On Mon, Apr 28, 2014 at 10:27:48PM +0800, Lan Tianyu wrote: > This patch is to add CONFIG_I2C_ACPI. Current there is a race between > removing I2C ACPI operation region and ACPI AML code accessing. > So make i2c core built-in if CONFIG_I2C_ACPI is set. > > Signed-off-by: Lan Tianyu <tianyu.lan@xxxxxxxxx> > --- > drivers/i2c/Kconfig | 17 ++++++++++++++++- > drivers/i2c/Makefile | 2 +- > include/linux/i2c.h | 2 +- > 3 files changed, 18 insertions(+), 3 deletions(-) > > diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig > index 7b7ea32..c670d49 100644 > --- a/drivers/i2c/Kconfig > +++ b/drivers/i2c/Kconfig > @@ -2,7 +2,9 @@ > # I2C subsystem configuration > # > > -menuconfig I2C > +menu "I2C support" > + > +config I2C > tristate "I2C support" > select RT_MUTEXES > ---help--- > @@ -21,6 +23,17 @@ menuconfig I2C > This I2C support can also be built as a module. If so, the module > will be called i2c-core. > > +config I2C_ACPI > + bool "I2C ACPI support" > + select I2C > + depends on ACPI > + default y > + help > + Say Y here if you want to enable I2C ACPI function. ACPI table > + provides I2C slave devices' information to enumerate these devices. > + This option also allows ACPI AML code to access I2C slave devices > + via I2C ACPI operation region to fulfill ACPI method. I would prefer something like: Say Y here if you want to enable ACPI I2C support. This includes support for automatic enumeration of I2C slave devices and support for ACPI I2C Operation Regions. Operation Regions allow firmware (BIOS) code to access I2C slave devices, such as smart batteries through an I2C host controller driver. But it is really up to you so, Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
