Mon, 7 Apr 2014 08:56:57 +0200 от Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>:
> Hello,
...
> > > On Sun, Apr 06, 2014 at 09:07:07PM +0200, Wolfram Sang wrote:
> > > > During development, the driver first really needed to depend on
> > > > COMMON_CLK only. Later, it was switched to writel_relaxed, but it was
> > > > forgotten to update the dependencies, so build errors occured:
> > > >
> > > > config: make ARCH=i386 allyesconfig
> > > >
> > > > All error/warnings:
> > > >
> > > > drivers/i2c/busses/i2c-cadence.c: In function 'cdns_i2c_clear_bus_hold':
> > > > >> drivers/i2c/busses/i2c-cadence.c:168:3: error: implicit declaration
> > > > >> of function 'writel_relaxed' [-Werror=implicit-function-declaration]
> > > >
> > > > Use a very safe dependency for now.
> > > >
> > > > Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
> > > > ---
> > > > drivers/i2c/busses/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> > > > index 93165ff453ab..3d3b9b3577c5 100644
> > > > --- a/drivers/i2c/busses/Kconfig
> > > > +++ b/drivers/i2c/busses/Kconfig
> > > > @@ -378,7 +378,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
> > > >
> > > > config I2C_CADENCE
> > > > tristate "Cadence I2C Controller"
> > > > - depends on COMMON_CLK
> > > > + depends on ARCH_ZYNQ
> > > I'd suggest:
> > >
> > > depends on ARM && (ARCH_ZYNC || COMPILE_TEST)
> >
> > ARCH_ZYNC || (ARM && COMPILE_TEST)
> >
> > Same, but more clear.
> "more clear" might be subjective, at least for me I don't see a benefit
> from one over the other.
>
> hmm, considering a (hypothetical) driver that depends on I2C and is
> available on Zync but compiles on ARM, it would need either:
No. Look at drivers/i2c/Kconfig:
"source drivers/i2c/busses/Kconfig" is under "if I2C" already.
---
��.n��������+%������w��{.n�����{��-��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
