Hi Wolfram > Here are the driver updates to support this new SoC. Since I don't have HW > access, this is a request for testing. The IP cores are backwards compatible to > Gen2. So, as long as the clocks are properly setup and the bus speed is OK, > the rest should work out of the box. > > Question: Shall I prototype the dtsi additions for these modules? On the one > hand, this is quite some change for not being able to test. On the other hand, > other people might be so busy setting up the rest, so it may be useful after > all. > > > Wolfram Sang (2): > i2c: rcar: add support for r8a7795 (R-Car H3) > i2c: sh_mobile: add support for r8a7795 (R-Car H3) > > Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 + > Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt | 1 + > drivers/i2c/busses/i2c-rcar.c | 3 +++ > drivers/i2c/busses/i2c-sh_mobile.c | 1 + > 4 files changed, 6 insertions(+) For all patches, on Salvator-X board with ak4613 / cs2000 chip Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
