Linux Kernel I2C

• Thread Index

• [PATCH v2 0/9] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Clear current message and count after a transaction
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH v14] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Clear current message and count after a transaction
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v3 0/3] i2c: at91: slave mode support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: imx: refactor error handling on i2c_imx_dma_request()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/6] i2c: mediatek: remove completion_done()
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH v2 0/6] add i2c support for mt7629 and mt8183
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 1/6] dt-bindings: i2c: Add Mediatek MT7629 i2c binding
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 2/6] i2c: mediatek: speeds is replaced by macros definitions
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 6/6] i2c: mediatek: Add i2c support for MediaTek MT8183
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 5/6] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• [PATCH 4/6] i2c: mediatek: Add offsets array for new i2c registers
  • From: qii wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v13] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH] i2c: bcm2835: Clear current message and count after a transaction
  • From: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] i2c: dev: prevent adapter retries being set as minus value
  • From: Yi Zeng <yizeng@xxxxxxxxxxxx>
• Re: [PATCH 07/10] i2c: sprd: use core helper to mark adapter suspended
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 06/10] i2c: sprd: don't use pdev as variable name for struct device *
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 00/10] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 04/10] i2c: brcmstb: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 02/10] i2c: reject new transfers when adapters are suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 01/10] i2c: add suspended flag and accessors for i2c adapters
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/10] i2c: synquacer: remove unused is_suspended flag
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 07/10] i2c: sprd: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 05/10] i2c: zx2967: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 06/10] i2c: sprd: don't use pdev as variable name for struct device *
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 09/10] i2c: s3c2410: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 08/10] i2c: exynos5: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 10/10] i2c: rcar: add suspend/resume support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC/RFT 01/10] i2c: add 'is_suspended' flag for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Add support for Intel Cedar Fork
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [RFC/RFT 01/10] i2c: add 'is_suspended' flag for i2c adapters
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: ismt: Add support for Intel Cedar Fork
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC/RFT 10/10] i2c: rcar: add suspend/resume support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC/RFT 01/10] i2c: add 'is_suspended' flag for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH V1 2/2] arm64: dts: tegra186: Device Tree Updates for Tegra186 I2C
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 1/2] i2c: tegra: Add HW feature structure for Tegra186
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC/RFT 08/10] i2c: exynos5: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] v4.19-stable randconfig fixes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/7] v4.19-stable randconfig fixes
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Fix the hold bit setting
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC/RFT 09/10] i2c: s3c2410: use core helper to mark adapter suspended
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [RFC/RFT 08/10] i2c: exynos5: use core helper to mark adapter suspended
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [GIT PULL] at24: updates for v4.21
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH 0/7] v4.19-stable randconfig fixes
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Fix the hold bit setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: tegra: Switch to SPDX identifier
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: tegra: Add missing kerneldoc for some fields
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: tegra: Cleanup kerneldoc comments
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: axxia: support sequence command mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL] at24: updates for v4.21
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: i2c: Add S700 support for Actions Semi Soc's
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 12/12] i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] i2c: tegra: Switch to SPDX identifier
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 2/3] i2c: tegra: Add missing kerneldoc for some fields
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 1/3] i2c: tegra: Cleanup kerneldoc comments
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v4] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 0/7] v4.19-stable randconfig fixes
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v13] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH] i2c: cadence: Fix the hold bit setting
  • From: Kyle Roeschley <kyle.roeschley@xxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v3] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH] i2c: cadence: Fix the hold bit setting
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: sh_mobile: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH] i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E)
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: rcar: Add r8a774c0 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v2] i2c: axxia: support sequence command mode
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• [PATCH v2] i2c: axxia: support sequence command mode
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 03/73] i2c: rcar: check bus state before reinitializing
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 66/73] i2c: axxia: properly handle master timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 67/73] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 68/73] i2c: uniphier: fix violation of tLOW requirement for Fast-mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 39/41] i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 36/41] i2c: axxia: properly handle master timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 32/34] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 31/34] i2c: axxia: properly handle master timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 22/23] i2c: axxia: properly handle master timeout
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 23/23] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 16/16] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 38/41] i2c: uniphier: fix violation of tLOW requirement for Fast-mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 37/41] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 69/73] i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] Revert "i2c: cadance: fix ctrl/addr reg write order"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "i2c: cadance: fix ctrl/addr reg write order"
  • From: Kyle Roeschley <kyle.roeschley@xxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Benson Leung <bleung@xxxxxxxxxx>
• [GIT PULL] at24: updates for v4.21
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v13] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] i2c: Add Actions Semiconductor Owl family S700 I2C support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: nvidia-gpu: mark resume function as __maybe_unused
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add entry for i2c-axxia driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: powermac: Use of_node_name_eq for node name comparisons
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c-axxia: check for error conditions first
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c-axxia: dedicated function to set client addr
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c-axxia: support sequence command mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: use correct vendor prefix for atmel's at24 EEPROMs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: of: Try to find an I2C adapter matching the parent
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: replace spin_lock_irqsave with spin_lock in ISR
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/3] i2c: at91: slave mode support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [RFC/RFT 04/10] i2c: brcmstb: use core helper to mark adapter suspended
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH 3/3] i2c-axxia: support sequence command mode
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH 2/3] i2c-axxia: check for error conditions first
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH 1/3] i2c-axxia: dedicated function to set client addr
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add entry for i2c-axxia driver
  • From: "Sverdlin, Alexander (Nokia - DE/Ulm)" <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: nvidia-gpu: mark resume function as __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: add entry for i2c-axxia driver
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: i2c: Add S700 support for Actions Semi Soc's
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 4/4] arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 0/4] Add Actions Semi Owl family S700 I2C support
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 3/4] i2c: Add Actions Semiconductor Owl family S700 I2C support
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v3 2/4] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: Add Mediatek MT7629 i2c binding
  • From: mtk15107 <qii.wang@xxxxxxxxxxxx>
• Re: [RFC/RFT 05/10] i2c: zx2967: use core helper to mark adapter suspended
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [RFC/RFT 01/10] i2c: add 'is_suspended' flag for i2c adapters
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC/RFT 10/10] i2c: rcar: add suspend/resume support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC/RFT 02/10] i2c: reject new transfers when adapters are suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 01/10] i2c: add 'is_suspended' flag for i2c adapters
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC/RFT 03/10] i2c: synquacer: remove unused is_suspended flag
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC/RFT 05/10] i2c: zx2967: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 04/10] i2c: brcmstb: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 06/10] i2c: sprd: don't use pdev as variable name for struct device *
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 09/10] i2c: s3c2410: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 08/10] i2c: exynos5: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 10/10] i2c: rcar: add suspend/resume support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 07/10] i2c: sprd: use core helper to mark adapter suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 03/10] i2c: synquacer: remove unused is_suspended flag
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC/RFT 00/10] i2c: move handling of suspended adapters to the core
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: nvidia-gpu: mark resume function as __maybe_unused
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 3/3] i2c-axxia: support sequence command mode
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• [PATCH 2/3] i2c-axxia: check for error conditions first
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• [PATCH 1/3] i2c-axxia: dedicated function to set client addr
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• [PATCH 0/3] i2c-axxia: support Sequence command
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: Add Actions Semiconductor Owl family S700 I2C support
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: Add S700 support for Actions Semi Soc's
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Add Actions Semi Owl family S700 I2C support
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 0/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: at91: Save the bus clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• [PATCH 1/1] i2c: Fix value of the delay-us property in i2c-gpio dt binding docs
  • From: Sebastian Panceac <spanceac@xxxxxxxxx>
• [PATCH v13] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v12] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v12] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: I2C boot issue with RPI3B
  • From: Sergey Suloev <ssuloev@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: eeprom: at24: add "atmel,24c2048"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] Revert "i2c: cadance: fix ctrl/addr reg write order"
  • From: Kyle Roeschley <kyle.roeschley@xxxxxx>
• Re: I2C boot issue with RPI3B
  • From: Sergey Suloev <ssuloev@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: I2C boot issue with RPI3B
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: eeprom: at24: add "atmel,24c2048"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: eeprom: at24: add "atmel,24c2048"
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• I2C boot issue with RPI3B
  • From: Sergey Suloev <ssuloev@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: use correct vendor prefix for atmel's at24 EEPROMs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [2nd RESEND PATCH 1/2] i2c: enable buses to save their clock frequency in adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RESEND PATCH] i2c: at91: switched to resume/suspend callbacks.
  • From: <Andrei.Stefanescu@xxxxxxxxxxxxx>
• [2nd RESEND PATCH 2/2] i2c: at91: Save the bus clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [2nd RESEND PATCH 1/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [2nd RESEND PATCH 0/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH] decode-dimms: Move SDR-specific code
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] decode-dimms: Print SPD revision for DDR3 too
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] Revert "i2c: cadance: fix ctrl/addr reg write order"
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 0/4] UniPhier I2C fixes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] Revert "i2c: cadance: fix ctrl/addr reg write order"
  • From: Kyle Roeschley <kyle.roeschley@xxxxxx>
• [PATCH 1/3] i2c: ocores: Add support for IO mapper registers.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 2/3] i2c: ocores: Add support for bus clock via platform data
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 0/3] i2c-ocores: Add IO mapped polled support
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 3/3] i2c: ocores: Add support for polling interrupt status
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] dt-bindings: i2c: use correct vendor prefix for atmel's at24 EEPROMs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: use correct vendor prefix for atmel's at24 EEPROMs
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: use correct vendor prefix for atmel's at24 EEPROMs
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/4] i2c: uniphier-f: fix timeout error after reading 8 bytes
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 4/4] i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 3/4] i2c: uniphier: fix violation of tLOW requirement for Fast-mode
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 2/4] i2c: uniphier-f: fill TX-FIFO only in IRQ handler for repeated START
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 0/4] UniPhier I2C fixes
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH] i2c: powermac: Use of_node_name_eq for node name comparisons
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c-tools: Consistently use snprintf instead of sprintf
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• Re: [PATCH 3/5] i2c: mediatek: Add offsets array for new i2c registers
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: Add Mediatek MT7629 i2c binding
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: added driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [RFC] i2c: hold the core_lock for the whole execution of i2c_register_adapter()
  • From: "Stepien, Slawomir (Nokia - PL/Wroclaw)" <slawomir.stepien@xxxxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v5 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: "Shah, Nehal-bakulchandra" <Nehal-bakulchandra.Shah@xxxxxxx>
• [PATCH v11] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH 0/5] add i2c support for mt7629 and mt8183
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH 3/5] i2c: mediatek: Add offsets array for new i2c registers
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: i2c: Add Mediatek MT7629 i2c binding
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH 5/5] i2c: mediatek: Add i2c compatible for MediaTek MT8183
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions
  • From: <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] ARM i.MX: Fix a kernel panic in i2c_imx_clk_notifier_call().
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• i2c-tools 4.1 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c-axxia: properly handle master timeout
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v5 02/15] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 15/15] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 06/15] platform/x86: intel_cht_int33fe: Get rid of obsolete conditional
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/15] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] i2c: mux: demux-pinctrl: handle failure case of devm_kstrdup()
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i2c-stm32f7: add PM Runtime support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 14/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 08/15] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 05/15] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: imx: refactor error handling on i2c_imx_dma_request()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 1/1] i2c: imx: refactor error handling on i2c_imx_dma_request()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v5 14/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v4 2/2] eeprom: at24: Add 24c2048
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: eeprom: at24: add "atmel,24c2048"
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [PATCH v2 01/25] nvmem: add new config option
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 01/25] nvmem: add new config option
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 01/25] nvmem: add new config option
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 01/25] nvmem: add new config option
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: meson: add support for Meson G12A SoC I2C controller
  • From: Jian Hu <jian.hu@xxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Jian Hu <jian.hu@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: meson: add support for Meson G12A SoC I2C controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: meson: add Meson G12A SoC i2c compatible string
  • From: Jian Hu <jian.hu@xxxxxxxxxxx>
• [PATCH 2/2] i2c: meson: add support for Meson G12A SoC I2C controller
  • From: Jian Hu <jian.hu@xxxxxxxxxxx>
• [PATCH 0/2] i2c: meson: add support for Meson G12A SoC i2c controller
  • From: Jian Hu <jian.hu@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: don't print error if DMA is not configured
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: don't print error if DMA is not configured
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v9 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v9 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 6/6] i2c: at91: Convert to use struct i2c_timings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 05/15] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 14/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v5 07/15] platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 02/15] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 04/15] platform/x86: i2c-multi-instantiate: Defer probe when no adapter found
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 03/15] platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 11/15] platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 08/15] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 05/15] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 14/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 10/15] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 13/15] platform/x86: i2c-multi-instantiate: Allow to have same slaves
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 12/15] platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 15/15] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 01/15] platform/x86: intel_cht_int33fe: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 06/15] platform/x86: intel_cht_int33fe: Get rid of obsolete conditional
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 04/15] platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 03/15] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 01/15] defconfig: enable I2C_DEBUG_CORE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 13/15] platform/x86: i2c-multi-instantiate: Allow to have same slaves
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 06/15] platform/x86: intel_cht_int33fe: Get rid of obsolete conditional
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 11/15] platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 10/15] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 07/15] platform/x86: i2c-multi-instantiate: Get rid of obsolete conditional
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 12/15] platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 08/15] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 14/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 05/15] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 02/15] platform/x86: intel_cht_int33fe: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 15/15] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 09/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: replace spin_lock_irqsave with spin_lock in ISR
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-tegra: replace spin_lock_irqsave with spin_lock in ISR
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v10] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v3 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v3 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 04/13] platform/x86: i2c-multi-instantiate: Defer probe when no adapter found
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 00/13] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 06/13] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 08/13] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 11/13] platform/x86: i2c-multi-instantiate: Allow to have same slaves
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 10/13] platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 13/13] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 07/13] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 09/13] platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 12/13] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 02/13] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 03/13] platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3] i2c: i2c-stm32f7: add PM Runtime support
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2] i2c: i2c-stm32f7: add PM Runtime support
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2 07/13] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: sh_mobile: add support for r8a77990 (R-Car E3)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: sh_mobile: document support for r8a77990 (R-Car E3)
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-axxia: properly handle master timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-stm32f7: add PM Runtime support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [5/6] drivers/i2c: Remove caller signal_pending branch predictions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: don't print error message on probe defer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: check bus state before reinitializing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH 08/17] i2c: bcm2835: Switch to SPDX identifier
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] i2c: nvidia-gpu: limit reads also for combined messages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: nvidia-gpu: adhere to I2C fault codes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V2 0/5] i2c:ocores: improvements
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: don't print error if DMA is not configured
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 07/13] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 06/13] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: "Shah, Nehal-bakulchandra" <Nehal-bakulchandra.Shah@xxxxxxx>
• [PATCH v2 3/4] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: Add S700 support for Actions Semi Soc's
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 2/4] i2c: Add Actions Semiconductor Owl family S700 I2C support
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 4/4] arm64: dts: actions: s700-cubieboard7: Enable I2C0 and I2C1
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• [PATCH v2 0/4] Add Actions Semi Owl family S700 I2C support
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH v2 02/13] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/13] platform/x86: i2c-mutli-instantiate: Defer probe when no adapter found
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/13] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/13] platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/13] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/13] platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/13] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/13] platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/13] platform/x86: intel_cht_int33fe: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/13] platform/x86: i2c-multi-instantiate: Allow to have same slaves
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/13] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/13] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 12/13] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 13/13] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/15] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Use correct vendor prefix for Atmel
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: sh_mobile: document support for r8a77990 (R-Car E3)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: sh_mobile: add support for r8a77990 (R-Car E3)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Upcoming release of i2c-tools
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Vincent Palatin <vpalatin@xxxxxxxxx>
• Re: [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.18 39/59] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] i3c: master: dw: split dw-i3c-master.c into master and bus specific parts
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Vincent Palatin <vpalatin@xxxxxxxxx>
• Re: [PATCH] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] py-smbus: fix i2c_smbus_* error propagation
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] py-smbus: fix i2c_smbus_* error propagation
  • From: Georgii Staroselskii <georgii.staroselskii@xxxxxxxxx>
• Re: [PATCH v1 06/15] i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/15] i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 14/15] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/2] i2c: sh_mobile: add support for r8a77990 (R-Car E3)
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• [PATCH 1/2] i2c: sh_mobile: document support for r8a77990 (R-Car E3)
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• [PATCH 0/2] i2c: sh_mobile: add support for r8a77990 (R-Car E3)
  • From: Simon Horman <horms+renesas@xxxxxxxxxxxx>
• Re: [PATCH v1 09/15] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 06/15] i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v1 04/15] platform/x86: i2c-mutli-instantiate: Defer probe when no adapter found
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/15] platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 14/15] ACPI / scan: Create platform device for BOSC0200 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/15] i2c: acpi: Introduce i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/15] i2c: acpi: Use ACPI_FAILURE instead of !ACPI_SUCCESS
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/15] platform/x86: intel_cht_int33fe: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/15] platform/x86: i2c-multi-instantiate: Accept errors of i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/15] platform/x86: i2c-multi-instantiate: Count I2cSerialBus() resources
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 15/15] iio: inv_mpu6050: Use i2c_acpi_get_i2c_resource() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/15] platform/x86: intel_cht_int33fe: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/15] i2c: acpi: Return error pointers from i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/15] i2c: acpi: Assign fwnode for devices created via i2c_acpi_new_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 12/15] platform/x86: i2c-multi-instantiate: Allow to have same slaves
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/15] platform/x86: i2c-multi-instantiate: Distinguish IRQ resource type
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 13/15] ACPI / scan: Create platform device for INT3515 ACPI nodes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 00/15] i2c-multi-instantiate: Adapt for INT3515 and alike
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH v2] i2c: i2c-stm32f7: add PM Runtime support
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v2 2/2] i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v2 0/2] SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH 08/17] i2c: bcm2835: Switch to SPDX identifier
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1] i2c: i2c-stm32f7: add PM Runtime support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-stm32f7: add PM Runtime support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 02/25] mtd: add support for reading MTD devices via the nvmem API
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 11/25] net: cadence: switch to using nvmem_get_mac_address()
  • From: <Nicolas.Ferre@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 12/25] of: net: kill of_get_nvmem_mac_address()
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3] i2c: imx: check bus for busy before signaling start condition.
  • From: Steven Weaver <steve@xxxxxxxxxxxxx>
• [PATCH v2] i2c: imx: check bus for busy before signaling start condition.
  • From: Steven Weaver <steve@xxxxxxxxxxxxx>
• [PATCH] i2c: imx: check bus for busy before signaling start condition.
  • From: Steven Weaver <steve@xxxxxxxxxxxxx>
• [PATCH] i2c-axxia: properly handle master timeout
  • From: "Adamski, Krzysztof (Nokia - PL/Wroclaw)" <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Przemyslaw Gaj <pgaj@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH v1 2/2] i2c: i2c-stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v1 1/2] dt-bindings: i2c-stm32: SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v1 0/2] SYSCFG Fast Mode Plus support for I2C STM32F7
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v1] i2c: i2c-stm32f7: add PM Runtime support
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH 5/6] drivers/i2c: Remove caller signal_pending branch predictions
  • From: Davidlohr Bueso <dave@xxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: at91: switched to resume/suspend callbacks.
  • From: <Andrei.Stefanescu@xxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• RE: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Vincent Palatin <vpalatin@xxxxxxxxx>
• Re: [PATCH] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: don't print error message on probe defer
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c-tools: decode-dimms: New manufacturer names from JEP106AX
  • From: Vincent Palatin <vpalatin@xxxxxxxxx>
• Re: [PATCH AUTOSEL 4.18 39/59] i2c: omap: Enable for ARCH_K3
  • From: Vignesh R <vigneshr@xxxxxx>
• RE: [PATCH 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH AUTOSEL 4.18 39/59] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 17/27] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 3.18 3/3] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 8/8] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 11/13] i2c: omap: Enable for ARCH_K3
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] i2c: imx: don't print error message on probe defer
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v10] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH v4 3/3] MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v4 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v4 2/3] dt-binding: i3c: Document Synopsys DesignWare I3C
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 00/25] at24: remove
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 02/25] mtd: add support for reading MTD devices via the nvmem API
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 04/25] ARM: davinci: dm644x-evm: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 08/25] ARM: davinci: dm850-evm: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 05/25] ARM: davinci: dm646x-evm: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 09/25] ARM: davinci: da850-evm: remove unnecessary include
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 00/25] at24: remove
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 13/25] net: davinci_emac: use nvmem_get_mac_address()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 12/25] of: net: kill of_get_nvmem_mac_address()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 11/25] net: cadence: switch to using nvmem_get_mac_address()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 14/25] ARM: davinci: da850-evm: remove dead MTD code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 15/25] ARM: davinci: mityomapl138: don't read the MAC address from machine code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 18/25] ARM: davinci: dm644x-evm: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 16/25] ARM: davinci: dm365-evm: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 19/25] ARM: davinci: dm646x-evm: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 20/25] ARM: davinci: sffsdr: fix the at24 eeprom device name
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 21/25] ARM: davinci: sffsdr: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 22/25] ARM: davinci: remove dead code related to MAC address reading
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 25/25] eeprom: at24: remove at24_platform_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 24/25] ARM: davinci: mityomapl138: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 23/25] ARM: davinci: mityomapl138: use nvmem notifiers
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 17/25] ARM: davinci: da830-evm: use device properties for at24 eeprom
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 10/25] net: ethernet: provide nvmem_get_mac_address()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 07/25] ARM: davinci: mityomapl138: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 06/25] ARM: davinci: da830-evm: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 03/25] ARM: davinci: dm365-evm: use cell nvmem lookup for mac address
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 01/25] nvmem: add new config option
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] arm64: dts: actions: s700: Add I2C controller nodes
  • From: Parthiban Nallathambi <pn@xxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH] i2c: rcar: check bus state before reinitializing
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6] i2c: imx: add slave support
  • From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2] i2c: imx: don't print error if DMA is not configured
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v6] i2c: imx: add slave support
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v6] i2c: imx: add slave support
  • From: Zhang Ying-22455 <ying.zhang22455@xxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH v9] i2c: Add drivers for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH 08/17] i2c: bcm2835: Switch to SPDX identifier
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH 08/17] i2c: bcm2835: Switch to SPDX identifier
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• [PATCH 00/17] bcm2835: Treewide switch to SPDX identifier
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v15 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [RFC PATCH] i2c: nvidia-gpu: limit reads also for combined messages
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH] i2c: nvidia-gpu: adhere to I2C fault codes
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH] i2c: nvidia-gpu: make pm_ops static
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC PATCH] i2c: nvidia-gpu: limit reads also for combined messages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: nvidia-gpu: adhere to I2C fault codes
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: nvidia-gpu: make pm_ops static
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 2/3] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v4 1/3] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH v3 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 3/3] MAINTAINERS: Add entry for i2c-omap driver
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 2/3] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v3 0/3] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: switched to resume/suspend callbacks.
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: DFSR settings and the mpc-i2c driver
  • From: Leif Enblom <Leif.Enblom@xxxxxxxxxxx>