On Thu, Apr 10, 2014 at 11:03:19PM +0000, Du, Wenkai wrote: > Hi all, > > Updated problem descriptions from Mika's feedback and new test data: > > There have been "i2c_designware 80860F41:00: controller timed out" errors > on a number of Baytrail platforms. The issue is caused by incorrect value in > Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. > This causes call to __i2c_dw_enable() to immediately start the transfer which > leads to timeout. There are 3 failure modes observed: > > 1. Failure in S0 to S3 resume path > > The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start > the first transaction after resuming from system sleep, TX_EMPTY interrupt > is already unmasked because of the hardware default. > > 2. Failure in normal operational path > > This failure happens rarely and is hard to reproduce. Debug trace showed that > DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant > TX_EMPTY was unmasked. > > 2. Failure in S3 to S0 suspend path > > This failure also happens rarely and is hard to reproduce. Adding debug trace > that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR > call trace we could conclude TX_EMPTY was unmasked when problem occurred. > > > The patch masks all interrupts before the controller is enabled to resolve the > faulty DW_IC_INTR_MASK conditions. > > Signed-off-by: Wenkai Du <wenkai.du@xxxxxxxxx> Fixed the commit message and improved the comment to: /* enforce disabled interrupts (due to HW issues) */" Applied to for-current, thanks!
Attachment:
signature.asc
Description: Digital signature
