RE: [PATCH V3 2/3] i2c: tegra: Update transfer timeout

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> > Update I2C transfer timeout based on transfer bytes and I2C bus rate 
> > to allow enough time during max transfer size based on the speed.
>
> Could it be that I2C device is busy and just slowly handling the transfer requests? Maybe better to leave the timeout as-is and assume the worst case scenario?
>
This change includes min transfer time out of 100ms in addition to computed timeout based on transfer bytes and speed which can account in cases of slave devices running at slower speed.
Also Tegra I2C Master supports Clock stretching by the slave.

> > 
> > Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> > ---
> >  [V3] : Same as V2
> >  [V2] : Added this patch in V2 series to allow enough time for data transfer
> > 	to happen.
> > 	This patch has dependency with DMA patch as TEGRA_I2C_TIMEOUT define
> > 	takes argument with this patch.
> > 
> >  drivers/i2c/busses/i2c-tegra.c | 18 ++++++++++++++++--
> >  1 file changed, 16 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-tegra.c 
> > b/drivers/i2c/busses/i2c-tegra.c index aec500ef9a98..3dcbc9960d9d 
> > 100644
> > --- a/drivers/i2c/busses/i2c-tegra.c
> > +++ b/drivers/i2c/busses/i2c-tegra.c
> > @@ -23,7 +23,7 @@
> >  #include <linux/reset.h>
> >  #include <linux/slab.h>
> >  
> > -#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
> > +#define TEGRA_I2C_TIMEOUT(ms) (msecs_to_jiffies(ms))
> >  #define BYTES_PER_FIFO_WORD 4
> >  
> >  #define I2C_CNFG				0x000
> > @@ -116,6 +116,9 @@
> >  #define I2C_MST_FIFO_STATUS_TX_MASK		0xff0000
> >  #define I2C_MST_FIFO_STATUS_TX_SHIFT		16
> >  
> > +/* Packet header size in bytes */
> > +#define I2C_PACKET_HEADER_SIZE			12
> > +
> >  /*
> >   * msg_end_type: The bus control which need to be send at end of transfer.
> >   * @MSG_END_STOP: Send stop pulse at end of transfer.
> > @@ -683,6 +686,17 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> >  	u32 int_mask;
> >  	unsigned long time_left;
> >  	unsigned long flags;
> > +	u16 xfer_time = 100;
> > +	size_t xfer_size = 0;
>
> No need to initialize xfer_size to 0.
>
> > +
> > +	if (msg->flags & I2C_M_RD)
> > +		xfer_size = ALIGN(msg->len, BYTES_PER_FIFO_WORD);
> > +	else
> > +		xfer_size = ALIGN(msg->len, BYTES_PER_FIFO_WORD) +
> > +			    I2C_PACKET_HEADER_SIZE;
> > +
> > +	xfer_time += DIV_ROUND_CLOSEST((xfer_size * 9) * 1000,
> > +					i2c_dev->bus_clk_rate);>
> >  	tegra_i2c_flush_fifos(i2c_dev);
> >  
> > @@ -739,7 +753,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> >  		i2c_readl(i2c_dev, I2C_INT_MASK));
> >  
> >  	time_left = wait_for_completion_timeout(&i2c_dev->msg_complete,
> > -						TEGRA_I2C_TIMEOUT);
> > +						TEGRA_I2C_TIMEOUT(xfer_time));
> >  	tegra_i2c_mask_irq(i2c_dev, int_mask);
> >  
> >  	if (time_left == 0) {
> > 




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux