Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
- Re: i2c-i801 driver quit working in 3.8.11, (continued)
Re: i2c-i801 driver quit working in 3.8.11, Soren Harward
[PATCH 1/1] i2c: imx: Fix incorrect placement of __initdata,
Sachin Kamat
[PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair,
Jingchang Lu
- [PATCH 2/8] i2c: imx: enable clk before write to registers, Jingchang Lu
- [PATCH 3/8] i2c: imx: don't change platform device id_entry directly, Jingchang Lu
- [PATCH 4/8] i2c: imx: wrap registers read/write to inline function, Jingchang Lu
- [PATCH 5/8] i2c: imx: change register offset representation, Jingchang Lu
- [PATCH 6/8] i2c: imx: add INT flag and IEN bit operatation codes, Jingchang Lu
- [PATCH 7/8] i2c: imx: add struct to hold more configurable quirks, Jingchang Lu
- [PATCH 8/8] i2c: imx: Add Vybrid VF610 I2C controller support, Jingchang Lu
- Re: [PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair, Sascha Hauer
- Re: [PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair, Wolfram Sang
[PATCH] i2c-tiny-usb: do not use stack as URB transfer_buffer,
Jussi Kivilinna
[PATCH RESEND 1/2] ARM: dts: vf610-twr: enable i2c0 device,
Jingchang Lu
Re: [PATCH RESEND 1/2] ARM: dts: vf610-twr: enable i2c0 device, Shawn Guo
[PATCH] i2c: add sanity check to i2c_put_adapter,
Sebastian Hesselbarth
[PATCH RESEND 1/3] i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller,
Marek Vasut
[PATCH 05/35] i2c: use dev_get_platdata(),
Jingoo Han
PC to PC link via i2c on nvidia (VGA) cards. Is it possible in theory?, Hiroto Takahashi
[PATCH v4 0/2] support hisilicon i2c,
Zhangfei Gao
[PATCH] i2c: Fix Kontron PLD prescaler calculation,
Michael Brunner
[PATCH v2 0/1 resend] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH 0/2] i2c: davinci: Couple of patches to make i2c usable on Keystone SOCs,
Santosh Shilimkar
i2c-mux: expose i2c bus topology under sysfs, Jeroen De Wachter
[PATCH 06/27] drivers/i2c/busses: don't check resource with devm_ioremap_resource,
Wolfram Sang
[PATCH v4 0/2] iMC SMBUS and DIMM bus probing,
Andy Lutomirski
[PATCH 1/3] i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller,
Marek Vasut
[PATCH v3 0/4] iMC SMBUS, TSOD hwmon devices, and eeprom modalias,
Andy Lutomirski
[PATCH] i2c: Improve logging on failure to probe for ->class devices,
Andy Lutomirski
What endianness is word in i2c_smbus_data?,
Andy Lutomirski
[PATCH v2 0/2] New driver: i2c_imc (Intel LGA2011 iMC SMBUS),
Andy Lutomirski
[PATCH] i2c-omap: always send stop after nack,
Hein Tibosch
piix4_smbus: How to deal with conflicting ACPI regions?, Paul Menzel
[PATCH 0/3] i2c-mv64xxx: Fixes and new feature for controlers embedded in Aramda XP,
Gregory CLEMENT
[PATCH V2 7/7] i2c: i2c-bfin-twi: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 6/7] i2c: puv3: add CONFIG_PM_SLEEP to suspend function, Jingoo Han
[PATCH V2 5/7] i2c: pnx: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 4/7] i2c: stu300: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 3/7] i2c: ocores: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 2/7] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 1/7] i2c: i2c-mpc: add CONFIG_PM_SLEEP to suspend/resume functions,
Jingoo Han
[PATCH v2] i2c: i2c-mxs: Check the return value from stmp_reset_block(),
Fabio Estevam
[PATCH] i2c: i2c-mxs: Check the return value from stmp_reset_block(),
Fabio Estevam
Temporarily disabling SNB package C-states?, Andy Lutomirski
[PATCH] i2c: mpc: Define unique I2C adapter names,
Guenter Roeck
[PATCH 02/12] drivers/i2c/busses: don't use devm_pinctrl_get_select_default() in probe,
Wolfram Sang
[PATCH v2 0/1] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
Re: [lm-sensors] Bug Report: Bus substitution causing a problem,
Guenter Roeck
[PATCH] i2c: mxs: Rework the PIO mode operation,
Marek Vasut
[PATCH 1/2] i2c-designware: make *CNT values configurable,
Mika Westerberg
- [PATCH 2/2] i2c-designware: configure *CNT values from ACPI, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Romain Baeriswyl
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Ryan Mallon
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Wolfram Sang
- [PATCH v2 1/2] i2c designware make SCL and SDA falling time configurable, Romain Baeriswyl
- Re: [PATCH v2 1/2] i2c designware make SCL and SDA falling time configurable, Wolfram Sang
- [PATCH 2/2] i2c designware add support of I2C standard mode, Romain Baeriswyl
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Mika Westerberg
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Shinya Kuribayashi
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Wolfram Sang
- [PATCH v2 2/2] i2c designware add support of I2C standard mode, Romain Baeriswyl
- Re: [PATCH v2 2/2] i2c designware add support of I2C standard mode, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
Re: MTD EEPROM support and driver integration,
Arnd Bergmann
[PATCH] i2c: mxs: fix broken timing calculation,
Lothar Waßmann
[PULL REQUEST] i2c for 3.11,
Wolfram Sang
[PATCH] i2c-designware: configure SDA hold time from ACPI,
Mika Westerberg
[PATCH] i2c: mxs: Better error handling,
Alexandre Belloni
[PATCH] i2c: i2c_mxs: Set ACK_MODE bit,
Fabio Estevam
[PATCH linux-next] i2c-designware: use div_u64 to fix link,
Vincent Stehlé
[RFC 0/2] Request for help: Intel iMC (SNB Xeon) SMBUS driver,
Andy Lutomirski
[PATCH v2] i2c: i2c-mxs: Use DMA mode even for small transfers,
Fabio Estevam
[RFC PATCH] i2c: i2c-mxs: Use DMA mode even for small transfers,
Fabio Estevam
[PATCH 0/4] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH] i2c: iop3xxx: fix build failure after waitqueue changes,
Kevin Hilman
Add I2C with PCA9665,
Elyas Razzaghi
i2c-mxs: Problems with PIO mode on iMX28,
Torsten Fleischer
Writing I2C Sensor Kernel Modules,
Robin Müller-Bady
[PATCH] i2c: reduce parent checking to a NOOP in non-I2C_MUX case,
Phil Carmody
Re: [BUG] mv64xxx i2c bus lock w/ commit eda6bee6c7,
Wolfram Sang
[patch 1/1] i2c-imx: allow autoloading on according to dt ids,
Rtp
[PATCH v3 0/4] i2c-mv64xxx: Fixes and new feature for controlers embedded in Aramda XP,
Gregory CLEMENT
[PATCH] i2c-designware: Manually set RESTART bit between messages,
Chew Chiau Ee
[PATCH] i2c-gpio: added support for I2C_M_STOP flag,
Renaud Cerrato
[PATCH 3/4] i2c-i801: SMBus patch for Intel Coleto Creek DeviceIDs,
Seth Heasley
[PATCH] i2c: mv64xxx: Fix transfer error code,
Guenter Roeck
[PATCH v2 0/2] i2c-mv64xxx: Various fixes,
Gregory CLEMENT
i2c core: issue in of_i2c_register_devices(),
Alexandre Belloni
[PATCH] regulator: tps51632: Get regulator name from i2c_client,
Mikko Perttunen
[PATCH v2 0/2] Fix kernel panics with certain I2C tps6* chips,
Tuomas Tynkkynen
[PATCH v2 2/2] i2c: imx: Add Vybrid VF610 I2C controller support,
Jingchang Lu
[PATCH 1/2] ARM: dts: vf610-twr: enable i2c0 device,
Jingchang Lu
[PATCH 0/2] Fix kernel panics with certain I2C tps6* chips,
Tuomas Tynkkynen
[PATCH v2] i2c-pxa: prepare clock before use,
Daniel Drake
[PATCH V10 Resend] i2c/designware: Provide i2c bus recovery support,
Viresh Kumar
[PATCH v2] i2c: nomadik: allocate adapter number dynamically,
Linus Walleij
[PATCH v3] i2c: vt8500: Add support for I2C bus on Wondermedia SoCs,
Tony Prisk
[PATCH] i2c-pxa: prepare clock before use,
Daniel Drake
[PATCHv5 0/8] Add I2C support for Allwinner SoCs,
Maxime Ripard
[PATCHv4 0/9] Add I2C support for Allwinner SoCs,
Maxime Ripard
- [PATCHv4 1/9] i2c: mv64xxx: Add macros to access parts of registers, Maxime Ripard
- [PATCHv4 3/9] ARM: orion: pass the i2c registers definition through the platform data, Maxime Ripard
- [PATCHv4 2/9] i2c: mv64xxx: make the registers offset configurable, Maxime Ripard
- [PATCHv4 4/9] i2c: mv64xxx: Add Allwinner sun4i compatible, Maxime Ripard
- [PATCHv4 5/9] ARM: sunxi: dt: Add i2c controller nodes to the DTSI, Maxime Ripard
- [PATCHv4 6/9] ARM: sun4i: dt: Add i2c muxing options, Maxime Ripard
- [PATCHv4 8/9] ARM: sun5i: olinuxino: Enable the i2c controllers, Maxime Ripard
- [PATCHv4 7/9] ARM: sun5i: dt: Add i2c muxing options, Maxime Ripard
- [PATCHv4 9/9] ARM: sun4i: cubieboard: Enable the i2c controllers, Maxime Ripard
- Re: [PATCHv4 0/9] Add I2C support for Allwinner SoCs, Arnd Bergmann
[PATCH v2] i2c: vt8500: Add support for I2C bus on Wondermedia SoCs,
Tony Prisk
[PATCH] i2c: nomadik: allocate adapter number dynamically,
Linus Walleij
[PATCH] i2c: nomadik: support elder Nomadiks,
Linus Walleij
[PATCH 0/5] v3.10-rc4: fix OMAP4 boot failure if CONFIG_SENSORS_LM75=y,
Grygorii Strashko
[PATCH 0/2] i2c-mv64xxx: Various fixes,
Gregory CLEMENT
[PATCH 0/2] i2c-mv64xxx: Add I2C Transaction Generator support,
Gregory CLEMENT
[PATCH] i2c-designware-platform: don't check resource with devm_ioremap_resource,
Andy Shevchenko
[PATCH] i2c: pxa: enable high speed mode for i2c bus,
Leilei Shang
i2c: introduce i2c helper i2c_find_client_by_name(),
Bin Gao
[PATCH 1/2] i2c: designware: fix race between subsequent xfers,
Christian Ruppert
[Help] Use I2C in fast mode instead of normal, CF
[PATCH] i2c: Let users disable "Probe an I2C bus for certain devices",
Grygorii Strashko
[PATCH] i2c-intel-mid: remove obsolete driver,
Andy Shevchenko
drivers/i2c/busses/i2c-intel-mid.c, Andy Shevchenko
[PATCH v5] i2c: omap: correct usage of the interrupt enable register,
Oleksandr Dmytryshyn
[PATCH RESEND v2 3/3] i2c-piix4: add AMD CZ SMBus device ID,
Shane Huang
[PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID,
Shane Huang
[PATCH RESEND 1/3] pci_ids: put Hudson-2 device IDs together, Shane Huang
[PATCH] i2c-tools: NULL in i2c-dev.h,
Martin Vogt
[PATCH v4 0/1] i2c: omap: correct usage of the interrupt enable register,
Oleksandr Dmytryshyn
[PATCH 2/2] sensors-detect: Generate XHTML 1.0 compliant markup, Jean Delvare
[PATCH 1/2] decode-dimms: Generate HTML 4.01 compliant markup,
Jean Delvare
[PATCH 11/11] i2c: omap: enhance pinctrl support,
Hebbar Gururaja
Message not available
[PATCH v3 0/1] i2c: omap: correct usage of the interrupt enable register,
Oleksandr Dmytryshyn
[PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID,
Shane Huang
[PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID,
Shane Huang
[PATCH 2/3] ahci: add AMD CZ SATA device ID, Shane Huang
[PATCH 1/3] pci_ids: put Hudson-2 device IDs together,
Shane Huang
[PATCH v2 0/1] i2c: omap: correct usage of the interrupt enable register,
Oleksandr Dmytryshyn
Request for help: accessing i2c from kernel module, CF
License for the libi2c,
Mihai Buha
[PATCH v3 2/2] drivers/misc: at25: convert to use devm_kzalloc,
Nikolay Balandin
[PATCH v3 1/2] drivers/misc: at24: convert to use devm_kzalloc,
Nikolay Balandin
[PATCH 0/1] i2c: omap: correct usage of the interrupt enable register,
Oleksandr Dmytryshyn
[PATCH 1/1] drivers/misc: at2x: use devm_kzalloc() to make cleanup paths simpler,
Nikolay Balandin
[PATCH] i2c:i2c-bfin-twi: Read and write the FIFO in loop.,
Sonic Zhang
[PATCHv3 0/6] Add I2C support for Allwinner SoCs,
Maxime Ripard
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]