On 03/11/2014 05:50 PM, Soren Brinkmann wrote: > Add a driver for the Cadence I2C controller. This controller is for > example found in Xilinx Zynq. > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> > --- > v3: > - incorporate signal handling changes from Mike Looijmans > <mike.looijmans@xxxxxxxx> (https://lkml.org/lkml/2014/3/11/64) > v2: > - make driver depend on COMMON_CLK instead of ARCH_ZYNQ > --- > .../devicetree/bindings/i2c/i2c-cadence.txt | 21 + > MAINTAINERS | 1 + > drivers/i2c/busses/Kconfig | 7 + > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-cadence.c | 898 +++++++++++++++++++++ > 5 files changed, 928 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-cadence.txt > create mode 100644 drivers/i2c/busses/i2c-cadence.c For boot test on zynq zc702 3.14.0-rc6. Tested-by: Michal Simek <michal.simek@xxxxxxxxxx> Thanks, Michal -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
