Re: [PATCH v3] eeprom: at24: Add 24c2048

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



śr., 31 paź 2018 o 21:49 Adrian Bunk <bunk@xxxxxxxxxx> napisał(a):
>
> Works with an ST M24M02.
>
> Signed-off-by: Adrian Bunk <bunk@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/eeprom/at24.txt | 1 +
>  drivers/misc/eeprom/Kconfig                       | 2 +-
>  drivers/misc/eeprom/at24.c                        | 3 +++
>  3 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
> index aededdbc262b..f9a7c984274c 100644
> --- a/Documentation/devicetree/bindings/eeprom/at24.txt
> +++ b/Documentation/devicetree/bindings/eeprom/at24.txt
> @@ -27,6 +27,7 @@ Required properties:
>                  "atmel,24c256",
>                  "atmel,24c512",
>                  "atmel,24c1024",
> +                "atmel,24c2048",
>
>                  If <manufacturer> is not "atmel", then a fallback must be used
>                  with the same <model> and "atmel" as manufacturer.
> diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
> index 68a1ac929917..d382b13c27dd 100644
> --- a/drivers/misc/eeprom/Kconfig
> +++ b/drivers/misc/eeprom/Kconfig
> @@ -13,7 +13,7 @@ config EEPROM_AT24
>           ones like at24c64, 24lc02 or fm24c04:
>
>              24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
> -            24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
> +            24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024, 24c2048
>
>           Unless you like data loss puzzles, always be sure that any chip
>           you configure as a 24c32 (32 kbit) or larger is NOT really a
> diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> index 7e50e1d6f58c..94836fcbe721 100644
> --- a/drivers/misc/eeprom/at24.c
> +++ b/drivers/misc/eeprom/at24.c
> @@ -173,6 +173,7 @@ AT24_CHIP_DATA(at24_data_24c128, 131072 / 8, AT24_FLAG_ADDR16);
>  AT24_CHIP_DATA(at24_data_24c256, 262144 / 8, AT24_FLAG_ADDR16);
>  AT24_CHIP_DATA(at24_data_24c512, 524288 / 8, AT24_FLAG_ADDR16);
>  AT24_CHIP_DATA(at24_data_24c1024, 1048576 / 8, AT24_FLAG_ADDR16);
> +AT24_CHIP_DATA(at24_data_24c2048, 2097152 / 8, AT24_FLAG_ADDR16);
>  /* identical to 24c08 ? */
>  AT24_CHIP_DATA(at24_data_INT3499, 8192 / 8, 0);
>
> @@ -199,6 +200,7 @@ static const struct i2c_device_id at24_ids[] = {
>         { "24c256",     (kernel_ulong_t)&at24_data_24c256 },
>         { "24c512",     (kernel_ulong_t)&at24_data_24c512 },
>         { "24c1024",    (kernel_ulong_t)&at24_data_24c1024 },
> +       { "24c2048",    (kernel_ulong_t)&at24_data_24c2048 },
>         { "at24",       0 },
>         { /* END OF LIST */ }
>  };
> @@ -227,6 +229,7 @@ static const struct of_device_id at24_of_match[] = {
>         { .compatible = "atmel,24c256",         .data = &at24_data_24c256 },
>         { .compatible = "atmel,24c512",         .data = &at24_data_24c512 },
>         { .compatible = "atmel,24c1024",        .data = &at24_data_24c1024 },
> +       { .compatible = "atmel,24c2048",        .data = &at24_data_24c2048 },
>         { /* END OF LIST */ },
>  };
>  MODULE_DEVICE_TABLE(of, at24_of_match);
> --
> 2.11.0
>

This patch doesn't even apply to current master, but first off: send
the DT and code changes as separate patches.

Bart




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux