Linux Kernel I2C

• Thread Index

• Re: [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: switched to resume/suspend callbacks.
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: DFSR settings and the mpc-i2c driver
  • From: Leif Enblom <Leif.Enblom@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH v3] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: DFSR settings and the mpc-i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v2] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH v2] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: 4.14/4.18: Please add "eeprom: at24: Add support for address-width property"
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] drm/bridge/sii902x: Fix EDID readback
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• [PATCH v2] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: 4.14/4.18: Please add "eeprom: at24: Add support for address-width property"
  • From: "Yeh, Andy" <andy.yeh@xxxxxxxxx>
• DFSR settings and the mpc-i2c driver
  • From: Leif Enblom <Leif.Enblom@xxxxxxxxxxx>
• Re: [PATCH v7] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH v8] i2c: Add driver for the AMD PCIe MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v1 3/3] i2c: imx: don't print error if DMA is not configured
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: imx: add workaround for erratum ERR010027
  • From: ying.zhang22455@xxxxxxx
• Re: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: i2c-qcom-geni: Fix runtime PM mismatch with child devices
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH 1/2] i2c: i2c-mlx: I2C SMBus driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• [PATCH 0/2] i2c: added driver for Mellanox BlueField SoC
  • From: Khalil Blaiech <kblaiech@xxxxxxxxxxxx>
• RE: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v15 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: fix some typo
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: rk3x: fix some typo
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH] i2c: aspeed: Fix an incorrect error log printing
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix some typo
  • From: Frank Lee <tiny.windzz@xxxxxxxxx>
• Re: [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix some typo
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] i2c: rk3x: fix some typo
  • From: Yangtao Li <tiny.windzz@xxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] eeprom: at24: Add 24c2048
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add maintainer for IMX LPI2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Remove unnecessary call to irq_find_mapping
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: 4.14/4.18: Please add "eeprom: at24: Add support for address-width property"
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [PATCH v3] eeprom: at24: Add 24c2048
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: 4.14/4.18: Please add "eeprom: at24: Add support for address-width property"
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [RFC] drm/bridge/sii902x: Fix EDID readback
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Tobias Thomer <thomer.tobias@xxxxxxxxx>
• [PATCH i2c-next v9 2/5] i2c: core: Add support reading of 'bus-timeout-ms' and '#retries' properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v9 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v9 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v9 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v9 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v7] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v10 4/9] dt-bindings: i3c: Document core bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] More ACPI updates for v4.20-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: add maintainer for IMX LPI2C driver
  • From: "A.s. Dong" <aisheng.dong@xxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: "A.s. Dong" <aisheng.dong@xxxxxxx>
• RE: [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: "A.s. Dong" <aisheng.dong@xxxxxxx>
• Re: [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: "A.s. Dong" <aisheng.dong@xxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] More ACPI updates for v4.20-rc1
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH i2c-next v8 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH i2c-next v8 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.20
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 2/5] i2c: core: Add support reading of 'bus-timeout-ms' and '#retries' properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v8 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH V2 5/5] i2c:ocores: checkpatch fixes
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• [PATCH V2 2/5] i2c:ocores: do not handle IRQ if IF is not set
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• [PATCH V2 4/5] i2c:ocores: add SPDX tag
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• [PATCH V2 3/5] i2c:ocores: add polling interface
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• [PATCH V2 1/5] i2c:ocores: stop transfer on timeout
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• [PATCH V2 0/5] i2c:ocores: improvements
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [RESEND PATCH 1/2] i2c: enable buses to save their clock frequency in adapter
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c:ocores: do not handle IRQ if IF is not set
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Remove unnecessary call to irq_find_mapping
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add myself as the dw-i3c-master module maintainer
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 1/3] i3c: master: Add driver for Synopsys DesignWare IP
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 0/3] Add driver for Synopsys DesignWare I3C master IP
  • From: Vitor soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v1 3/3] i2c: imx: don't print error if DMA is not configured
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c:ocores: do not handle IRQ if IF is not set
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH v1 3/3] i2c: imx: don't print error if DMA is not configured
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Remove unnecessary call to irq_find_mapping
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add maintainer for Renesas I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: sh_mobile: Remove dummy runtime PM callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] i2c: imx: don't print error if DMA is not configured
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: uniphier-f: fix race condition when IRQ is cleared
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: uniphier-f: fix occasional timeout error
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: uniphier-f: make driver robust against concurrency
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.20-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v7] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• [PATCH] MAINTAINERS: add maintainer for Renesas I2C driver
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [PATCH 1/3] i2c:ocores: stop transfer on timeout
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• [PATCH v15 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH v15 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH v15 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v6] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v10 0/9] Add the I3C subsystem
  • From: vitor <vitor.soares@xxxxxxxxxxxx>
• [PATCH v10 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 2/9] docs: driver-api: Add I3C documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 5/9] MAINTAINERS: Add myself as the I3C subsystem maintainer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 3/9] i3c: Add sysfs ABI spec
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 4/9] dt-bindings: i3c: Document core bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 7/9] dt-bindings: i3c: Document Cadence I3C master bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 8/9] gpio: Add a driver for Cadence I3C GPIO expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 1/9] i3c: Add core I3C infrastructure
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v10 9/9] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v14 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [v5] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Kai Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• RE: [PATCH 3/3] usb: renesas_usbhs: Remove dummy runtime PM callbacks
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 3/3] usb: renesas_usbhs: Remove dummy runtime PM callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] net: ethernet: Remove dummy runtime PM callbacks from Renesas drivers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v14 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: <ajayg@xxxxxxxxxx>
• [PATCH v14 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: <ajayg@xxxxxxxxxx>
• [PATCH v14 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: <ajayg@xxxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH 1/3] i2c:ocores: stop transfer on timeout
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• RE: [PATCH 3/3] usb: renesas_usbhs: Remove dummy runtime PM callbacks
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 0/3] PM: Renesas: Remove dummy runtime PM callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c:amd I2C Driver based on PCI Interface for upcoming, platform
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c:amd I2C Driver based on PCI Interface for upcoming, platform
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH 2/3] net: ethernet: Remove dummy runtime PM callbacks from Renesas drivers
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v3] i2c:amd I2C Driver based on PCI Interface for upcoming, platform
  • From: Kai Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [v5] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH 1/3] i2c:ocores: stop transfer on timeout
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH 0/3] PM: Renesas: Remove dummy runtime PM callbacks
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/3] net: ethernet: Remove dummy runtime PM callbacks from Renesas drivers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 3/3] usb: renesas_usbhs: Remove dummy runtime PM callbacks
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: sh_mobile: Remove dummy runtime PM callbacks
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 0/3] PM: Renesas: Remove dummy runtime PM callbacks
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Implement timeout
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• [PATCH] i2c: cadence: Implement timeout
  • From: <shubhrajyoti.datta@xxxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add 24c2048
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Federico Vaga <federico.vaga@xxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [v4] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add 24c2048
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [v4] i2c: Add PCI and platform drivers for the AMD MP2 I2C controller
  • From: Elie Morisse <syniurge@xxxxxxxxx>
• Re: [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [RESEND PATCH 1/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [RESEND PATCH 2/2] i2c: at91: Save the bus clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [RESEND PATCH 0/2] i2c: enable buses to save their clock frequency in adapter
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add 24c2048
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v9 4/9] dt-bindings: i3c: Document core bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v2] eeprom: at24: Add 24c2048
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• [PATCH v9 9/9] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 5/9] MAINTAINERS: Add myself as the I3C subsystem maintainer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 7/9] dt-bindings: i3c: Document Cadence I3C master bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 1/9] i3c: Add core I3C infrastructure
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 8/9] gpio: Add a driver for Cadence I3C GPIO expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 4/9] dt-bindings: i3c: Document core bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 3/9] i3c: Add sysfs ABI spec
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 6/9] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 2/9] docs: driver-api: Add I3C documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v9 0/9] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Add 24c2048
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] i2c: at91: switched to resume/suspend callbacks.
  • From: <Andrei.Stefanescu@xxxxxxxxxxxxx>
• 4.14/4.18: Please add "eeprom: at24: Add support for address-width property"
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.19
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:ocores: add polling interface
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c:ocores: do not handle IRQ if IF is not set
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c:ocores: stop transfer on timeout
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• [PULL REQUEST] i2c for 4.19
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] eeprom: at24: Add 24c2048
  • From: Adrian Bunk <bunk@xxxxxxxxxx>
• Re: [PATCH] i2c: rcar: cleanup DMA for all kinds of failure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for Broadcom STB I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] i2c: rcar: cleanup DMA for all kinds of failure
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] i2c: qup: Use the interconnect API
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: imx: probe dma only only on i.MX50 and later.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: imx: probe dma only only on i.MX50 and later.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: imx: probe dma only only on i.MX50 and later.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: Clear client->irq in i2c_device_remove
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: Remove unnecessary call to irq_find_mapping
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: imx: probe dma only only on i.MX50 and later.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/3] ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH V3 4/8] dt-bindings: i2c: i2c-imx-lpi2c: add imx8qxp compatible string
  • From: "A.s. Dong" <aisheng.dong@xxxxxxx>
• Re: [PATCH v2] hwmon: (sht3x) add devicetree support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (sht3x) add devicetree support
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2] hwmon: (sht3x) add devicetree support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 1/3] ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 0/3] i2c: imx: DMA related fixes
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 2/3] i2c: imx: probe dma only only on i.MX50 and later.
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 3/3] i2c: imx: don't print error if DMA is not configured
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] i2c: core: introduce master_xfer_irqless callback
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
  • From: Keerthy <j-keerthy@xxxxxx>
• [RFC PATCH] i2c: busses: omap: Add the master_xfer_irqless hook
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: designware: Cleanup bus lock handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: designware: Cleanup bus lock handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v1] i2c: tegra: Remove suspend-resume
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v1] i2c: tegra: Remove suspend-resume
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• RE: Delay between stop condition and start condition
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for Broadcom STB I2C controller
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add entry for Broadcom STB I2C controller
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH v1] i2c: tegra: Remove suspend-resume
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: Delay between stop condition and start condition
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: tegra: Remove suspend-resume
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v8 00/10] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: Delay between stop condition and start condition
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Delay between stop condition and start condition
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v13 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: uniphier-f: fix race condition when IRQ is cleared
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 1/3] i2c: uniphier-f: make driver robust against concurrency
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 0/3] i2c: uniphier-f: fix concurrency issues and race conditions
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH 2/3] i2c: uniphier-f: fix occasional timeout error
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: designware: Cleanup bus lock handling
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Delay between stop condition and start condition
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: Using polling mode for CCI driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Using polling mode for CCI driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: Using polling mode for CCI driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Using polling mode for CCI driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.19
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.19
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v13 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c-mux for 4.20-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v7 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH i2c-next v7 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i2c-qcom-geni: Simplify irq handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Fix kerneldoc for renamed i2c dma put function
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/3] ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 3/3] i2c: designware: Cleanup bus lock handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 0/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC semaphore handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Ingo Molnar <mingo@xxxxxxxxxx>
• [PATCH v2 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/3] ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/3] i2c: designware: Cleanup bus lock handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC semaphore handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/2] treewide: use bus_find_device_by_fwnode
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• Re: [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v7 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v7 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Using polling mode for CCI driver
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 2/2] treewide: use bus_find_device_by_fwnode
  • From: Silesh C V <svellattu@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Silesh C V <svellattu@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Silesh C V <svellattu@xxxxxxxxxx>
• Re: [PATCH i2c-next v7 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH i2c-next v7 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v3 2/2] treewide: use bus_find_device_by_fwnode
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v3 2/2] treewide: use bus_find_device_by_fwnode
  • From: Silesh C V <svellattu@xxxxxxxxxx>
• [PATCH v3 1/2] Driver core: add bus_find_device_by_fwnode
  • From: Silesh C V <svellattu@xxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: mux: pca954x: simplify code to reach the adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: Fix kerneldoc for renamed i2c dma put function
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v8 07/10] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rcar: refactor private flags
  • From: Eugeniu Rosca <roscaeugeniu@xxxxxxxxx>
• Re: [PATCH v8 00/10] Add the I3C subsystem
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v8 07/10] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v8 07/10] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC PATCH 2/3] watchdog: da9062: avoid regmap in restart handler
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 07/10] i3c: master: Add driver for Cadence IP
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH 1/3] i2c: imx: implement master_xfer_irqless callback
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH RESEND] eeprom: New ee1004 driver for DDR4 memory
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [RFC PATCH 3/3] ARM: dts: phyboard-mira-dl: rely on PMIC for reboot and watchdog
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• [RFC PATCH 2/3] watchdog: da9062: avoid regmap in restart handler
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• [RFC PATCH 1/3] i2c: imx: implement master_xfer_irqless callback
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH 0/3] i2c: core: introduce master_xfer_irqless
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for 4.19
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.19
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH i2c-next v7 2/5] i2c: core: Add support reading of 'bus-timeout-ms' and '#retries' properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v7 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v7 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v7 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v7 3/5] dt-bindings: i2c: aspeed: Add 'bus-timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v7 1/5] dt-bindings: i2c: Add 'bus-timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: squelch error: uninitialized symbol 'ret'
  • From: "George G. Davis" <ggdavisiv@xxxxxxxxx>
• Re: [PATCH i2c-next v6 1/5] dt-bindings: i2c: Add 'timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v6 1/5] dt-bindings: i2c: Add 'timeout-ms' and '#retries' properties as common optional
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: core: squelch error: uninitialized symbol 'ret'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: squelch error: uninitialized symbol 'ret'
  • From: "George G. Davis" <ggdavisiv@xxxxxxxxx>
• Re: [PATCH] i2c: core: squelch error: uninitialized symbol 'ret'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rcar: refactor private flags
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 1/4] i2c: core: remove outdated DEBUG output
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: core: squelch error: uninitialized symbol 'ret'
  • From: "George G. Davis" <ggdavisiv@xxxxxxxxx>
• Re: [RFC PATCH 2/4] i2c: core: remove level of indentation in i2c_transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 09/12] i2c: zx2967: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 06/12] i2c: qup: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/12] i2c: qup: use core to detect 'no zero length' quirk
  • From: Andy Gross <andy.gross@xxxxxxxxxx>
• Re: [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 09/12] i2c: zx2967: use core to detect 'no zero length' quirk
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [GIT PULL] at24 updates for 4.20
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 09/12] i2c: zx2967: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 08/12] i2c: tegra: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 06/12] i2c: qup: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 04/12] i2c: omap: use core to detect 'no zero length' quirk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [GIT PULL] at24 updates for 4.20
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: Convert to using %pOFn instead of device_node.name
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: mux: mlxcpld: simplify code to reach the adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: mux: ltc4306: simplify code to reach the adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: mux: pca954x: simplify code to reach the adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH i2c-next v6 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v6 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v6 2/5] i2c: Add support reading of 'timeout-ms' and '#retries' properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v6 3/5] dt-bindings: i2c: aspeed: Add 'timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v6 1/5] dt-bindings: i2c: Add 'timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v6 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v5 2/5] i2c: Add support for 'timeout-ms' and '#retries' OF properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v5 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rcar: refactor private flags
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Sowmini Varadhan <sowmini.varadhan@xxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v8 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH i2c-next v5 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i2c-qcom-geni: Simplify irq handler
  • From: alokc@xxxxxxxxxxxxxx
• Re: [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: alokc@xxxxxxxxxxxxxx
• [PATCH i2c-next v5 0/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v5 1/5] dt-bindings: i2c: Add 'timeout-ms' and '#retries' properties as common optional
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v5 2/5] i2c: Add support for 'timeout-ms' and '#retries' OF properties
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v5 3/5] dt-bindings: i2c: aspeed: Add 'timeout-ms' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v5 4/5] i2c: aspeed: Remove hard-coded bus timeout value setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v5 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v13 2/2] usb: typec: ucsi: add support for Cypress CCGx
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH v13 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [PATCH v13 0/2] Add support for USB Type-C interface on latest NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH i2c-next v4 2/3] i2c: aspeed: Add 'timeout' DT property reading code
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c: mux: ltc4306: simplify code to reach the adapter
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• [PATCH v2 3/3] i2c: mux: mlxcpld: simplify code to reach the adapter
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• [PATCH v2 1/3] i2c: mux: pca954x: simplify code to reach the adapter
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• [PATCH v3] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• [PATCH v8 00/10] Add the I3C subsystem
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 02/10] docs: driver-api: Add I3C documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 04/10] dt-bindings: i3c: Document core bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 05/10] dt-bindings: i3c: Add macros to help fill I3C/I2C device's reg property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 06/10] MAINTAINERS: Add myself as the I3C subsystem maintainer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 08/10] dt-bindings: i3c: Document Cadence I3C master bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 09/10] gpio: Add a driver for Cadence I3C GPIO expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 07/10] i3c: master: Add driver for Cadence IP
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 10/10] dt-bindings: gpio: Add bindings for Cadence I3C gpio expander
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 01/10] i3c: Add core I3C infrastructure
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v8 03/10] i3c: Add sysfs ABI spec
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH i2c-next v4 2/3] i2c: aspeed: Add 'timeout' DT property reading code
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] eeprom: New ee1004 driver for DDR4 memory
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• [GIT PULL] at24 updates for 4.20
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] i2c: of: Try to find an I2C adapter matching the parent
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] eeprom: New ee1004 driver for DDR4 memory
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c: reject transfers when adapter is suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• RE: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [RFC] i2c: reject transfers when adapter is suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [RFC] i2c: reject transfers when adapter is suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH i2c-next v4 1/3] dt-bindings: i2c: aspeed: Add 'timeout' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v4 2/3] i2c: aspeed: Add 'timeout' DT property reading code
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v4 3/3] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v4 0/3] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v12 1/2] i2c: buses: add i2c bus driver for NVIDIA GPU
  • From: Ajay Gupta <ajayg@xxxxxxxxxx>
• Re: [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RFC] i2c: reject transfers when adapter is suspended
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v4.14-ltsi] eeprom: at24: Add OF device ID table
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2] i2c: mux: remove duplicated i2c_algorithm
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: mux: pca954x: simplify code to reach the adapter
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: designware: Call i2c_dw_clk_rate() only when calculating timings
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: i2c-designware regression
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-scmi: fix for i2c_smbus_write_block_data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: of: Try to find an I2C adapter matching the parent
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c: sh_mobile: Document r8a7744 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: i2c: rcar: Document r8a7744 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• i2c-designware regression
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: support MAX735x family multiplexors
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: Convert to using %pOFn instead of device_node.name
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: brcmstb: Allow enabling the driver on DSL SoCs
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 2/2] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH i2c-next v3 1/3] dt-bindings: i2c: aspeed: Add 'timeout' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-next v3 1/3] dt-bindings: i2c: aspeed: Add 'timeout' property as an optional property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: omap: Use noirq system sleep pm ops to idle device for suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH i2c-next v3 2/3] i2c: aspeed: Add 'aspeed,timeout' DT property reading code
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• Re: [PATCH 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH] i2c: i2c-scmi: fix for i2c_smbus_write_block_data
  • From: Viktor Krasnov <vkrasnov@xxxxxxxxxxxxx>
• Re: [PATCH i2c-next v3 2/3] i2c: aspeed: Add 'aspeed,timeout' DT property reading code
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH i2c-next v3 3/3] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v3 2/3] i2c: aspeed: Add 'aspeed,timeout' DT property reading code
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v3 1/3] dt-bindings: i2c: aspeed: Add 'timeout' property as an optional property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v3 0/3] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: of: Try to find an I2C adapter matching the parent
  • From: Vlado Plaga <rechner@xxxxxxxxxxx>
• Re: [PATCH] i2c: mux: remove duplicated i2c_algorithm
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 6/6] i2c: at91: Convert to use struct i2c_timings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 6/6] i2c: at91: Convert to use struct i2c_timings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c-omap: Add new compatible for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 0/2] i2c-omap: Enable i2c-omap driver for AM654 SoCs
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/2] i2c: busses: Kconfig: Enable I2C_OMAP for ARCH_K3
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH] i2c: mux: remove duplicated i2c_algorithm
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• [PATCH RESEND] i2c: mux: pca954x: simplify code to reach the adapter
  • From: Luca Ceresoli <lucaceresoli77@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: i2c-qcom-geni: Simplify irq handler
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH] i2c: of: Try to find an I2C adapter matching the parent
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Fix unexpected timeout under high load
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] ACPI / LPSS: Only add device links from consumer to supplier
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v3 3/3] i2c: i2c-qcom-geni: Simplify irq handler
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH v3 0/3] Fix qcom geni i2c DMA handling
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH i2c-next v2 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' property
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v2 2/2] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH i2c-next v2 0/2] i2c: aspeed: Add bus idle waiting logic for multi-master use cases
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: i2c-qcom-geni: Properly handle DMA safe buffers
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Remove label only used when CONFIG_I2C_SLAVE=y
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH i2c-next 1/2] dt-bindings: i2c: aspeed: Add 'idle-wait-timeout-ms' setting
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: use proper annotation for "fall through"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Acknowledge most interrupts early in interrupt handler
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c: i2c-isch: fix spelling mistake "unitialized" -> "uninitialized"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• RE: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: r8a77470: Add I2C4 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: r8a77470: Add I2C4 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c: sh_mobile: Document r8a7744 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: i2c: rcar: Document r8a7744 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: r8a77470: Add I2C4 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c: sh_mobile: Document r8a7744 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: i2c: rcar: Document r8a7744 support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH 1/2] gpiolib: Fix missing updates of bitmap index
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH 2/2] gpiolib: Fix array members of same chip processed separately
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• [PATCH 2/3] ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/3] i2c: designware: Cleanup bus lock handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC bus semaphore code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/3] x86: baytrail/cherrytrail: Rework and move P-Unit PMIC semaphore handling
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 6/7] ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 5/7] ACPI / LPSS: Add a device link from the GPU to the BYT I2C5 controller
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 4/7] ACPI / LPSS: Add a device link from the GPU to the CHT I2C7 controller
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/7] ACPI / LPSS: Make acpi_lpss_find_device() also find PCI devices
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/7] ACPI / LPSS: Make hid_uid_match helper accept a NULL uid argument
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/7] ACPI / LPSS: Make hid_uid_match helper take an acpi_device as first argument
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/7] Resume BYT/CHT LPSS I2C controller before the iGPU
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Qualcomm CCI I2C driver
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 4/4] ARM: dts: r8a77470: Add I2C4 support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v4] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH v3] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fixed invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH v2] i2c: aspeed: fix invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: fixed invalid clock parameters for very large divisors
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: r8a77470: Add I2C4 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: i2c: sh_mobile: Document r8a7744 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: i2c: rcar: Document r8a7744 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: rcar: Add r8a77470 support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• [PATCH 0/4] Add RZ/G1C and RZ/G1N I2C related support
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Qualcomm CCI I2C driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Qualcomm CCI I2C driver
  • From: Vinod <vkoul@xxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• Re: [PATCH 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/7] ACPI / LPSS: Only add device links from consumer to supplier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: better error description for stuck slaves
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH 1/7] ACPI / LPSS: Only add device links from consumer to supplier
  • From: Adrian Hunter <adrian.hunter@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 7/7] i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array
  • From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
• [PATCH] i2c: aspeed: fixed invalid clock parameters for very large divisors
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] i2c: core: introduce master_xfer_irqless callback
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 3/4] i2c: core: use I2C locking behaviour also for SMBUS
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/4] i2c: core: remove level of indentation in i2c_transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [RFC PATCH 0/4] i2c: core: introduce master_xfer_irqless
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: i2c-qcom-geni: Simplify tx/rx functions
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: i2c-qcom-geni: Properly handle DMA safe buffers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Qualcomm CCI I2C driver
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH] i2c-qcom-cci: Recover from errors
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [RFC] i2c: qup: Use the interconnect API
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>