On Mon, 2014-04-07 at 10:37AM +0400, Alexander Shiyan wrote: > Mon, 7 Apr 2014 08:31:00 +0200 от Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>: > > Hello, > > > > On Sun, Apr 06, 2014 at 09:07:07PM +0200, Wolfram Sang wrote: > > > During development, the driver first really needed to depend on > > > COMMON_CLK only. Later, it was switched to writel_relaxed, but it was > > > forgotten to update the dependencies, so build errors occured: > > > > > > config: make ARCH=i386 allyesconfig > > > > > > All error/warnings: > > > > > > drivers/i2c/busses/i2c-cadence.c: In function 'cdns_i2c_clear_bus_hold': > > > >> drivers/i2c/busses/i2c-cadence.c:168:3: error: implicit declaration > > > >> of function 'writel_relaxed' [-Werror=implicit-function-declaration] > > > > > > Use a very safe dependency for now. > > > > > > Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx> > > > --- > > > drivers/i2c/busses/Kconfig | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > > > index 93165ff453ab..3d3b9b3577c5 100644 > > > --- a/drivers/i2c/busses/Kconfig > > > +++ b/drivers/i2c/busses/Kconfig > > > @@ -378,7 +378,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ > > > > > > config I2C_CADENCE > > > tristate "Cadence I2C Controller" > > > - depends on COMMON_CLK > > > + depends on ARCH_ZYNQ > > I'd suggest: > > > > depends on ARM && (ARCH_ZYNC || COMPILE_TEST) > > ARCH_ZYNC || (ARM && COMPILE_TEST) Why would you add Zynq to the dependencies? This driver should work on all ARM platforms (more or less, given that the IP is implemented similarly). I think ARM, if it selects COMMON_CLK, is enough. Otherwise ARM && COMMON_CLK. I don't see a good reason to restrict the driver to Zynq only. Sören -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
