Linux Kernel I2C

• Thread Index

• [PATCH 1/2] i2c: cadence: Allow to specify the FIFO depth and maximum transfer length
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, Extcon and I2C due for the v6.3 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 resend 3/3] extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90F
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 resend 2/3] i2c: cht-wc: Add charger-chip info for the Lenovo Yoga Tab 3 YT3-X90F
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 resend 1/3] mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Tab 3 X90F to intel_cht_wc_models
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  • From: Guru Das Srinagesh <quic_gurus@xxxxxxxxxxx>
• [PATCH] soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for the Loongson LS2X I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 6/9] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 5/9] i2c: xiic: Add smbus_block_read functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 4/9] i2c: xiic: Add wait for FIFO empty in send_tx
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 3/9] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 2/9] i2c: xiic: Fix Rx and Tx paths in standard mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 1/9] i2c: xiic: Add standard mode support for > 255 byte
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: remove arch/sh
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH V11 2/3] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: remove arch/sh
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Add entry for the Loongson LS2X I2C driver
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: remove arch/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: remove arch/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 11/35 v2] Documentation: i2c: correct spelling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V11 2/3] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V11 1/3] dt-bindings: i2c: Add Loongson LS2X I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 7/9] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH V4 9/9] i2c: xiic: Add SCL frequency configuration support
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 8/9] i2c: xiic: Update compatible with new IP version
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 6/9] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 5/9] i2c: xiic: Add smbus_block_read functionality
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 7/9] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 4/9] i2c: xiic: Add wait for FIFO empty in send_tx
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 3/9] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 2/9] i2c: xiic: Fix Rx and Tx paths in standard mode
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 1/9] i2c: xiic: Add standard mode support for > 255 byte
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V4 0/9] Added Standard mode and SMBus support.
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• Re: [PATCH 496/606] mtd: maps: pismo: Convert to i2c's .probe_new()
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH 596/606] watchdog: ziirave_wdt: Convert to i2c's .probe_new()
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• [PATCH AUTOSEL 5.4 3/4] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/6] i2c: mxs: suppress probe-deferral error message
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 3/4] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 4/6] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 07/12] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 02/12] i2c: mxs: suppress probe-deferral error message
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 01/12] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 09/20] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 02/20] i2c: mxs: suppress probe-deferral error message
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 01/20] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH V11 1/3] dt-bindings: i2c: Add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V11 2/3] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V11 3/3] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V11 0/3] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Use devm_platform_get_and_ioremap_resource()
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH 2/2] i2c: core: extend use case for dflt addr in i2c_new_ancillary_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] i2c: core: add devm_i2c_new_ancillary_device()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/2] i2c: core: add devm_i2c_new_ancillary_device()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 2/2] i2c: imx-lpi2c: check only for enabled interrupt flags
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: imx-lpi2c: clean rx/tx buffers upon new message
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH V10 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V10 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 11/35 v2] Documentation: i2c: correct spelling
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: add a new bit check for IC_CON control
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 5/5] MAINTAINERS: Add HPE GXP I2C Support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] dt-bindings: bus: add STM32 System Bus
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: (subset) [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] i2c: xiic: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH 11/35] Documentation: i2c: correct spelling
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.2-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-6.2-rc6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v3 0/6] Introduce STM32 system bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 6/6] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 3/6] dt-bindings: bus: add STM32 System Bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: Document common device controller bindings
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: treewide: add feature-domains description in binding files
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v3 4/6] bus: stm32_sys_bus: add support for STM32MP15 and STM32MP13 system bus
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Bryan O'Donoghue" <pure.logic@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 596/606] watchdog: ziirave_wdt: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 11/35] Documentation: i2c: correct spelling
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 11/35] Documentation: i2c: correct spelling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 00/35] Documentation: correct lots of spelling errors (series 1)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 11/35] Documentation: i2c: correct spelling
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• AW: #Extern_Re: question about devicetree entry pca954x
  • From: <RRademacher@xxxxxxxxx>
• AW: #Extern_Re: question about devicetree entry pca954x
  • From: <RRademacher@xxxxxxxxx>
• Re: question about devicetree entry pca954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 resend 1/3] mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Tab 3 X90F to intel_cht_wc_models
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 3/3] extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 2/3] i2c: cht-wc: Add charger-chip info for the Lenovo Yoga Tab 3 YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 resend 0/3] mfd: intel_soc_pmic_chtwc + cell drivers Lenovo Yoga Tab 3 YT3-X90F support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 4/5] ARM: multi_v7_defconfig: add gxp i2c module
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 0/5] ARM: Add GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 5/5] MAINTAINERS: Add HPE GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 3/5] ARM: dts: hpe: Add I2C Topology
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH resend 0/2] i2c/extcon: intel-cht-wc: Lenovo Yoga Tab 3 Pro YT3-X90F support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH resend 0/2] i2c/extcon: intel-cht-wc: Lenovo Yoga Tab 3 Pro YT3-X90F support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH resend 0/2] i2c/extcon: intel-cht-wc: Lenovo Yoga Tab 3 Pro YT3-X90F support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH resend 2/2] extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 0/2] i2c/extcon: intel-cht-wc: Lenovo Yoga Tab 3 Pro YT3-X90F support
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend 1/2] i2c: cht-wc: Add charger-chip info for the Lenovo Yoga Tab 3 YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: add a new bit check for IC_CON control
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v1] i2c: designware: Change from u32 to unsigned int for regmap_read() calls
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH V3 7/9] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v4] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v3] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH V3 9/9] i2c: xiic: Add SCL frequency configuration support
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 8/9] i2c: xiic: Update compatible with new IP version
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 7/9] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 6/9] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 5/9] i2c: xiic: Add smbus_block_read functionality
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 4/9] i2c: xiic: Add wait for FIFO empty in send_tx
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 3/9] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 2/9] i2c: xiic: Fix Rx and Tx paths in standard mode
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 1/9] i2c: xiic: Add standard mode support for > 255 byte
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH V3 0/9] Added Standard mode and SMBus support.
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• Re: [PATCH v5 3/3] i2c: gpio: support write-only sda/scl w/o pull-up
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document SM6350 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• Re: [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v3 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH v3 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 RESEND] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• Re: [PATCH v3 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 001/606] tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• [PATCH v3 3/5] ARM: dts: hpe: Add I2C Topology
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 4/5] ARM: multi_v7_defconfig: add gxp i2c module
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 0/5] ARM: Add GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v3 5/5] MAINTAINERS: Add HPE GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 7/7] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 4/7] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 6/7] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 2/7] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 3/7] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v8 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: qcom: sm6350: Add CCI nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: qcom: sm6350: Add CCI nodes
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document SM6350 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 0/4] Add CCI bus support for SM6350
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sm6350: Add CCI nodes
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom-cci: Document SM6350 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: qcom-cci: Document SM6350 compatible
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: sm6350: Add camera clock controller
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sm6350: Add CCI nodes
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• [PATCH 0/4] Add CCI bus support for SM6350
  • From: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/3] i2c: gpio: support write-only sda
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-mt65xx: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 7/7] media: i2c: add DS90UB953 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: axxia: use 'struct' for kernel-doc notation
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V10 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V10 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 6/7] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: cadence: Remove redundant expression in if clause
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: cadence: Remove `irq` field from driver state struct
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/5] i2c: cadence: Remove unused CDNS_I2C_DATA_INTR_DEPTH define
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/2] pinctrl: Add an API to get the pinctrl pins if initialized
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH v2 1/2] dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 7/7] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: Add GXP I2C Support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Use devm_platform_get_and_ioremap_resource()
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH v7 7/7] media: i2c: add DS90UB953 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/7] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Use devm_platform_get_and_ioremap_resource()
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: mediatek: add i2c support for mt8365 SoC
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v2 3/3] arm64: dts: mediatek: enable i2c0 for mt8365-evk board
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v2 0/3] Add MediaTek MT8365 I2C support
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/5] ARM: Add GXP I2C Support
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• Re: [PATCH] i2c: i2c-mt65xx: Use devm_platform_get_and_ioremap_resource()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH] i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: i2c-mt65xx: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: bcm2835: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: au1550: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: aspeed: Use devm_platform_get_and_ioremap_resource()
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v5 3/3] i2c: gpio: support write-only sda/scl w/o pull-up
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v5 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v5 0/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v7 7/7] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 6/7] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 5/7] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 4/7] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 3/7] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 0/7] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 2/7] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v7 1/7] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: remove arch/sh
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-fwnode-api-2023017 for netdev
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v2 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: remove arch/sh
  • From: "D. Jeff Dionne" <djeffdionne@xxxxxxxxx>
• Re: remove arch/sh
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH v2 0/5] ARM: Add GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v2 2/5] dt-bindings: i2c: Add hpe,gxp-i2c
  • From: nick.hawkins@xxxxxxx
• [PATCH v2 4/5] ARM: multi_v7_defconfig: add gxp i2c module
  • From: nick.hawkins@xxxxxxx
• [PATCH v2 3/5] ARM: dts: hpe: Add I2C Topology
  • From: nick.hawkins@xxxxxxx
• [PATCH v2 1/5] i2c: hpe: Add GXP SoC I2C Controller
  • From: nick.hawkins@xxxxxxx
• [PATCH v2 5/5] MAINTAINERS: Add HPE GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v4 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: i2c-gpio: Add properties for dealing with write-only SDA/SCL w/o pullup
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: remove arch/sh
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v4 3/3] i2c: gpio: support write-only sda/scl w/o pull-up
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v4 0/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: remove arch/sh
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindindgs: i2c: qcom,i2c-geni: document operating-points-v2
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RESEND PATCH v2 1/2] dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] arm64: dts: mediatek: add i2c support for mt8365 SoC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: i2c-mt65xx: add MT8365 SoC support
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v1 3/3] misc: Add meta cld driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] misc: Add meta cld driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: soc: meta: Add meta cld driver bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for Meta
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 3/3] misc: Add meta cld driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: dev: fix notifier return values
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v1 3/3] misc: Add meta cld driver
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: soc: meta: Add meta cld driver bindings
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v1 1/3] dt-bindings: vendor-prefixes: Add an entry for Meta
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH v1 0/3] Meta control logic device support
  • From: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: mediatek: enable i2c0 for mt8365-evk board
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 4/4] i2c: i2c-mt65xx: add MT8365 SoC support
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 2/4] arm64: dts: mediatek: add i2c support for mt8365 SoC
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 0/4] Add MediaTek MT8365 I2C support
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PULL REQUEST] i2c-fwnode-api-2023017 for netdev
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: gpio: support write-only sda
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: cadence: Remove unnecessary register reads
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• Re: [PATCH 4/5] i2c: cadence: Remove always false ternary operator
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 5/5] i2c: cadence: Remove unnecessary register reads
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 3/5] i2c: cadence: Remove redundant expression in if clause
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 2/5] i2c: cadence: Remove `irq` field from driver state struct
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 1/5] i2c: cadence: Remove unused CDNS_I2C_DATA_INTR_DEPTH define
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 510/606] pinctrl: mcp23s08: Convert to i2c's .probe_new()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: gpio: support write-only sda
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: remove arch/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: remove arch/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] i2c: designware: add a new bit check for IC_CON control
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v3 3/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v3 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v3 0/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: remove arch/sh
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: Rob Landley <rob@xxxxxxxxxxx>
• Re: [PATCH 04/22] sound: remove sound/sh
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: remove arch/sh
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindindgs: i2c: qcom,i2c-geni: document operating-points-v2
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/22] watchdog: remove the shwdt driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 20/22] media: remove sh_vou
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 19/22] fbdev: remove sh7760fb
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/22] spi: remove spi-sh-sci
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 13/22] pinctrl: remove renesas sh controllers
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 10/22] input: remove sh_keysc
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: remove arch/sh
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 20/22] media: remove sh_vou
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: rk3x: fix a bunch of kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] i2c: axxia: use 'struct' for kernel-doc notation
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 17/22] spi: remove spi-jcore
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 14/22] remove drivers/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 21/22] drivers: platform: remove is_sh_early_platform_device
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 18/22] usb: remove ehci-sh
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 15/22] spi: remove spi-sh
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 20/22] media: remove sh_vou
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 16/22] spi: remove spi-sh-sci
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 19/22] fbdev: remove sh7760fb
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 08/22] dmaengine: remove the shdmac driver
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 22/22] drivers: platform: remove early_platform_cleanup
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 09/22] i2c: remove i2c-sh7760
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 12/22] net/ethernet/8390: remove stnic
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 06/22] watchdog: remove the shwdt driver
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 07/22] cpufreq: remove the sh-cpufreq driver
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 11/22] mtd/nand: remove sh_flctl
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 05/22] sound: remove sh-specific sounds/soc/sh drivers
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 10/22] input: remove sh_keysc
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 04/22] sound: remove sound/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 01/22] gpu/drm: remove the shmobile drm driver
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH 02/22] usb: remove the dead USB_OHCI_SH option
  • From: Christoph Hellwig <hch@xxxxxx>
• remove arch/sh
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [Regression] Bug 216913 - i2c not working after hibernation (i2c_designware)
  • From: "Linux kernel regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: fortify the subsystem against user-space induced deadlocks
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: fortify the subsystem against user-space induced deadlocks
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v2 05/16] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: add fwnode APIs
  • From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 510/606] pinctrl: mcp23s08: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/2] Add I2C fwnode lookup/get interfaces
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• [PATCH V10 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V10 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V10 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V10 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V10 2/4] dt-bindings: i2c: Add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH RFC v2 0/2] Add I2C fwnode lookup/get interfaces
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 041/606] drm/i2c/tda998x: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 043/606] drm/panel: raspberrypi-touchscreen: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 042/606] drm/panel: olimex-lcd-olinuxino: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 040/606] drm/i2c/tda9950: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 039/606] drm/i2c/sil164: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 038/606] drm/i2c/ch7006: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 038/606] drm/i2c/ch7006: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 038/606] drm/i2c/ch7006: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-core-base: Modify the maximum idr id for i2c adapter
  • From: Riwen Lu <luriwen@xxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: hpe: Add GXP SoC I2C Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 510/606] pinctrl: mcp23s08: Convert to i2c's .probe_new()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: (subset) [PATCH 560/606] rtc: ds1307: Convert to i2c's .probe_new()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: hpe: Add GXP SoC I2C Controller
  • From: "Hawkins, Nick" <nick.hawkins@xxxxxxx>
• RE: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: "Limonciello, Mario" <Mario.Limonciello@xxxxxxx>
• Re: [PATCH] i2c: mxs: suppress probe-deferral error message
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: qcom-geni: change i2c_master_hub to static
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-core-base: Modify the maximum idr id for i2c adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/8] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: fix i2c_dw_clk_rate() return size to be u32
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 6/6] i2c: qcom-cci: Deprecate duplicated compatibles
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/2] Add I2C fwnode lookup/get interfaces
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Convert Synquacer I2C to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 4/8] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/8] media: i2c: add DS90UB953 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/8] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 2/5] i2c: cadence: Remove `irq` field from driver state struct
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 1/5] i2c: cadence: Remove unused CDNS_I2C_DATA_INTR_DEPTH define
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 3/5] i2c: cadence: Remove redundant expression in if clause
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 5/5] i2c: cadence: Remove unnecessary register reads
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 4/5] i2c: cadence: Remove always false ternary operator
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 0/5] i2c: cadence: Small cleanups
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c: mxs: suppress probe-deferral error message
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] i2c: mxs: suppress probe-deferral error message
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH 001/606] tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 510/606] pinctrl: mcp23s08: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 560/606] rtc: ds1307: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v6 5/8] dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 4/8] dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 3/8] dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 8/8] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v6 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/6] dt-bindings: mfd: syscon: Document GXP register compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/8] dt-bindings: media: add bindings for TI DS90UB953
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 0/2] Add I2C fwnode lookup/get interfaces
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH V9 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH V9 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V9 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V9 2/4] dt-bindings: i2c: Add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V9 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V9 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• Re: [PATCH] dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH 001/606] tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• [PATCH v2 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 1/2] i2c: dev: fix notifier return values
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 0/2] i2c: fortify the subsystem against user-space induced deadlocks
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2] i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH -next] i2c: qcom-geni: change i2c_master_hub to static
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: fix missing clk_disable_unprepare()
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v5 1/2] pinctrl: Add an API to get the pinctrl pins if initialized
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v5 2/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v5 1/2] pinctrl: Add an API to get the pinctrl pins if initialized
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v5 0/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] pinctrl: Add an API to get the pinctrl pins if initialized
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH -next] i2c: qcom-geni: change i2c_master_hub to static
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH] i2c: qcom-geni: fix missing clk_disable_unprepare()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Chen, Jian Jun" <jian.jun.chen@xxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Chen, Jian Jun" <jian.jun.chen@xxxxxxxxx>
• Re: [PATCH] dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH V8 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V8 2/4] dt-bindings: i2c: add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V8 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V8 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V8 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH 595/606] w1: ds2482: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 041/606] drm/i2c/tda998x: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 040/606] drm/i2c/tda9950: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 039/606] drm/i2c/sil164: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 042/606] drm/panel: olimex-lcd-olinuxino: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 043/606] drm/panel: raspberrypi-touchscreen: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 038/606] drm/i2c/ch7006: Convert to i2c's .probe_new()
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 304/606] media: dvb-frontends/dvb-pll: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 038/606] drm/i2c/ch7006: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v4 1/2] pinctrl: Add an API to get the pinctrl pins if initialized
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v4 0/2] i2c: Set i2c pinctrl recovery info from it's device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH v5 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• [PATCH v4 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH V7 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: fix i2c_dw_clk_rate() return size to be u32
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: fix i2c_dw_clk_rate() return size to be u32
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• [PATCH v3 1/1] i2c: Set pinctrl recovery info to device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v2 08/10] i2c: i801: centralize configuring block commands in i801_block_transaction
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 10/10] i2c: i801: call i801_check_post() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 02/10] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 04/10] i2c: i801: add helper i801_set_hstadd()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 06/10] i2c: i801: handle SMBAUXCTL_E32B in i801_block_transaction_by_block only
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 05/10] i2c: i801: add i801_simple_transaction(), complementing i801_block_transaction()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 07/10] i2c: i801: centralize configuring non-block commands in i801_simple_transaction
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 03/10] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 09/10] i2c: i801: call i801_check_pre() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 01/10] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>