[PATCH] i2c: mv64xxx: Fix reset controller handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The reset framework recently gained optional stubs when CONFIG_RESET_CONTROLLER
is not selected. It also introduced a function reset_get_optional, that is also
dummy-defined whenever the framework isn't enabled, for drivers that needs an
optional reset controller.

Switch to this function, since the mv64xxx driver is in this case. This also
fixes a compilation breakage whenever the reset framework wasn't selected:

drivers/i2c/busses/i2c-mv64xxx.c:771:2: error: implicit declaration of function 'devm_reset_control_get'

While we're at it, remove the redundant test on dev.of_node surrounding the
calls to reset framework functions, since it will either be a valid pointer, an
error pointer in the case where we called reset_get_optional without an of_node
pointer or if it failed, or NULL if we're not loaded through DT.

Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
---

Obviously, this patch depends on Philipp Zabel's "reset: Add optional resets
and stubs" patch that he merged and will send a pull request for.

 drivers/i2c/busses/i2c-mv64xxx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 203a5482a866..a09af20342ed 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -768,7 +768,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	}
 	drv_data->irq = irq_of_parse_and_map(np, 0);
 
-	drv_data->rstc = devm_reset_control_get(dev, NULL);
+	drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
 	if (IS_ERR(drv_data->rstc)) {
 		if (PTR_ERR(drv_data->rstc) == -EPROBE_DEFER) {
 			rc = -EPROBE_DEFER;
@@ -900,7 +900,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 exit_free_irq:
 	free_irq(drv_data->irq, drv_data);
 exit_reset:
-	if (pd->dev.of_node && !IS_ERR(drv_data->rstc))
+	if (!IS_ERR_OR_NULL(drv_data->rstc))
 		reset_control_assert(drv_data->rstc);
 exit_clk:
 #if defined(CONFIG_HAVE_CLK)
@@ -920,7 +920,7 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 
 	i2c_del_adapter(&drv_data->adapter);
 	free_irq(drv_data->irq, drv_data);
-	if (dev->dev.of_node && !IS_ERR(drv_data->rstc))
+	if (!IS_ERR_OR_NULL(drv_data->rstc))
 		reset_control_assert(drv_data->rstc);
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux