available (2303k kernel code, 174204k reserved, 1327k data, 320k init) Calibrating delay using timer specific routine.. 5602.55 BogoMIPS (lpj=2801276) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 lockdep: not fixing up alternatives. ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12500100 Detected 12.500 MHz APIC timer. lockdep: not fixing up alternatives. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5598.98 BogoMIPS (lpj=2799494) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping 03 Brought up 2 CPUs migration_cost=291 PM: Adding info for No Bus:platform NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:acpi_system:00 PM: Adding info for acpi:button_power:00 PM: Adding info for acpi:ACPI0007:00 PM: Adding info for acpi:ACPI0007:01 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:device:09 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:device:17 PM: Adding info for acpi:device:18 PM: Adding info for acpi:device:19 PM: Adding info for acpi:device:1a PM: Adding info for acpi:device:1b PM: Adding info for acpi:device:1c PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:PNP0700:00 PM: Adding info for acpi:PNP0303:00 PM: Adding info for acpi:ATK0110:00 PM: Adding info for acpi:device:1d PM: Adding info for acpi:PNP0C02:02 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:thermal:00 PM: Adding info for acpi:PNP0C0B:00 PM: Adding info for acpi:thermal:01 PM: Adding info for acpi:AWY0001:00 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:07.0 PM: Adding info for pci:0000:00:12.0 PM: Adding info for pci:0000:00:13.0 PM: Adding info for pci:0000:00:13.1 PM: Adding info for pci:0000:00:13.2 PM: Adding info for pci:0000:00:13.3 PM: Adding info for pci:0000:00:13.4 PM: Adding info for pci:0000:00:13.5 PM: Adding info for pci:0000:00:14.0 PM: Adding info for pci:0000:00:14.1 PM: Adding info for pci:0000:00:14.2 PM: Adding info for pci:0000:00:14.3 PM: Adding info for pci:0000:00:14.4 PM: Adding info for pci:0000:00:18.0 PM: Adding info for pci:0000:00:18.1 PM: Adding info for pci:0000:00:18.2 PM: Adding info for pci:0000:00:18.3 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:01:00.1 PM: Adding info for pci:0000:02:00.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 PM: Adding info for pnp:00:0a pnp: PnP ACPI: found 11 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 8000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture pnp: 00:01: ioport range 0x4100-0x411f has been reserved pnp: 00:01: ioport range 0x228-0x22f has been reserved pnp: 00:01: ioport range 0x40b-0x40b has been reserved pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:01: ioport range 0xc00-0xc01 has been reserved pnp: 00:01: ioport range 0xc14-0xc14 has been reserved pnp: 00:01: ioport range 0xc50-0xc52 has been reserved pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0a: iomem range 0xf0000-0xf3fff could not be reserved pnp: 00:0a: iomem range 0xf4000-0xf7fff could not be reserved pnp: 00:0a: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: fdc00000-fdcfffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:07.0 IO window: e000-efff MEM window: fdb00000-fdbfffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:14.4 IO window: c000-cfff MEM window: fde00000-fdefffff PREFETCH window: fdd00000-fddfffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 65536 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3034k freed PM: Adding info for No Bus:mcelog PM: Adding info for No Bus:msr0 PM: Adding info for No Bus:msr1 PM: Adding info for No Bus:cpu0 PM: Adding info for No Bus:cpu1 PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot audit: initializing netlink socket (disabled) audit(1178106805.029:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PM: Adding info for pci_express:0000:00:02.0:pcie00 Allocate Port Service[0000:00:02.0:pcie03] PM: Adding info for pci_express:0000:00:02.0:pcie03 PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PM: Adding info for pci_express:0000:00:07.0:pcie00 Allocate Port Service[0000:00:07.0:pcie03] PM: Adding info for pci_express:0000:00:07.0:pcie03 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (40 C) PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:rtc Real Time Clock Driver v1.12ac PM: Adding info for No Bus:hpet PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize PM: Adding info for No Bus:lo usbcore: registered new interface driver libusual usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 mice: PS/2 mouse device common for all mice TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ processors (version 2.00.00) powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 Freeing unused kernel memory: 320k freed Write protecting the kernel read-only data: 993k PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 input: AT Translated Set 2 keyboard as /class/input/input0 PM: Adding info for serio:serio1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 PM: Adding info for No Bus:usbdev2.1 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PM: Adding info for No Bus:usbdev3.1 ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-1: new low speed USB device using ohci_hcd and address 2 PM: Adding info for No Bus:usbdev4.1_ep81 PM: Adding info for No Bus:usbdev4.1 ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 PM: Adding info for usb:2-1 PM: Adding info for No Bus:usbdev2.2_ep00 usb 2-1: configuration #1 chosen from 1 choice PM: Adding info for usb:2-1:1.0 PM: Adding info for usb:usb5 PM: Adding info for No Bus:usbdev5.1_ep00 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-1 PM: Adding info for No Bus:usbdev2.2_ep81 PM: Adding info for usb:2-1:1.1 drivers/usb/input/hid-core.c: Fixing up Logitech S510 report descriptor input: Logitech USB Receiver as /class/input/input2 PM: Adding info for No Bus:hiddev0 input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1 PM: Adding info for No Bus:usbdev2.2_ep82 PM: Adding info for No Bus:usbdev2.2 PM: Adding info for No Bus:usbdev5.1_ep81 PM: Adding info for No Bus:usbdev5.1 ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb6 PM: Adding info for No Bus:usbdev6.1_ep00 usb usb6: configuration #1 chosen from 1 choice PM: Adding info for usb:6-0:1.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected PM: Adding info for No Bus:usbdev6.1_ep81 PM: Adding info for No Bus:usbdev6.1 SCSI subsystem initialized libata version 2.20 loaded. ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f900 irq 14 ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f908 irq 15 scsi0 : pata_atiixp PM: Adding info for No Bus:host0 usb 2-1: USB disconnect, address 2 PM: Removing info for No Bus:usbdev2.2_ep81 PM: Removing info for usb:2-1:1.0 PM: Removing info for No Bus:usbdev2.2_ep82 PM: Removing info for No Bus:hiddev0 PM: Removing info for usb:2-1:1.1 PM: Removing info for No Bus:usbdev2.2 PM: Removing info for No Bus:usbdev2.2_ep00 PM: Removing info for usb:2-1 usb 2-1: new low speed USB device using ohci_hcd and address 3 ata1.00: ATA-6: ST3120026A, 3.06, max UDMA/100 ata1.00: 234435439 sectors, multi 1: LBA48 ata1.01: ATAPI, max UDMA/33 ata1.00: configured for UDMA/100 PM: Adding info for usb:2-1 PM: Adding info for No Bus:usbdev2.3_ep00 usb 2-1: configuration #1 chosen from 1 choice PM: Adding info for usb:2-1:1.0 input: Logitech USB Receiver as /class/input/input3 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-1 PM: Adding info for No Bus:usbdev2.3_ep81 PM: Adding info for usb:2-1:1.1 drivers/usb/input/hid-core.c: Fixing up Logitech S510 report descriptor input: Logitech USB Receiver as /class/input/input4 PM: Adding info for No Bus:hiddev0 input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-1 PM: Adding info for No Bus:usbdev2.3_ep82 PM: Adding info for No Bus:usbdev2.3 ata1.01: configured for UDMA/33 scsi1 : pata_atiixp PM: Adding info for No Bus:host1 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA ST3120026A 3.06 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 SCSI device sda: 234435439 512-byte hdwr sectors (120031 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 234435439 512-byte hdwr sectors (120031 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > sd 0:0:0:0: Attached scsi disk sda PM: Adding info for No Bus:target0:0:1 scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B A102 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:1:0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1178106810.695:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1801 types, 76 bools, 1 sens, 1024 cats security: 60 classes, 65047 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1178106810.987:3): policy loaded auid=4294967295 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Attached scsi generic sg1 type 5 input: PC Speaker as /class/input/input5 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PM: Adding info for platform:floppy.0 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of 00:03 failed with error -16 ahci 0000:00:12.0: version 2.1 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 PM: Adding info for No Bus:timer sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:1:0: Attached scsi CD-ROM sr0 PM: Adding info for No Bus:seq PM: Adding info for No Bus:sequencer PM: Adding info for No Bus:sequencer2 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part ata3: SATA max UDMA/133 cmd 0xffffc2000006a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc2000006a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata5: SATA max UDMA/133 cmd 0xffffc2000006a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 ata6: SATA max UDMA/133 cmd 0xffffc2000006a280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22 scsi2 : ahci PM: Adding info for No Bus:host2 ata3: softreset failed (1st FIS failed) ata3: softreset failed, retrying in 5 secs ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3.00: limiting speed to UDMA7:PIO5 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) scsi3 : ahci PM: Adding info for No Bus:host3 ata4: softreset failed (1st FIS failed) ata4: softreset failed, retrying in 5 secs ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata4.00: limiting speed to UDMA7:PIO5 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts PM: Adding info for No Bus:kvm loop: loaded (max 8 devices) SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.25.0 20060524 on minor 0 No dock devices found. input: Power Button (FF) as /class/input/input6 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input7 ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found PM: Adding info for No Bus:device-mapper device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda12, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda12, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda14, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda14, type ext3), uses xattr audit(1178107008.787:4): avc: denied { read } for pid=1381 comm="mount" name="ubuntu-7.04-dvd-i386.iso" dev=sda12 ino=1896840 scontext=system_u:system_r:mount_t:s0 tcontext=user_u:object_r:public_content_t:s0 tclass=file Adding 1052216k swap on /dev/sda9. Priority:-1 extents:1 across:1052216k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 ata4.00: qc timeout (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104) audit(1178107014.226:5): audit_pid=1685 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) scsi4 : ahci PM: Adding info for No Bus:host4 ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci PM: Adding info for No Bus:host5 ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... PM: Adding info for No Bus:pcmC0D2c PM: Adding info for No Bus:pcmC0D1p PM: Adding info for No Bus:adsp PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:02:00.0 to 64 PM: Adding info for No Bus:eth0 eth0: RTL8168b/8111b at 0xffffc20010104000, 00:1a:92:6f:e9:d5, IRQ 19 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 r8169: eth0: link down r8169: eth0: link down r8169: eth0: link up SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bridge firewalling registered PM: Adding info for No Bus:vnet0 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda8, type ext3), uses xattr I see Linus's post 2.6.21 git tree has been updated with many SATA updates, not sure whether it'd help. (Incidentally, while 2.6.20 is fine, starting 2.6.21, enabling hpet leads to a solid hang. Having got round to reporting it to LKML. Will do that later on. Perhaps an indication AMD690G chipset, ASUS AM2-VM or BIOS or all of them are badly broken??) Thanks Hari Send instant messages to your online friends http://au.messenger.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
