On Tue, Sep 22, 2015 at 10:50:21AM +0100, Hou Zhiqiang wrote: > Hi Mark, > > > -----Original Message----- > > From: Mark Rutland [mailto:mark.rutland@xxxxxxx] > > Sent: 2015年9月22日 9:24 > > To: Hou Zhiqiang-B48286; marc.zyngier@xxxxxxx > > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Catalin Marinas; Will Deacon; > > linux-i2c@xxxxxxxxxxxxxxx; linux-watchdog@xxxxxxxxxxxxxxx; linux- > > doc@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; Xie Shaohui-B21989; > > corbet@xxxxxxx; Sharma Bhupesh-B45370; mturquette@xxxxxxxxxxxx; wsa@the- > > dreams.de; sboyd@xxxxxxxxxxxxxx; wim@xxxxxxxxx; Song Wenbin-B53747; Wood > > Scott-B07421; Hu Mingkai-B21284; Li Yang-Leo-R58472 > > Subject: Re: [PATCH 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC > > > > Hi, > > > > > +/memreserve/ 0x80000000 0x00010000; > > > > Why is this necessary? > > This memory region is pre-reserved for the spin-table/psci, although didn't add > Enable method of secondary cores. Your PSCI implementation isn't in secure memory? > > > + ifc: ifc@1530000 { > > > + compatible = "fsl,ifc", "simple-bus"; > > > + reg = <0x0 0x1530000 0x0 0x10000>; > > > + interrupts = <0 43 0x4>; > > > + }; > > > > Why simple-bus? > > There are 3 child node located in dtsi file that should be created and added > to platform device list. Are they usable even if the kernel knew nothing about the IFC node? If not, the IFC driver should probe them, and simple-bus should go. > > > + memory@80000000 { > > > + device_type = "memory"; > > > + reg = <0x0 0x80000000 0 0x80000000>; > > > + /* DRAM space 1 - 2 GB DRAM */ > > > > I don't understand the comment. This describes 2GB at 2GB. > > > > Yes, there is a 2GB space for DRAM from address 2G. > The DRAM address 0x0 will be remapped to SoC address 2G, this remap is done by hardware. I just realised my mistake -- I read this as "1 to 2 GB", when this is actually "DRAM space 1". Sorry for the noise. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
