> The ACPI interface to use can only be safely determined one way - and > that is to see what methods the BIOS has attached to the device and use > those. > > Take the ACPI handle, go look for _GTF, _SDD etc and believe the > firmware. Nothing else works. Actually its even worse a mess than I thought 8( We have to look at the BIOS method offered and we have to know if we changed the mode of the controller. If the BIOS mode of an IDE controller is SFF and we flip it into AHCI mode then we can no longer use the BIOS provided methods because they are the wrong ones. For the sane cases (where we don't frob the device) we can ask the BIOS what methods it has to guess what to use. If we change the mode of the controller we need to look for methods that match our change, and be aware we may have totally hosed the ACPI method support by changing the chip config. Bletch, ACPI, its like openprom crossed with european law, a million times larger than needed, and full of holes. - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
