[PATCH] i2c: rcar: cleanup DMA for all kinds of failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



DMA needs to be cleaned up not only on timeout, but on all errors where
it has been setup before.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---

Reported and tested by the BSP team.

 drivers/i2c/busses/i2c-rcar.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 52cf42b32f0a..4aa7dde876f3 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -806,8 +806,12 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 
 	time_left = wait_event_timeout(priv->wait, priv->flags & ID_DONE,
 				     num * adap->timeout);
-	if (!time_left) {
+
+	/* cleanup DMA if it couldn't complete properly due to an error */
+	if (priv->dma_direction != DMA_NONE)
 		rcar_i2c_cleanup_dma(priv);
+
+	if (!time_left) {
 		rcar_i2c_init(priv);
 		ret = -ETIMEDOUT;
 	} else if (priv->flags & ID_NACK) {
-- 
2.19.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux