Re: Problems with Linux SATA driver and ARC-770 IDE Bridge chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Craig Metz wrote:
> In message <010501c78736$aad2e480$0703a8c0@SJAWINXP>, you write:
>>> Here are the Linux Kernel error messages that are produced by this
>>> kernel running on a Intel D865GLC motherboard trying to talk to our
>>> ARC-770 based adaptor on SATA-0 :
>>>
>>> ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 10 
>>> scsi2 : ata_piix ata1.00: CFA, max PIO4, 8005536 sectors: LBA 
>>> ata1.00: ata1: dev 0 multi count 0 ata1.00: qc timeout (cmd 0xef) 
>>> ata1.00: failed to set xfermode (err_mask=0x4)
>> Can you give a shot at 2.6.21-rc7.  The problem should have been fixed
>> there.
> 
>   I am also having problems with this device, but on both an ICH5 and on a
> VIA pre-AHCI SATA controller. I just tried 2.6.21-rc7 - it fails in exactly the
> same way as with 2.6.20.

Can you please post full dmesg?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux