Re: [PATCH 4/5] dt-bindings: i2c: Add Mediatek MT8183 i2c binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 3, 2018 at 5:34 AM <qii.wang@xxxxxxxxxxxx> wrote:
>
> From: qii wang <qii.wang@xxxxxxxxxxxx>
>
> Add MT8183 i2c binding to binding file. Compare to 2712 i2c
> controller, MT8183 has different registers, offsets, clock,
> and multi-user function.
>
> Signed-off-by: qii wang <qii.wang@xxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mtk.txt |    7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
> index 7729e57..dfde624 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
> @@ -12,14 +12,15 @@ Required properties:
>        "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
>        "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek mt7629
>        "mediatek,mt8173-i2c": for MediaTek MT8173
> +      "mediatek,mt8183-i2c": for MediaTek MT8183
>    - reg: physical base address of the controller and dma base, length of memory
>      mapped region.
>    - interrupts: interrupt number to the cpu.
>    - clock-div: the fixed value for frequency divider of clock source in i2c
>      module. Each IC may be different.
>    - clocks: clock name from clock manager
> -  - clock-names: Must include "main" and "dma", if enable have-pmic need include
> -    "pmic" extra.
> +  - clock-names: Must include "main" and "dma", "arb" is optional, if enable

if arb is optional, the multi-user function still can work? arb seems
like the clock fed to arbitrating bus when multiple users are
accessing at the same time.

> +    have-pmic need include "pmic" extra.
>
>  Optional properties:
>    - clock-frequency: Frequency in Hz of the bus when transfer, the default value
> @@ -27,6 +28,8 @@ Optional properties:
>    - mediatek,have-pmic: platform can control i2c form special pmic side.
>      Only mt6589 and mt8135 support this feature.
>    - mediatek,use-push-pull: IO config use push-pull mode.
> +  - ch-offset: base reg offset for multi-user.

add a vendor prefix if the property is vendor-specific one.

> +  - mediatek,share-i3c: i3c controller can share i2c function.
>
>  Example:
>
> --
> 1.7.9.5
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux