On Wed, 25 Apr 2007, Andrew Morton wrote:
On Wed, 25 Apr 2007 22:53:00 +0000 (GMT) William Heimbigner <icxcnika@xxxxxxxxxx> wrote:
On Wed, 25 Apr 2007, Andrew Morton wrote:
<snip>
OK. I am able to use the pktcdvd driver OK in mainline with a piix/sata
drive. It could be that something is going wrong at the IDE level for you.
Perhaps; I'll try an external usb cd burner, and see where that goes.
Are you able to identify the most recent kernel which actually worked?
No, because I haven't set packet writing up in Linux before - however, I do know
that I've successfully set up packet writing (using 2 of the 3 cd burners I
have) in another operating system before. I'll try 2.6.18 and see if that gets
me anywhere different, though.
OK.
A quick summary: mainline's pktcdvd isn't working for William using IDE.
It is working for me using sata.
<snip>
So what has happened here is that this code, in ide-cd.c's
cdrom_decode_status() is now triggering:
} else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
/* All other functions, except for READ. */
unsigned long flags;
/*
* if we have an error, pass back CHECK_CONDITION as the
* scsi status byte
*/
if (blk_pc_request(rq) && !rq->errors)
rq->errors = SAM_STAT_CHECK_CONDITION;
I suspect this is a bug introduced by
406c9b605cbc45151c03ac9a3f95e9acf050808c (in which case it'll be the third
bug so far).
Perhaps the IDE driver was previously not considering these requests to be
of type blk_pc_request(), and after
406c9b605cbc45151c03ac9a3f95e9acf050808c it _is_ treating them as
blk_pc_request() and is incorrectly reporting an error. Or something like
that.
Guys: help!
A follow-up: after looking around a bit, I have managed to get packet writing to
work properly on /dev/hdc (before, it was reporting only 1.8 MB available or so;
this was a formatting issue).
I've also gotten the external cd-rw drive to work. However, I'm still at a loss
as to why /dev/hdd won't work. I tried formatting a dvd-rw for this drive,
however, it consistently gives me:
[27342.503933] drivers/ide/ide-cd.c:729: setting error to 2
[27342.509251] [<c010521a>] show_trace_log_lvl+0x1a/0x30
[27342.514411] [<c0105952>] show_trace+0x12/0x20
[27342.518864] [<c0105a46>] dump_stack+0x16/0x20
[27342.523317] [<c033f6e4>] cdrom_decode_status+0x1f4/0x3b0
[27342.528732] [<c033fae8>] cdrom_newpc_intr+0x38/0x320
[27342.533791] [<c0331106>] ide_intr+0x96/0x200
[27342.538157] [<c0150cf8>] handle_IRQ_event+0x28/0x60
[27342.543139] [<c0151f96>] handle_edge_irq+0xa6/0x130
[27342.548121] [<c0106449>] do_IRQ+0x49/0xa0
[27342.552228] [<c0104c3a>] common_interrupt+0x2e/0x34
[27342.557200] [<c01022d2>] mwait_idle+0x12/0x20
[27342.561653] [<c01023ca>] cpu_idle+0x4a/0x80
[27342.565934] [<c0101147>] rest_init+0x37/0x40
[27342.570300] [<c068ac7b>] start_kernel+0x34b/0x420
[27342.575109] [<00000000>] 0x0
[27342.578089] =======================
and doesn't work (the above output was generated by Andrew's patch to log
certain areas).
# dvd+rw-format /dev/hdd -force
* BD/DVDRW/-RAM format utility by <appro@xxxxxxxxxxxxxx>, version 7.0.
:-( failed to locate "Quick Format" descriptor.
* 4.7GB DVD-RW media in Sequential mode detected.
* formatting 0.0\:-[ READ TRACK INFORMATION failed with SK=3h/ASC=11h/ACQ=05h]: Input/output error
I tried putting in a different dvd-rw, and this time I get:
# dvd+rw-format /dev/hdd -force
* BD/DVDRW/-RAM format utility by <appro@xxxxxxxxxxxxxx>, version 7.0.
* 4.7GB DVD-RW media in Sequential mode detected.
* formatting 0.0|:-[ FORMAT UNIT failed with SK=5h/ASC=26h/ACQ=00h]: Input/output error
William Heimbigner
icxcnika@xxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
