Hi Mike, The cadence driver is not in mainline yet. I think for our vendor tree we can pretty much take it this way. Regarding getting this into mainline, I'll send another iteration of the change set and include these changes. On Mon, 2014-03-10 at 12:12PM +0100, Mike Looijmans wrote: > Pressing CTRL-C while communicating with an I2C device leads to erratic > behaviour. The cause is that the controller will interrupt the I2C transfer > in progress, and leave the client device in an undefined state. Many > drivers do not handle error return codes on I2C transfers. The calling driver > has no way of telling how much of the transfer has actually completed, so > it cannot reliably determine the device's state. > > The best solution here is to not handle signals in the I2C bus driver at all, > but always complete a transaction before returning control. > > See for a related patch and discussion on this topic: > http://lkml.org/lkml/2014/1/9/246 Can we get your Signed-off-by, please? > --- > drivers/i2c/busses/i2c-cadence.c | 12 ++++-------- > 1 file changed, 4 insertions(+), 8 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c > index 86713d6..32ce2ee 100644 > --- a/drivers/i2c/busses/i2c-cadence.c > +++ b/drivers/i2c/busses/i2c-cadence.c > @@ -452,16 +452,12 @@ static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg, > cdns_i2c_msend(id); > > /* Wait for the signal of completion */ > - ret = wait_for_completion_interruptible_timeout( > - &id->xfer_done, HZ); > - if (ret < 1) { > + ret = wait_for_completion_timeout(&id->xfer_done, HZ); > + if (ret == 0) { To match the style used throughout the file this should just be if (!ret) { Acked-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> Thanks, Sören -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
