Hi,
> +/memreserve/ 0x80000000 0x00010000;
Why is this necessary?
If this is necessary, please add a comment stating what this is for.
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x3>;
> + clocks = <&clockgen 1 0>;
> + };
Missing enable-method properties on all the secondary CPUs.
[...]
> + gic: interrupt-controller@1400000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x1401000 0 0x1000>, /* GICD */
> + <0x0 0x1402000 0 0x1000>, /* GICC */
> + <0x0 0x1404000 0 0x2000>, /* GICH */
> + <0x0 0x1406000 0 0x2000>; /* GICV */
> + interrupts = <1 9 0xf08>;
> + };
These sizes don't look right.
To the best of my knowledge, GICC (and GICV) should be 0x2000 in size, while
GICD and GICH should be 0x1000.
[...]
> + ifc: ifc@1530000 {
> + compatible = "fsl,ifc", "simple-bus";
> + reg = <0x0 0x1530000 0x0 0x10000>;
> + interrupts = <0 43 0x4>;
> + };
Why simple-bus?
> + clockgen: clocking@1ee1000 {
> + compatible = "fsl,ls1043a-clockgen";
> + reg = <0x0 0x1ee1000 0x0 0x1000>;
> + #clock-cells = <2>;
> + clocks = <&sysclk>;
> + sysclk: sysclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + clock-output-names = "sysclk";
> + };
> + };
Why does this fixed clock live under the clockgen? It should live directly
under the root node.
[...]
> + pcie@3400000 {
> + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
> + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
> + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
> + reg-names = "regs", "config";
> + interrupts = <0 118 0x4>, /* controller interrupt */
> + <0 117 0x4>; /* PME interrupt */
> + interrupt-names = "intr", "pme";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <4>;
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
> + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> + msi-parent = <&msi1>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
> + <0000 0 0 2 &gic 0 111 0x4>,
> + <0000 0 0 3 &gic 0 112 0x4>,
> + <0000 0 0 4 &gic 0 113 0x4>;
> + };
> +
> + pcie@3500000 {
> + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
> + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
> + 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
> + reg-names = "regs", "config";
> + interrupts = <0 128 0x4>,
> + <0 127 0x4>;
> + interrupt-names = "intr", "pme";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <2>;
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
> + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> + msi-parent = <&msi2>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
> + <0000 0 0 2 &gic 0 121 0x4>,
> + <0000 0 0 3 &gic 0 122 0x4>,
> + <0000 0 0 4 &gic 0 123 0x4>;
> + };
> +
> + pcie@3600000 {
> + compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
> + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
> + 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
> + reg-names = "regs", "config";
> + interrupts = <0 162 0x4>,
> + <0 161 0x4>;
> + interrupt-names = "intr", "pme";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <2>;
> + bus-range = <0x0 0xff>;
> + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
> + 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
> + msi-parent = <&msi3>;
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
> + <0000 0 0 2 &gic 0 155 0x4>,
> + <0000 0 0 3 &gic 0 156 0x4>,
> + <0000 0 0 4 &gic 0 157 0x4>;
> + };
You wait ages for a bus, then three show up at once...
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0 0x80000000>;
> + /* DRAM space 1 - 2 GB DRAM */
I don't understand the comment. This describes 2GB at 2GB.
Does the bootloader overwrite this?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
