Reimplement suspend/resume support using sdev->manage_start_stop. * Device suspend/resume is now SCSI layer's responsibility and the code is simplified a lot. * DPM is dropped. This also simplifies code a lot. Suspend/resume status is port-wide now. * ata_scsi_device_suspend/resume() and ata_dev_ready() removed. * Resume now has to wait for disk to spin up before proceeding. I couldn't find easy way out as libata is in EH waiting for the disk to be ready and sd is waiting for EH to complete to issue START_STOP. * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config(). This fixes spindown on shutdown and suspend-to-disk. Signed-off-by: Tejun Heo <htejun@xxxxxxxxx> --- This and the following patch should fix all the spindown problems both on shutdown and STD. These patches are against v2.6.21-rc7 + updates from scsi-misc-2.6. The git tree is available at the following URL. http://htj.dyndns.org/git/?p=libata-tj.git;a=shortlog;h=spindown git://htj.dyndns.org/libata-tj spindown I'll post combined patch against 2.6.21-rc7 as a reply to this thread. Please test the combined patch and verify it works. Thanks. drivers/ata/ahci.c | 4 - drivers/ata/ata_generic.c | 6 +- drivers/ata/ata_piix.c | 4 - drivers/ata/libata-core.c | 39 +------ drivers/ata/libata-eh.c | 237 +-------------------------------------- drivers/ata/libata-scsi.c | 129 +--------------------- drivers/ata/pata_ali.c | 4 - drivers/ata/pata_amd.c | 4 - drivers/ata/pata_atiixp.c | 4 - drivers/ata/pata_cmd640.c | 2 - drivers/ata/pata_cmd64x.c | 4 - drivers/ata/pata_cs5520.c | 4 - drivers/ata/pata_cs5530.c | 4 - drivers/ata/pata_cs5535.c | 4 - drivers/ata/pata_cypress.c | 4 - drivers/ata/pata_efar.c | 4 - drivers/ata/pata_hpt366.c | 4 - drivers/ata/pata_hpt3x3.c | 4 - drivers/ata/pata_it8213.c | 4 - drivers/ata/pata_it821x.c | 4 - drivers/ata/pata_ixp4xx_cf.c | 2 +- drivers/ata/pata_jmicron.c | 4 - drivers/ata/pata_marvell.c | 4 - drivers/ata/pata_mpc52xx.c | 4 - drivers/ata/pata_mpiix.c | 4 - drivers/ata/pata_netcell.c | 4 - drivers/ata/pata_ns87410.c | 4 - drivers/ata/pata_oldpiix.c | 4 - drivers/ata/pata_opti.c | 4 - drivers/ata/pata_optidma.c | 4 - drivers/ata/pata_pdc202xx_old.c | 4 - drivers/ata/pata_radisys.c | 4 - drivers/ata/pata_rz1000.c | 6 +- drivers/ata/pata_sc1200.c | 4 - drivers/ata/pata_scc.c | 4 - drivers/ata/pata_serverworks.c | 4 - drivers/ata/pata_sil680.c | 4 - drivers/ata/pata_sis.c | 4 - drivers/ata/pata_triflex.c | 4 - drivers/ata/pata_via.c | 4 - drivers/ata/sata_inic162x.c | 4 - drivers/ata/sata_nv.c | 8 -- drivers/ata/sata_sil.c | 4 - drivers/ata/sata_sil24.c | 4 - include/linux/libata.h | 14 +-- 45 files changed, 14 insertions(+), 573 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7c61bc7..72c286e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -246,10 +246,6 @@ static struct scsi_host_template ahci_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations ahci_ops = { diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 92a491d..0f19e32 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -54,7 +54,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->dma_mode = XFER_MW_DMA_0; @@ -90,10 +90,6 @@ static struct scsi_host_template generic_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations generic_port_ops = { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 55d306a..8421742 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -275,10 +275,6 @@ static struct scsi_host_template piix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations piix_pata_ops = { diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6d0a946..1c00526 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2823,7 +2823,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) dev = &ap->device[i]; /* don't update suspended devices' xfer mode */ - if (!ata_dev_ready(dev)) + if (!ata_dev_enabled(dev)) continue; rc = ata_dev_set_mode(dev); @@ -5758,37 +5758,11 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, */ int ata_host_suspend(struct ata_host *host, pm_message_t mesg) { - int i, j, rc; + int rc; rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1); - if (rc) - goto fail; - - /* EH is quiescent now. Fail if we have any ready device. - * This happens if hotplug occurs between completion of device - * suspension and here. - */ - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - for (j = 0; j < ATA_MAX_DEVICES; j++) { - struct ata_device *dev = &ap->device[j]; - - if (ata_dev_ready(dev)) { - ata_port_printk(ap, KERN_WARNING, - "suspend failed, device %d " - "still active\n", dev->devno); - rc = -EBUSY; - goto fail; - } - } - } - - host->dev->power.power_state = mesg; - return 0; - - fail: - ata_host_resume(host); + if (rc == 0) + host->dev->power.power_state = mesg; return rc; } @@ -6801,11 +6775,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ -#ifdef CONFIG_PM -EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); -EXPORT_SYMBOL_GPL(ata_scsi_device_resume); -#endif /* CONFIG_PM */ - EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_port_abort); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 0dbee55..59d0fb5 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -55,29 +55,12 @@ static void ata_eh_finish(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); static void ata_eh_handle_port_resume(struct ata_port *ap); -static int ata_eh_suspend(struct ata_port *ap, - struct ata_device **r_failed_dev); -static void ata_eh_prep_resume(struct ata_port *ap); -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev); #else /* CONFIG_PM */ static void ata_eh_handle_port_suspend(struct ata_port *ap) { } static void ata_eh_handle_port_resume(struct ata_port *ap) { } - -static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - return 0; -} - -static void ata_eh_prep_resume(struct ata_port *ap) -{ } - -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - return 0; -} #endif /* CONFIG_PM */ static void ata_ering_record(struct ata_ering *ering, int is_io, @@ -1764,7 +1747,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, if (ehc->i.flags & ATA_EHI_DID_RESET) readid_flags |= ATA_READID_POSTRESET; - if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { + if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) { if (ata_port_offline(ap)) { rc = -EIO; goto err; @@ -1841,166 +1824,6 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, return rc; } -#ifdef CONFIG_PM -/** - * ata_eh_suspend - handle suspend EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle suspend EH action. Disk devices are spinned down and - * other types of devices are just marked suspended. Once - * suspended, no EH action to the device is allowed until it is - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned long flags; - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) - continue; - - WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); - - ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - /* flush cache */ - rc = ata_flush_cache(dev); - if (rc) - break; - - /* spin down */ - err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin down (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - spin_lock_irqsave(ap->lock, flags); - dev->flags |= ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - - ata_eh_done(ap, dev, ATA_EH_SUSPEND); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return rc; -} - -/** - * ata_eh_prep_resume - prep for resume EH action - * @ap: target host port - * - * Clear SUSPENDED in preparation for scheduled resume actions. - * This allows other parts of EH to access the devices being - * resumed. - * - * LOCKING: - * Kernel thread context (may sleep). - */ -static void ata_eh_prep_resume(struct ata_port *ap) -{ - struct ata_device *dev; - unsigned long flags; - int i; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - spin_lock_irqsave(ap->lock, flags); - dev->flags &= ~ATA_DFLAG_SUSPENDED; - spin_unlock_irqrestore(ap->lock, flags); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_eh_resume - handle resume EH action - * @ap: target host port - * @r_failed_dev: result parameter to indicate failing device - * - * Handle resume EH action. Target devices are already reset and - * revalidated. Spinning up is the only operation left. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise - */ -static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) -{ - struct ata_device *dev; - int i, rc = 0; - - DPRINTK("ENTER\n"); - - for (i = 0; i < ATA_MAX_DEVICES; i++) { - unsigned int action, err_mask; - - dev = &ap->device[i]; - action = ata_eh_dev_action(dev); - - if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) - continue; - - ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); - - if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { - err_mask = ata_do_simple_cmd(dev, - ATA_CMD_IDLEIMMEDIATE); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to " - "spin up (err_mask=0x%x)\n", - err_mask); - rc = -EIO; - break; - } - } - - ata_eh_done(ap, dev, ATA_EH_RESUME); - } - - if (rc) - *r_failed_dev = dev; - - DPRINTK("EXIT\n"); - return 0; -} -#endif /* CONFIG_PM */ - static int ata_port_nr_enabled(struct ata_port *ap) { int i, cnt = 0; @@ -2026,17 +1849,6 @@ static int ata_eh_skip_recovery(struct ata_port *ap) struct ata_eh_context *ehc = &ap->eh_context; int i; - /* skip if all possible devices are suspended */ - for (i = 0; i < ata_port_max_devices(ap); i++) { - struct ata_device *dev = &ap->device[i]; - - if (!(dev->flags & ATA_DFLAG_SUSPENDED)) - break; - } - - if (i == ata_port_max_devices(ap)) - return 1; - /* thaw frozen port, resume link and recover failed devices */ if ((ap->pflags & ATA_PFLAG_FROZEN) || (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap)) @@ -2116,9 +1928,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; - /* prep for resume */ - ata_eh_prep_resume(ap); - /* skip EH if possible. */ if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; @@ -2146,11 +1955,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (rc) goto dev_fail; - /* resume devices */ - rc = ata_eh_resume(ap, &dev); - if (rc) - goto dev_fail; - /* configure transfer mode if necessary */ if (ehc->i.flags & ATA_EHI_SETMODE) { rc = ata_set_mode(ap, &dev); @@ -2159,11 +1963,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, ehc->i.flags &= ~ATA_EHI_SETMODE; } - /* suspend devices */ - rc = ata_eh_suspend(ap, &dev); - if (rc) - goto dev_fail; - goto out; dev_fail: @@ -2359,22 +2158,13 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) * * Resume @ap. * - * This function also waits upto one second until all devices - * hanging off this port requests resume EH action. This is to - * prevent invoking EH and thus reset multiple times on resume. - * - * On DPM resume, where some of devices might not be resumed - * together, this may delay port resume upto one second, but such - * DPM resumes are rare and 1 sec delay isn't too bad. - * * LOCKING: * Kernel thread context (may sleep). */ static void ata_eh_handle_port_resume(struct ata_port *ap) { - unsigned long timeout; unsigned long flags; - int i, rc = 0; + int rc = 0; /* are we resuming? */ spin_lock_irqsave(ap->lock, flags); @@ -2385,31 +2175,12 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) } spin_unlock_irqrestore(ap->lock, flags); - /* spurious? */ - if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) - goto done; + WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); if (ap->ops->port_resume) rc = ap->ops->port_resume(ap); - /* give devices time to request EH */ - timeout = jiffies + HZ; /* 1s max */ - while (1) { - for (i = 0; i < ATA_MAX_DEVICES; i++) { - struct ata_device *dev = &ap->device[i]; - unsigned int action = ata_eh_dev_action(dev); - - if ((dev->flags & ATA_DFLAG_SUSPENDED) && - !(action & ATA_EH_RESUME)) - break; - } - - if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) - break; - msleep(10); - } - - done: + /* report result */ spin_lock_irqsave(ap->lock, flags); ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); if (ap->pm_result) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 9afba2b..8f80019 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -510,133 +510,6 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf) } } -#ifdef CONFIG_PM -/** - * ata_scsi_device_suspend - suspend ATA device associated with sdev - * @sdev: the SCSI device to suspend - * @mesg: target power management message - * - * Request suspend EH action on the ATA device associated with - * @sdev and wait for the operation to complete. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - unsigned long flags; - unsigned int action; - int rc = 0; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* wait for the previous resume to complete */ - while (dev->flags & ATA_DFLAG_SUSPENDED) { - spin_unlock_irqrestore(ap->lock, flags); - ata_port_wait_eh(ap); - spin_lock_irqsave(ap->lock, flags); - } - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request suspend */ - action = ATA_EH_SUSPEND; - if (mesg.event != PM_EVENT_SUSPEND) - action |= ATA_EH_PM_FREEZE; - ap->eh_info.dev_action[dev->devno] |= action; - ap->eh_info.flags |= ATA_EHI_QUIET; - ata_port_schedule_eh(ap); - - spin_unlock_irqrestore(ap->lock, flags); - - /* wait for EH to do the job */ - ata_port_wait_eh(ap); - - spin_lock_irqsave(ap->lock, flags); - - /* If @sdev is still attached but the associated ATA device - * isn't suspended, the operation failed. - */ - if (sdev->sdev_state != SDEV_OFFLINE && - sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && - !(dev->flags & ATA_DFLAG_SUSPENDED)) - rc = -EIO; - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - if (rc == 0) - sdev->sdev_gendev.power.power_state = mesg; - return rc; -} - -/** - * ata_scsi_device_resume - resume ATA device associated with sdev - * @sdev: the SCSI device to resume - * - * Request resume EH action on the ATA device associated with - * @sdev and return immediately. This enables parallel - * wakeup/spinup of devices. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * 0. - */ -int ata_scsi_device_resume(struct scsi_device *sdev) -{ - struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = ata_scsi_find_dev(ap, sdev); - struct ata_eh_info *ehi = &ap->eh_info; - unsigned long flags; - unsigned int action; - - if (!dev) - goto out; - - spin_lock_irqsave(ap->lock, flags); - - /* if @sdev is already detached, nothing to do */ - if (sdev->sdev_state == SDEV_OFFLINE || - sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) - goto out_unlock; - - /* request resume */ - action = ATA_EH_RESUME; - if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) - __ata_ehi_hotplugged(ehi); - else - action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; - ehi->dev_action[dev->devno] |= action; - - /* We don't want autopsy and verbose EH messages. Disable - * those if we're the only device on this link. - */ - if (ata_port_max_devices(ap) == 1) - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - - ata_port_schedule_eh(ap); - - out_unlock: - spin_unlock_irqrestore(ap->lock, flags); - out: - sdev->sdev_gendev.power.power_state = PMSG_ON; - return 0; -} -#endif /* CONFIG_PM */ - /** * ata_to_sense_error - convert ATA error to SCSI error * @id: ATA device number @@ -929,6 +802,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev) blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); + sdev->manage_start_stop = 1; + if (dev) ata_scsi_dev_config(sdev, dev); diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index d40edeb..48c7531 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -291,10 +291,6 @@ static struct scsi_host_template ali_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; /* diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 5a77e4e..2bf9ade 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -323,10 +323,6 @@ static struct scsi_host_template amd_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations amd33_port_ops = { diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 39c871a..b4048f0 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -229,10 +229,6 @@ static struct scsi_host_template atiixp_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations atiixp_port_ops = { diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index ab9468d..c876d77 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -181,8 +181,6 @@ static struct scsi_host_template cmd640_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, }; static struct ata_port_operations cmd640_port_ops = { diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 3989cc5..3e02c6a 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -266,10 +266,6 @@ static struct scsi_host_template cmd64x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cmd64x_port_ops = { diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 79bef0d..83bcc5b 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -155,10 +155,6 @@ static struct scsi_host_template cs5520_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5520_port_ops = { diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 29642d5..637d8b3 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5530_port_ops = { diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 08cccc9..54586ac 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -172,10 +172,6 @@ static struct scsi_host_template cs5535_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cs5535_port_ops = { diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 6ec049c..30e5c54 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -125,10 +125,6 @@ static struct scsi_host_template cy82c693_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations cy82c693_port_ops = { diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index a321685..38411f2 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -246,10 +246,6 @@ static struct scsi_host_template efar_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations efar_ops = { diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 93cfa6d..c412a9a 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -331,10 +331,6 @@ static struct scsi_host_template hpt36x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; /* diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index ac28ec8..84c636b 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -100,10 +100,6 @@ static struct scsi_host_template hpt3x3_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations hpt3x3_port_ops = { diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 011306e..e1bd263 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -255,10 +255,6 @@ static struct scsi_host_template it8213_sht = { .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations it8213_ops = { diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1f8cec..8e565a5 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -620,10 +620,6 @@ static struct scsi_host_template it821x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations it821x_smart_port_ops = { diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 420c343..b994351 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -31,7 +31,7 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 43763c9..e3f6f5d 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -137,10 +137,6 @@ static struct scsi_host_template jmicron_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations jmicron_ops = { diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index d9b94a1..4c282ab 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -104,10 +104,6 @@ static struct scsi_host_template marvell_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations marvell_ops = { diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 9587a89..368fac7 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -280,10 +280,6 @@ static struct scsi_host_template mpc52xx_ata_sht = { .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct ata_port_operations mpc52xx_ata_port_ops = { diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 987c5fa..2858927 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -164,10 +164,6 @@ static struct scsi_host_template mpiix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations mpiix_port_ops = { diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index dbba5b7..f15eb34 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -37,10 +37,6 @@ static struct scsi_host_template netcell_sht = { .slave_destroy = ata_scsi_slave_destroy, /* Use standard CHS mapping rules */ .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations netcell_ops = { diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 078aeda..2147172 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -156,10 +156,6 @@ static struct scsi_host_template ns87410_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations ns87410_port_ops = { diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index dea4690..9cc1d1e 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -232,10 +232,6 @@ static struct scsi_host_template oldpiix_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations oldpiix_pata_ops = { diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 13b63e2..af00c26 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -177,10 +177,6 @@ static struct scsi_host_template opti_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations opti_port_ops = { diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index b70e04c..d1569a7 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -362,10 +362,6 @@ static struct scsi_host_template optidma_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations optidma_port_ops = { diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index ee636be..3e204c3 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -244,10 +244,6 @@ static struct scsi_host_template pdc202xx_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations pdc2024x_port_ops = { diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 1c54673..bc01b17 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c @@ -200,10 +200,6 @@ static struct scsi_host_template radisys_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations radisys_pata_ops = { diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 85c4529..97785b4 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -40,7 +40,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused) for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_ready(dev)) { + if (ata_dev_enabled(dev)) { /* We don't really care */ dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; @@ -69,10 +69,6 @@ static struct scsi_host_template rz1000_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations rz1000_port_ops = { diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 66e8ff4..2af9f8c 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -194,10 +194,6 @@ static struct scsi_host_template sc1200_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations sc1200_port_ops = { diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 5df354d..243130e 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -984,10 +984,6 @@ static struct scsi_host_template scc_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations scc_pata_ops = { diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 3956ef2..fdd9a63 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -313,10 +313,6 @@ static struct scsi_host_template serverworks_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations serverworks_osb4_port_ops = { diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 6770820..8978186 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -230,10 +230,6 @@ static struct scsi_host_template sil680_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct ata_port_operations sil680_port_ops = { diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index fc260d9..25f3b70 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -520,10 +520,6 @@ static struct scsi_host_template sis_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static const struct ata_port_operations sis_133_ops = { diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index e618ffd..33a1663 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -192,10 +192,6 @@ static struct scsi_host_template triflex_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations triflex_port_ops = { diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 96b7179..969b98f 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -300,10 +300,6 @@ static struct scsi_host_template via_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .resume = ata_scsi_device_resume, - .suspend = ata_scsi_device_suspend, -#endif }; static struct ata_port_operations via_port_ops = { diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index f099a1d..4c12d92 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -135,10 +135,6 @@ static struct scsi_host_template inic_sht = { .slave_configure = inic_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const int scr_map[] = { diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 0216974..087f84b 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -323,10 +323,6 @@ static struct scsi_host_template nv_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static struct scsi_host_template nv_adma_sht = { @@ -345,10 +341,6 @@ static struct scsi_host_template nv_adma_sht = { .slave_configure = nv_adma_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations nv_generic_ops = { diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 0a1e417..e8483aa 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -182,10 +182,6 @@ static struct scsi_host_template sil_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations sil_ops = { diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index e6223ba..b1945e6 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -380,10 +380,6 @@ static struct scsi_host_template sil24_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, -#ifdef CONFIG_PM - .suspend = ata_scsi_device_suspend, - .resume = ata_scsi_device_resume, -#endif }; static const struct ata_port_operations sil24_ops = { diff --git a/include/linux/libata.h b/include/linux/libata.h index 73b86dd..6ef4055 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -140,7 +140,6 @@ enum { ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */ ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */ - ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */ ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), @@ -268,13 +267,9 @@ enum { ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), ATA_EH_HARDRESET = (1 << 2), - ATA_EH_SUSPEND = (1 << 3), - ATA_EH_RESUME = (1 << 4), - ATA_EH_PM_FREEZE = (1 << 5), ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, - ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND | - ATA_EH_RESUME | ATA_EH_PM_FREEZE, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ @@ -740,8 +735,6 @@ extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val); extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); #ifdef CONFIG_PM -extern int ata_scsi_device_resume(struct scsi_device *); -extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg); extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg); extern void ata_host_resume(struct ata_host *host); #endif @@ -1016,11 +1009,6 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev) return ata_class_absent(dev->class); } -static inline unsigned int ata_dev_ready(const struct ata_device *dev) -{ - return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED); -} - /* * port helpers */ -- 1.5.0.3 - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
