If the dma controller is not yet probed, defer i2c probe. The error path in probe was slightly modified (no functional change) to avoid triggering this WARN_ON(): "cg-pll0-div1 already disabled WARNING: CPU: 1 PID: 1 at drivers/clk/clk.c:828 clk_core_disable+0xa8/0xb0" Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx> --- drivers/i2c/busses/i2c-imx.c | 45 +++++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index fa9ad53845d9..5a28d25ff9b6 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -273,8 +273,8 @@ static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx, } /* Functions for DMA support */ -static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, - dma_addr_t phy_addr) +static int i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, + dma_addr_t phy_addr) { struct imx_i2c_dma *dma; struct dma_slave_config dma_sconfig; @@ -283,11 +283,12 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); if (!dma) - return; + return -ENOMEM; - dma->chan_tx = dma_request_slave_channel(dev, "tx"); - if (!dma->chan_tx) { - dev_dbg(dev, "can't request DMA tx channel\n"); + dma->chan_tx = dma_request_slave_channel_reason(dev, "tx"); + if (IS_ERR(dma->chan_tx)) { + ret = PTR_ERR(dma->chan_tx); + dma->chan_tx = NULL; goto fail_al; } @@ -301,10 +302,10 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dev_dbg(dev, "can't configure tx channel\n"); goto fail_tx; } - - dma->chan_rx = dma_request_slave_channel(dev, "rx"); - if (!dma->chan_rx) { - dev_dbg(dev, "can't request DMA rx channel\n"); + dma->chan_rx = dma_request_slave_channel_reason(dev, "rx"); + if (IS_ERR(dma->chan_rx)) { + ret = PTR_ERR(dma->chan_rx); + dma->chan_rx = NULL; goto fail_tx; } @@ -324,7 +325,7 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n", dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx)); - return; + return 0; fail_rx: dma_release_channel(dma->chan_rx); @@ -332,7 +333,8 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx, dma_release_channel(dma->chan_tx); fail_al: devm_kfree(dev, dma); - dev_info(dev, "can't use DMA, using PIO instead.\n"); + + return ret; } static void i2c_imx_dma_callback(void *arg) @@ -1106,7 +1108,8 @@ static int i2c_imx_probe(struct platform_device *pdev) pdev->name, i2c_imx); if (ret) { dev_err(&pdev->dev, "can't claim irq %d\n", irq); - goto clk_disable; + clk_disable_unprepare(i2c_imx->clk); + return ret; } /* Init queue */ @@ -1156,17 +1159,25 @@ static int i2c_imx_probe(struct platform_device *pdev) pm_runtime_mark_last_busy(&pdev->dev); pm_runtime_put_autosuspend(&pdev->dev); + /* Init DMA config if supported */ + ret = i2c_imx_dma_request(i2c_imx, phy_addr); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_info(&pdev->dev, "can't use DMA, using PIO instead.\n"); + else + goto del_adapter; + } + dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq); dev_dbg(&i2c_imx->adapter.dev, "device resources: %pR\n", res); dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", i2c_imx->adapter.name); dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); - /* Init DMA config if supported */ - i2c_imx_dma_request(i2c_imx, phy_addr); - return 0; /* Return OK */ +del_adapter: + i2c_del_adapter(&i2c_imx->adapter); clk_notifier_unregister: clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb); rpm_disable: @@ -1175,8 +1186,6 @@ static int i2c_imx_probe(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); -clk_disable: - clk_disable_unprepare(i2c_imx->clk); return ret; } -- 2.17.1