Linux Kernel I2C
[Prev Page][Next Page]
- Re: [PATCH v8 6/8] OF: i2c: Add OF notifier handler
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v8 5/8] of: i2c: Export single device registration method
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH] i2c: omap: fix i207 errata handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH] i2c: omap: fix i207 errata handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
- From: Stijn Devriendt <highguy@xxxxxxxxx>
- Re: [2/5] i2c: davinci: query STP always when NACK is received
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [1/5] i2c: i2c-davinci: switch to use platform_get_irq
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/4] i2c: omap: implement workaround for handling invalid BB-bit values
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 1/4] i2c: omap: cleanup register definitions
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 3/4] i2c: omap: don't reset controller if Arbitration Lost detected
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 4/4] i2c: omap: add notes related to i2c multimaster mode
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [RFC 0/4] i2c: omap: patch series related to multimaster mode
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Aaro Koskinen <aaro.koskinen@xxxxxx>
- Re: [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
- From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
- [PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH] i2c: img-scb: Allow building for MIPS
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH 1/5] i2c: i2c-davinci: switch to use platform_get_irq
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 0/5] i2c: davinci improvements and fixes
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 3/5] i2c: recovery: change input parameter to i2c_adapter for prepare/unprepare_recovery
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 4/5] i2c: davinci: use bus recovery infrastructure
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 5/5] i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH 2/5] i2c: davinci: query STP always when NACK is received
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- [PATCH v7] i2c: rk3x: handle dynamic clock rate changes correctly
- From: Max Schwarz <max.schwarz@xxxxxxxxx>
- Re: [PATCH v6] i2c: rk3x: handle dynamic clock rate changes correctly
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- [GIT PULL] Immutable branch between MFD, GPIO and I2C (Second batch)
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH] dt: Update I2C trivial devices list
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] DT: i2c: Add more devices handled by the adxl34x-i2c driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] DT: i2c: Add more devices handled by the rtc-rs5c372 driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
- From: Baruch Siach <baruch@xxxxxxxxxx>
- Re: [PATCH] i2c: sh_mobile: use proper device for mapping DMA memory
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH] i2c: sh_mobile: use proper device for mapping DMA memory
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- RE: [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
- From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: at91: introduce probe deferring
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] i2c: at91: introduce probe deferring
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH] i2c: at91: introduce probe deferring
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH] i2c: designware: prevent early stop on TX FIFO empty
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: at91: introduce probe deferring
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: imx: simplify i2c_imx_dma_write() a little
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: img-scb: Allow building for MIPS
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: img-scb: Allow building for MIPS
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH] i2c: img-scb: Allow building for MIPS
- From: James Hogan <james.hogan@xxxxxxxxxx>
- [PATCH v6] i2c: rk3x: handle dynamic clock rate changes correctly
- From: Max Schwarz <max.schwarz@xxxxxxxxx>
- Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH] i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 3/3] i2c: rcar: add slave support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 2/3] i2c: slave-eeprom: add eeprom simulator driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 0/3] i2c: slave support framework for Linux devices
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 1/3] i2c: core changes for slave support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
- From: Carlo Caione <carlo@xxxxxxxxxx>
- Re: [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] i2c: meson: add device tree bindings documentation
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] i2c: add support for Amlogic Meson I2C controller
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: acpi: remove unneeded variable initialization
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v11 0/3] i2c: imx: add DMA support for freescale i2c driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: acpi: remove unneeded variable initialization
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH] i2c: acpi: remove unneeded variable initialization
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH V2 4/5] mfd: t7l66xb: prepare/unprepare clocks
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH v2 1/4] mfd: dln2: fix _dln2_transfer return code
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v2 2/4] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v2 3/4] mfd: dln2: add a limit check for invalid echo
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v2 4/4] mfd: dln2: a couple endian fixes
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v2 0/4] dln2 fixes for ib-mfd-gpio-i2c-3.19
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH V2 5/5] mfd: tc6387xb: prepare/unprepare clocks
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH v11 1/3] i2c: imx: Sort include headers alphabetically
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v11 2/3] Documentation:add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v11 0/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v11 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- RE: [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
- From: Feng Kan <fkan@xxxxxxx>
- Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH V2 3/5] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp
- From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
- Re: [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH] Fixes: 1d7afc9 i2c: omap: ack IRQ in parts
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH V2 1/5] serial: pxa: prepare/unprepare clocks
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH V2 5/5] mfd: tc6387xb: prepare/unprepare clocks
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH V2 4/5] mfd: t7l66xb: prepare/unprepare clocks
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH V2 3/5] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH V2 2/5] i2c: pxa: prepare/unprepare clocks
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH V2 1/5] serial: pxa: prepare/unprepare clocks
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Grygorii Strashko <grygorii.strashko@xxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH] i2c: core: Fix probing of i2c slaves without interrupts
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH 3/3] i2c: core: Map OF IRQ at probe time
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH v10 0/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v10 2/3] Documentation:add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v10 1/3] i2c: imx: Sort include headers alphabetically
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v10 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- RE: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
- Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- [PATCH v2] i2c: Driver to expose PowerNV platform i2c busses
- From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH] i2c: pxa: prepare/unprepare clocks
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
- [PATCH 1/3] staging: imx-drm: document internal HDMI I2C master controller DT binding
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- [PATCH 3/3] i2c: i2c-imx-hdmi: add documentation file of the bus
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- [PATCH 2/3] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C master bus
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- Re: [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Felipe Balbi <balbi@xxxxxx>
- [PATCH 2/2] i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- [PATCH 1/2] i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- i2c: omap: fix "Too much work in one IRQ" irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- i2c: omap: fix NACK and Arbitration Lost irq handling
- From: Alexander Kochetkov <al.kochet@xxxxxxxxx>
- Re: How to probe for pca954x multiplexers on a i2c-ocores bus?
- From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
- How to probe for pca954x multiplexers on a i2c-ocores bus?
- From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
- [PATCH 2/2] DT: i2c: Add more devices handled by the adxl34x-i2c driver
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 1/2] DT: i2c: Add more devices handled by the rtc-rs5c372 driver
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH v8 4/8] OF: platform: Add OF notifier handler
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH] i2c: Add parameters to sysfs-added i2c devices
- [PATCH] i2c: at91: introduce probe deferring
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [GIT PULL] Immutable branch between MFD, GPIO and I2C
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
- From: Jeroen De Wachter <jeroen.de.wachter@xxxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: James Hogan <james.hogan@xxxxxxxxxx>
- Re: [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH v8 4/8] OF: platform: Add OF notifier handler
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3 1/3] i2c: meson: add device tree bindings documentation
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v3 2/3] i2c: add support for Amlogic Meson I2C controller
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v3 3/3] ARM: dts: meson: add I2C controller nodes
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH v3 0/3] i2c: add driver for Amlogic Meson I2C controller
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- Re: [PATCH v6 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v7 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v3 1/2] i2c: mux: create symlink to actual mux device
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v3 2/2] i2c: mux: create "channel-n" symlinks for child segments in the mux device
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v6 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v6 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v6 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MIPS/I2C: Move SEAD3 I2C driver to where it belongs.
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
- Re: [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: sh_mobile: improve success message
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 5/5] ARM: shmobile: r8a7791: add DMA nodes for IIC
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 4/5] ARM: shmobile: r8a7790: add DMA nodes for IIC
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: i2c-xiic: Fix big-endian register access
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC PATCH] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C master bus
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- Re: [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LP
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: sh_mobile: improve success message
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/5] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] i2c: sh_mobile: sort includes alphabetically
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4] i2c/at91: adopt pinctrl support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 0/4 v2] i2c-i801: Make interrupt mode more robust
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 4/4 v2] i2c-i801: Drop useless debug message
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 3/4 v2] i2c-i801: Check if interrupts are disabled
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 2/4 v2] i2c-i801: Fallback to polling if request_irq() fails
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 1/4 v2] i2c-i801: Use wait_event_timeout to wait for interrupts
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 0/4 v2] i2c-i801: Make interrupt mode more robust
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH 5/6] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation
- From: Arnd Bergmann <arnd@xxxxxxxx>
- Re: [PATCH v5 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH v5 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
- From: "David E. Box" <david.e.box@xxxxxxxxxxxxxxx>
- Re: [PATCH v5 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH 1/2] mfd: dln2: fix _dln2_transfer return code
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH 1/2] mfd: dln2: fix _dln2_transfer return code
- From: Julia Lawall <julia.lawall@xxxxxxx>
- Re: [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 2/4] i2c-i801: Fallback to polling if request_irq() fails
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 1/2] mfd: dln2: fix _dln2_transfer return code
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 1/2] mfd: dln2: fix _dln2_transfer return code
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH 2/2] i2c: dln2: simplify return flow for dln2_i2c_enable
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH 0/2] fixes for ib-mfd-gpio-i2c-3.19
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] i2c-i801: Fallback to polling if request_irq() fails
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- RE: [PATCH v4] i2c/at91: adopt pinctrl support
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: add support for Amlogic Meson I2C controller
- From: Beniamino Galvani <b.galvani@xxxxxxxxx>
- [PATCH 4/4] i2c-i801: Drop useless debug message
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 3/4] i2c-i801: Check if interrupts are disabled
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 2/4] i2c-i801: Fallback to polling if request_irq() fails
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 1/4] i2c-i801: Use wait_event_timeout to wait for interrupts
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH 0/4] i2c-i801: Make interrupt mode more robust
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v5 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH v5 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH v5 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v5 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v5 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH v4 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v4 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v4 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v4 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LP
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [GIT PULL] Immutable branch between MFD, GPIO and I2C
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH] SMBUS: Add DeviceIDs for SunrisePoint LP
- From: Devin Ryles <devin.ryles@xxxxxxxxx>
- Re: [GIT PULL] Immutable branch between MFD, GPIO and I2C
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v11 0/3] add support for Diolan DLN-2
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v11 0/3] add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [GIT PULL] Immutable branch between MFD, GPIO and I2C
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v11 0/3] add support for Diolan DLN-2
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c-davinci: Handle signals gracefully
- From: Mike Looijmans <mike.looijmans@xxxxxxxx>
- Re: [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: add support for Amlogic Meson I2C controller
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v11 1/3] mfd: add support for Diolan DLN-2 devices
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [PATCH v4] i2c/at91: adopt pinctrl support
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH] i2c: Driver to expose PowerNV platform i2c busses
- From: Neelesh Gupta <neelegup@xxxxxxxxxxxxxxxxxx>
- [PATCH v4] i2c/at91: adopt pinctrl support
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- RE: [PATCH v3 3/3] i2c/at91: adopt pinctrl support
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- Re: [PATCH 3/5] i2c: sh_mobile: Document SoC-specific bindings
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 4/5] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 5/5] ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: [PATCH] i2c-davinci: Handle signals gracefully
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] i2c/at91: add support for runtime PM
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] i2c/at91: add support for system PM
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] i2c/at91: adopt pinctrl support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: exynos5: use proper errno for timeout
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2] i2c: mux: create proper topology in sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PULL REQUEST] i2c for 3.18
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- [PATCH 1/3] SMBUS: Add DeviceIDs for SunrisePoint LP
- From: Devin Ryles <devin.ryles@xxxxxxxxx>
- Re: [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: cadence: Remove .owner field for driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] i2c: qup: Remove .owner field for driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] i2c: core: Map OF IRQ at probe time
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/3] i2c: core: Dispose OF IRQ mapping at client removal time
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: at91: don't account as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: sh_mobile: Document SoC-specific bindings
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/5] i2c: sh_mobile: Add support for r8a73a4 and sh73a0
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c-imx: Use the preferred form for passing a size of a struct
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: remove FSF address
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: i2c-i801 driver quit working in 3.8.11
- From: Soren Harward <stharward@xxxxxxxxx>
- [PATCH] i2c: mux: create "channel-n" symlinks for child segments
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: designware: prevent early stop on TX FIFO empty
- From: Andrew Jackson <Andrew.Jackson@xxxxxxx>
- Re: [RFC] i2c: mux: add mux device to the adapter name
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2] i2c: remove FSF address
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- [PATCH 5/5] ARM: shmobile: r8a7791: add DMA nodes for IIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 4/5] ARM: shmobile: r8a7790: add DMA nodes for IIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 3/5] i2c: sh_mobile: improve success message
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 2/5] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 1/5] i2c: sh_mobile: sort includes alphabetically
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 0/5] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 4/5] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: sh_mobile: Document SoC-specific bindings
- From: Simon Horman <horms@xxxxxxxxxxxx>
- [PATCH 2/2] i2c-mxs: Use the preferred form for passing a size of a struct
- From: Fabio Estevam <festevam@xxxxxxxxx>
- [PATCH 1/2] i2c-imx: Use the preferred form for passing a size of a struct
- From: Fabio Estevam <festevam@xxxxxxxxx>
- Re: [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- [PATCH v11 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v11 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v11 1/3] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v11 0/3] add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v10 1/3] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH 5/5] ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 2/5] i2c: sh_mobile: Add support for r8a73a4 and sh73a0
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 3/5] i2c: sh_mobile: Document SoC-specific bindings
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 4/5] ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 0/5] ARM: shmobile: sh73a0/r8a73a4: i2c-sh_mobile fixes
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- [PATCH 1/5] ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH v10 1/3] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH] i2c: rk3x: fix bug that cause measured high_ns doesn't meet I2C spec
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH v3 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v3 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v3 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [RFC] i2c: mux: add mux device to the adapter name
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v10 1/3] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v10 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Johan Hovold <johan@xxxxxxxxxx>
- [PATCH v10 0/3] add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v10 1/3] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v10 2/3] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v10 3/3] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v9 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v9 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v9 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH] i2c: at91: don't account as iowait
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: i2c-i801 driver quit working in 3.8.11
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: Simultaneously access to one i2c/dev-interface from different process to different i2c devices
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- RE: [PATCH v3 0/3] i2c/at91: add support PM functions
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- Simultaneously access to one i2c/dev-interface from different process to different i2c devices
- From: Matthias Klein <matthias.klein@xxxxxxxxxxx>
- Re: [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- [PATCH] i2c: remove FSF address
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: i2c-i801 driver quit working in 3.8.11
- From: Soren Harward <stharward@xxxxxxxxx>
- [PATCH v2 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v2 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH v2 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Grant Likely <grant.likely@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [RFC 1/3] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2 2/3] ARM: mediatek: Add I2C node for mt8135 and mt8127
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH v2 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH v2 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC] i2c: mux: add mux device to the adapter name
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c: mux: create proper topology in sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH] i2c: at91: don't account as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC 0/2] drivers: spi/i2c: account completions as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC 0/2] drivers: spi/i2c: account completions as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC 0/2] drivers: spi/i2c: account completions as iowait
- From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yao Yuan <yao.yuan@xxxxxxxxxxxxx>
- Re: [RFC 2/3] ARM: shmobile: r8a7790: add DMA nodes for IIC
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC 3/3] ARM: shmobile: r8a7791: add DMA nodes for IIC
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [RFC 1/3] i2c: sh_mobile: add DMA support
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC 1/3] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [RFC 1/3] i2c: sh_mobile: add DMA support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 0/3] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC 3/3] ARM: shmobile: r8a7791: add DMA nodes for IIC
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 2/3] ARM: shmobile: r8a7790: add DMA nodes for IIC
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RFC 0/3] i2c: sh_mobile: add DMA support
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- [PATCH] i2c: mux: create proper topology in sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RFC 0/2] drivers: spi/i2c: account completions as iowait
- From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
- [RFC 1/2] i2c: account completions as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC 2/2] spi: account completions as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC 0/2] drivers: spi/i2c: account completions as iowait
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: James Hogan <james.hogan@xxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: Problem with multiple i2c multiplexers on the same bus
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Rob Herring <robherring2@xxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- [RFC 1/3] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC 3/3] ARM: shmobile: r8a7791: add DMA nodes for IIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC 2/3] ARM: shmobile: r8a7790: add DMA nodes for IIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [RFC 0/3] i2c: sh_mobile: add DMA support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- Re: [PATCH 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [RFC PATCH] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C master bus
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- [RFC PATCH] i2c: i2c-imx-hdmi: add support of iMX6 HDMI DDC I2C master bus
- From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
- Re: [PATCH 0/3] Delay I2C OF IRQ mapping until probe time
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/3] i2c: core: Dispose OF IRQ mapping at client removal time
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] of/irq: Export of_irq_get()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH 0/3] Delay I2C OF IRQ mapping until probe time
- From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
- [PATCH 3/3] i2c: core: Map OF IRQ at probe time
- From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
- [PATCH 2/3] i2c: core: Dispose OF IRQ mapping at client removal time
- From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
- [PATCH 1/3] of/irq: Export of_irq_get()
- From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
- From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
- Re: [PATCH 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: James Hogan <james.hogan@xxxxxxxxxx>
- Re: [PATCH 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
- [PATCH 2/2] DT: i2c: Add binding document for IMG I2C SCB
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH 1/2] i2c: Add Imagination Technologies I2C SCB driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- [PATCH 0/2] i2c: Imagination Technologies I2C adapter driver
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
- Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
- From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] of: spi: Export single device registration method and accessors (v2)
- From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
- [PATCH] of: spi: Export single device registration method and accessors (v2)
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- Re: [PATCH v3 0/3] i2c/at91: add support PM functions
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH v8 7/8] of: spi: Export single device registration method and accessors
- From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 7/8] of: spi: Export single device registration method and accessors
- From: Alexander Sverdlin <alexander.sverdlin@xxxxxxx>
- Re: [PATCH 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: xudong chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH 0/3] ARM: mediatek: Add driver for Mediatek I2C controller
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH 2/3] ARM: mediatek: Add I2C node for mt8135 and mt8127
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
- From: Xudong Chen <xudong.chen@xxxxxxxxxxxx>
- Re: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: RR <rajaram.officemails@xxxxxxxxx>
- Re: [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Scott Wood <scottwood@xxxxxxxxxxxxx>
- [PATCH v8 0/8] Device Tree Overlays - 8th time's the charm
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 2/8] OF: selftest: Add overlay self-test support. (v2)
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 3/8] OF: DT-Overlay configfs interface (v2)
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 5/8] of: i2c: Export single device registration method
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 6/8] OF: i2c: Add OF notifier handler
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 7/8] of: spi: Export single device registration method and accessors
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 8/8] OF: spi: Add OF notifier handler
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 4/8] OF: platform: Add OF notifier handler
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- [PATCH v8 1/8] OF: Introduce DT overlay support. (v2)
- From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
- Re: [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [PATCH v9 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Problem with multiple i2c multiplexers on the same bus
- From: Martin Belanger <martin.belanger@xxxxxxxxxxx>
- Re: [PATCH v9 1/4] mfd: add support for Diolan DLN-2 devices
- From: Joe Perches <joe@xxxxxxxxxxx>
- Re: [PATCH v7 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Re: [PATCH v7 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [PATCH v9 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v9 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v9 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v9 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v9 0/4] mfd: add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- [RFC PATCH V2] ACPI: Add _DEP(Operation Region Dependencies) support to fix battery issue on the Asus T100TA
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH v8 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v8 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: I2C OF IRQ parsing issue due to probe ordering
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v8 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- RE: [PATCH v3 2/3] i2c/at91: add support for system PM
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add generic support passing secondary devices addresses
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- I2C OF IRQ parsing issue due to probe ordering
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] iio: imu: inv_mpu6050: Add i2c mux for by pass
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v3 2/3] i2c/at91: add support for system PM
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
- [PATCH] MIPS/I2C: Move SEAD3 I2C driver to where it belongs.
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
- Q: i2c-mux-pca954x.c : How to get deselect activated via device tree?
- From: Michael Lawnick <ml.lawnick@xxxxxx>
- [PATCH v3 3/3] i2c/at91: adopt pinctrl support
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v3 2/3] i2c/at91: add support for system PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v3 1/3] i2c/at91: add support for runtime PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v3 0/3] i2c/at91: add support PM functions
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- Re: [PATCH v8 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v8 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes
- From: Mark Roszko <mark.roszko@xxxxxxxxx>
- Re: [PATCH 2/2] adv7604: Add support for i2c_new_secondary_device
- From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add generic support passing secondary devices addresses
- From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
- Re: [PATCH v8 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- Re: [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH 2/2] adv7604: Add support for i2c_new_secondary_device
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add generic support passing secondary devices addresses
- From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
- Re: [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: Add generic support passing secondary devices addresses
- From: John de la Garza <john@xxxxxxxxx>
- i2c-dev not showing up on MacBookPro6,2
- From: John de la Garza <john@xxxxxxxxx>
- [PATCH 1/2] i2c: Add generic support passing secondary devices addresses
- From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
- [PATCH 2/2] adv7604: Add support for i2c_new_secondary_device
- From: Jean-Michel Hautbois <jean-michel.hautbois@xxxxxxxxxxx>
- [PATCH] misc: eeprom: at25: add Cypress FRAM functionality
- From: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
- Re: [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Igor Grinberg <grinberg@xxxxxxxxxxxxxx>
- [PATCH v2 3/3] i2c/at91: adopt pinctrl support
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v2 2/3] i2c/at91: add support for system PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v2 1/3] i2c/at91: add support for runtime PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH v2 0/3] i2c/at91: add support PM functions
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- RE: [PATCH 2/3] i2c/at91: add support for system PM
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- RE: [PATCH 1/3] i2c/at91: add support for runtime PM
- From: "Yang, Wenyou" <Wenyou.Yang@xxxxxxxxx>
- Re: [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] i2c/at91: adopt pinctrl support
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH 2/3] i2c/at91: add support for system PM
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: [PATCH 2/3] i2c/at91: add support for system PM
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH 1/3] i2c/at91: add support for runtime PM
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH 3/3] i2c/at91: adopt pinctrl support
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH 2/3] i2c/at91: add support for system PM
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH 1/3] i2c/at91: add support for runtime PM
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
- Re: [PATCH v8 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH v8 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- [PATCH 3/3] i2c/at91: adopt pinctrl support
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH 2/3] i2c/at91: add support for system PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH 1/3] i2c/at91: add support for runtime PM
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PATCH 0/3] i2c/at91: add support PM functions
- From: Wenyou Yang <wenyou.yang@xxxxxxxxx>
- [PULL REQUEST] i2c for 3.18
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c-qoriq: modified compatibility for correct prescaler
- From: Valentin Longchamp <valentin.longchamp@xxxxxxxxxxx>
- Re: [PATH v3 4/4] i2c: i2c-diolan-u2c: sysfs bus frequency support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 2/4] i2c-i801: Add Device IDs for Intel Sunrise Point PCH
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] Documentation/ABI/testing/men_eeprod: Added sysfs description for men_eeprod
- From: Andreas Werner <andreas.werner@xxxxxx>
- [PATCH 1/2] drivers/misc/eeprom/men_eeprod: Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- [PATCH 0/2] Introduce MEN Board Information EEPROM driver
- From: Andreas Werner <andreas.werner@xxxxxx>
- Re: [PATCH 2/4] i2c-i801: Add Device IDs for Intel Sunrise Point PCH
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] misc: eeprom: add driver for Cypress FRAM
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v8 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATH v3 0/4] i2c: show and change bus frequency via sysfs
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATH v3 1/4] i2c: document the existing i2c sysfs ABI
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATH v3 2/4] i2c: document struct i2c_adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATH v3 3/4] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATH v3 4/4] i2c: i2c-diolan-u2c: sysfs bus frequency support
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATH v3 0/4] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH] i2c: Add generic support passing secondary devices addresses
- From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
- [PATCH v8 0/4] mfd: add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v8 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v8 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v8 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v8 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Max Schwarz <max.schwarz@xxxxxxxxx>
- Re: [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [RFC PATCH v2 1/3] i2c: document the existing i2c sysfs ABI
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH v2 2/3] i2c: document struct i2c_adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH v2 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH v2 0/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v2] misc: eeprom: add driver for Cypress FRAM
- From: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
- Re: [PATCH] misc: eeprom: add driver for Cypress FRAM
- From: Varka Bhadram <varkabhadram@xxxxxxxxx>
- [PATCH] misc: eeprom: add driver for Cypress FRAM
- From: Jiri Prchal <jiri.prchal@xxxxxxxxxxx>
- Re: [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Mark Roszko <mark.roszko@xxxxxxxxx>
- [PATCH 2/4] i2c-i801: Add Device IDs for Intel Sunrise Point PCH
- From: James Ralston <james.d.ralston@xxxxxxxxx>
- [RFC/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: i2c-xiic: Fix big-endian register access
- From: Thomas Gessler <Thomas.Gessler@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Max Schwarz <max.schwarz@xxxxxxxxx>
- [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
- Re: [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Max Schwarz <max.schwarz@xxxxxxxxx>
- Re: [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Heiko Stübner <heiko@xxxxxxxxx>
- [PATCH v9 0/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v9 2/3] Documentation:add DMA support for freescale i2c driver
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- [PATCH v9 1/3] i2c: imx: Sort include headers alphabetically
- From: Yuan Yao <yao.yuan@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: MIPS: adds ralink I2C driver
- From: John Crispin <blogic@xxxxxxxxxxx>
- Re: [PATCH] i2c: MIPS: adds ralink I2C driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: MIPS: adds ralink I2C driver
- From: John Crispin <blogic@xxxxxxxxxxx>
- Re: arc platform code updates (was Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller)
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- RE: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Muthu Mani <muth@xxxxxxxxxxx>
- Re: [PATCH v7 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: arc platform code updates (was Re: [PATCH 2/2] i2c: designware: Add support for AMD I2C controller)
- From: Christian Ruppert <christian.ruppert@xxxxxxxxxx>
- Re: [PATCH v7 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH 1/3] i2c: document the existing i2c sysfs ABI
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH 2/3] i2c: document struct i2c_adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH 3/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [RFC PATCH 0/3] i2c: show and change bus frequency via sysfs
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v7 1/4] mfd: add support for Diolan DLN-2 devices
- From: Joe Perches <joe@xxxxxxxxxxx>
- [PATCH v7 3/4] gpiolib: add irq_not_threaded flag to gpio_chip
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v7 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v7 4/4] gpio: add support for the Diolan DLN-2 USB GPIO driver
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v7 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- [PATCH v7 0/4] mfd: add support for Diolan DLN-2
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Mark Roszko <mark.roszko@xxxxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH V2] i2c-designware: Add Intel Baytrail PMIC I2C bus support
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH] at24: extend driver to allow writing via i2c_smbus_write_byte_data
- From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
- Re: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- [PATCH 2/3] i2c: qup: Remove .owner field for driver
- From: Kiran Padwal <kiran.padwal@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL
- From: Addy Ke <addy.ke@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: RR <rajaram.officemails@xxxxxxxxx>
- [PATCH] i2c: mpc: Report correct I2C error codes on Freescale MPC i2c bus driver
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- Re: [PATCH 2/2] input: cros_ec_keyb: Add of match table
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v6 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Octavian Purdila <octavian.purdila@xxxxxxxxx>
- Re: [PATCH v6 2/4] i2c: add support for Diolan DLN-2 USB-I2C adapter
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH 5/6] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH 2/6] Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation
- From: Mark Rutland <mark.rutland@xxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v6 1/4] mfd: add support for Diolan DLN-2 devices
- From: Johan Hovold <johan@xxxxxxxxxx>
- Re: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: Alexandre Courbot <gnurou@xxxxxxxxx>
- RE: [PATCH v3 3/3] gpio: add support for Cypress CYUSBS234 USB-GPIO adapter
- From: Muthu Mani <muth@xxxxxxxxxxx>
- RE: [PATCH v3 1/3] mfd: add support for Cypress CYUSBS234 USB Serial Bridge controller
- From: Muthu Mani <muth@xxxxxxxxxxx>
- Re: [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]