Jiri Slaby napsal(a):
> Cc: Mikael Pettersson <mikpe@xxxxxxxx>
> Cc: linux-ide@xxxxxxxxxxxxxxx
> Cc: Jeff Garzik <jgarzik@xxxxxxxxx>
>
> Jiri Slaby napsal(a):
>> Cc: stable@xxxxxxxxxx
>>
>> Jiri Slaby napsal(a):
>>> Hi,
>>>
>>> I have a problem with higher disk loads (e.g. running git-log or yum update).
>>> Many processes end up in D state and system is unusable -- I'm not able to run
>>> anything but smooth mouse moving when this happens.
>>>
>>> If I wait for a 20-30sec it becomes usable. This happens in 2.6.21-rc7-mm2 and
>>> also in 2007-04-28-05-06 broken-out snapshot. I think 2.6.21-rc6-mm1 worked
>>> fine, but I'm uncertain. If it is important, let me know to re-test.
>>>
>>> sysrq-t:
>>>
>>> yum D 0000004C 0 2976 2955 (NOTLB)
>>> c455bd00 00200082 8c68ea9e 0000004c 00000000 00000000 c455bcdc c455bc9c
>>> c455bc9c c2d6a580 8c68ea9e 0000004c c455bcc0 c2d6a694 c1809980 00000000
>>> c455bcd0 c4640c80 000036a0 00000001 c455bcf0 c02a7132 c3682164 00001cde
>>> Call Trace:
>>> [<c037834c>] io_schedule+0x21/0x2e
>>> [<c014d505>] sync_page+0x38/0x43
>>> [<c0378581>] __wait_on_bit_lock+0x40/0x63
>>> [<c014d4b6>] __lock_page+0x54/0x5c
>>> [<c014da81>] do_generic_mapping_read+0x1dc/0x57e
>>> [<c014fc84>] generic_file_aio_read+0xc9/0x1b5
>>> [<c016c31c>] do_sync_read+0xd0/0x106
>>> [<c016cada>] vfs_read+0x89/0x11d
>>> [<c016d02c>] sys_pread64+0x64/0x68
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<47176012>] 0x47176012
>>> =======================
>>> xterm S 00000051 0 2980 1 (NOTLB)
>>> c4678ae0 00000082 b2fbf0ce 00000051 00000000 00000000 00000000 00000000
>>> c4678b30 c469d540 b2fbf0ce 00000051 c4678ab0 c469d654 c1813980 00000001
>>> c4678ad0 c47f0e40 c4678b00 00000286 c4678ae0 c012c077 00000001 00003286
>>> Call Trace:
>>> [<c03784ad>] schedule_timeout+0x44/0xa4
>>> [<c0177ee3>] do_select+0x46d/0x55b
>>> [<c017816f>] core_sys_select+0x19e/0x2c0
>>> [<c01786f3>] sys_select+0xd3/0x18d
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<47180f98>] 0x47180f98
>>> =======================
>>> bash S 0000004A 0 2982 2980 (NOTLB)
>>> c50b3e80 00000086 ccf4cc7e 0000004a 00000000 c021bed9 00000000 c45c0030
>>> c50b3e30 c45c0030 ccf4cc7e 0000004a c50b3e50 c45c0144 c1809980 00000000
>>> c1809e44 c4517900 00000000 000000b3 c50b3e90 c014f841 c477cb40 c2d79000
>>> Call Trace:
>>> [<c03784d3>] schedule_timeout+0x6a/0xa4
>>> [<c0221960>] read_chan+0x1b9/0x5b9
>>> [<c021e48f>] tty_read+0x75/0xaa
>>> [<c016cada>] vfs_read+0x89/0x11d
>>> [<c016cf3d>] sys_read+0x3d/0x64
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<4717883e>] 0x4717883e
>>> =======================
>>> metacity S 00000050 0 3005 2429 (NOTLB)
>>> c2fd5bb0 00000086 5205656d 00000050 00000000 00000000 00000000 c441c51c
>>> 00000246 c45c0540 5205656d 00000050 c2fd5b80 c45c0654 c1809980 00000000
>>> c1813e44 c27f4900 00002cb8 00000246 c2fd5ba0 c0135a80 c2fd5ba8 00002cb2
>>> Call Trace:
>>> [<c03784d3>] schedule_timeout+0x6a/0xa4
>>> [<c0177905>] do_sys_poll+0x33f/0x46d
>>> [<c0177a74>] sys_poll+0x41/0x43
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<4717e3a6>] 0x4717e3a6
>>> =======================
>>> ccpd D 0000004C 0 3009 2010 (NOTLB)
>>> c50abbb0 00000082 f08ef585 0000004c 00000000 00000000 c180abc0 c22fc788
>>> c50abba0 c505d070 f08ef585 0000004c 00000000 c505d184 c1809980 00000000
>>> c21167f0 c2fc6740 c5794e3c c31eff74 c5794310 c22fc788 00000002 00001e64
>>> Call Trace:
>>> [<c01b64d9>] do_get_write_access+0x310/0x4f5
>>> [<c01b66d9>] journal_get_write_access+0x1b/0x2a
>>> [<c01b59ce>] __ext3_journal_get_write_access+0x19/0x3f
>>> [<c01aa5f6>] ext3_reserve_inode_write+0x53/0x6c
>>> [<c01aa62f>] ext3_mark_inode_dirty+0x20/0x37
>>> [<c01ad350>] ext3_dirty_inode+0x6b/0x6d
>>> [<c01868fb>] __mark_inode_dirty+0x2a/0x16d
>>> [<c017eacc>] touch_atime+0x84/0xd8
>>> [<c014dd08>] do_generic_mapping_read+0x463/0x57e
>>> [<c014fc84>] generic_file_aio_read+0xc9/0x1b5
>>> [<c016c31c>] do_sync_read+0xd0/0x106
>>> [<c016cada>] vfs_read+0x89/0x11d
>>> [<c016fc6e>] kernel_read+0x36/0x48
>>> [<c016fd32>] prepare_binprm+0xb2/0xdf
>>> [<c0171322>] do_execve+0xe6/0x1e1
>>> [<c0102715>] sys_execve+0x2e/0x7f
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<471474da>] 0x471474da
>>> =======================
>>> bash D 0000004D 0 3011 2859 (NOTLB)
>>> c471dc90 00000082 08f8373c 0000004d 00000000 00000000 c471dc30 c471dc2c
>>> c471dc2c c4670540 08f8373c 0000004d c471dc50 c4670654 c1809980 00000000
>>> c471dc60 c2f3f040 00000005 00000001 c471dc80 c02a7132 c591af64 00001eea
>>> Call Trace:
>>> [<c037834c>] io_schedule+0x21/0x2e
>>> [<c014d505>] sync_page+0x38/0x43
>>> [<c0378581>] __wait_on_bit_lock+0x40/0x63
>>> [<c014d4b6>] __lock_page+0x54/0x5c
>>> [<c014da81>] do_generic_mapping_read+0x1dc/0x57e
>>> [<c014fc84>] generic_file_aio_read+0xc9/0x1b5
>>> [<c016c31c>] do_sync_read+0xd0/0x106
>>> [<c016cada>] vfs_read+0x89/0x11d
>>> [<c016fc6e>] kernel_read+0x36/0x48
>>> [<c016fd32>] prepare_binprm+0xb2/0xdf
>>> [<c0171322>] do_execve+0xe6/0x1e1
>>> [<c0102715>] sys_execve+0x2e/0x7f
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<471474da>] 0x471474da
>>> =======================
>>> bash D 0000004D 0 3012 2884 (NOTLB)
>>> c50d5a80 00000082 a21bfc35 0000004d 00000000 00000000 c180abc0 c2033dd4
>>> c50d5a70 c2f4f070 a21bfc35 0000004d 00000000 c2f4f184 c1809980 00000000
>>> c21167bc c47f0c80 c2033310 c22fc788 c5794e3c c2033dd4 00000002 0000216d
>>> Call Trace:
>>> [<c01b64d9>] do_get_write_access+0x310/0x4f5
>>> [<c01b66d9>] journal_get_write_access+0x1b/0x2a
>>> [<c01b59ce>] __ext3_journal_get_write_access+0x19/0x3f
>>> [<c01aa5f6>] ext3_reserve_inode_write+0x53/0x6c
>>> [<c01aa62f>] ext3_mark_inode_dirty+0x20/0x37
>>> [<c01ad350>] ext3_dirty_inode+0x6b/0x6d
>>> [<c01868fb>] __mark_inode_dirty+0x2a/0x16d
>>> [<c017eacc>] touch_atime+0x84/0xd8
>>> [<c017499a>] __link_path_walk+0x893/0xca4
>>> [<c0174df1>] link_path_walk+0x46/0xc3
>>> [<c0175038>] do_path_lookup+0x86/0x1b0
>>> [<c0175ad0>] __path_lookup_intent_open+0x44/0x7f
>>> [<c0175b83>] path_lookup_open+0x21/0x27
>>> [<c016fd86>] open_exec+0x27/0xa2
>>> [<c01993a3>] load_elf_binary+0x1482/0x1acf
>>> [<c016fa1d>] search_binary_handler+0x6e/0x19f
>>> [<c0171386>] do_execve+0x14a/0x1e1
>>> [<c0102715>] sys_execve+0x2e/0x7f
>>> [<c0103ffc>] syscall_call+0x7/0xb
>>> [<471474da>] 0x471474da
>>> =======================
>>>
>>> Note that yum works on lvm on raid0 and git too, but on the another md volume.
>>> Both ext3s. Drivers are sata_promise and ata_piix (sata disk); CFQ scheduler.
>>> Using noop is no change (but seems to be harder to reproduce with it). I figured
>>> out that it probably happens when 2+ processes are on both "processors" (HT on
>>> P4) and are IO wait (multiload-applet shows red above the half).
>>>
>>> Swap usage is 0 all the time.
>> I'm able to reproduce this in the latest git (dc87c3985e9b442c). Going to bisect.
>
> Is it possible, that
> Commit: 176efb054422bffe6b5a34194ffad134366c7f7e
> Author: Mikael Pettersson <mikpe@xxxxxxxx> Wed, 14 Mar 2007 09:51:35 +0100
>
> sata_promise: decode and report error reasons
>
> This patch adds much needed error reason decoding and
> reporting to sata_promise. It's simplistic but should
> log all relevant error info the controller provides.
>
> Signed-off-by: Mikael Pettersson <mikpe@xxxxxxxx>
> Signed-off-by: Jeff Garzik <jeff@xxxxxxxxxx>
>
> causes this? When I change this:
> diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
> index f56549b..a0024ae 100644
> --- a/drivers/ata/sata_promise.c
> +++ b/drivers/ata/sata_promise.c
> @@ -668,10 +668,8 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap,
> else
> err_mask &= ~PDC2_ERR_MASK;
> port_status = readl(port_mmio + PDC_GLOBAL_CTL);
> - if (unlikely(port_status & err_mask)) {
> + if (unlikely(port_status & err_mask))
> pdc_error_intr(ap, qc, port_status, err_mask);
> - return 1;
> - }
>
> switch (qc->tf.protocol) {
> case ATA_PROT_DMA:
> the problem disappears.
Actually changes:
ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata6.00: (port_status 0x20080000)
ata6.00: cmd c8/00:08:03:d3:61/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x6 (timeout)
ata6: soft resetting port
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
ata6.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
ata6.00: configured for UDMA/133
ata6: EH complete
sd 5:0:0:0: [sdc] 156301488 512-byte hardware sectors (80026 MB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
to
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata5.00: (port_status 0x20080000)
ata5.00: cmd c8/00:08:bf:cd:4b/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 50/00:00:c6:cd:4b/00:00:00:00:00/e0 Emask 0x2 (HSM violation)
ata5: soft resetting port
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
ata5.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
ata5.00: configured for UDMA/133
ata5: EH complete
sd 4:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
I.e. no freezing of ports...
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
