On 26/02/2023 04:13, Ryan Chen wrote:
> Add ast2600-i2cv2 compatible and aspeed,global-regs, aspeed,timeout
> aspeed,xfer-mode description for ast2600-i2cv2.
>
> Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/i2c/aspeed,i2c.yaml | 44 +++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> index f597f73ccd87..75de3ce41cf5 100644
> --- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> @@ -49,6 +49,25 @@ properties:
> description:
> states that there is another master active on this bus
>
> + aspeed,timeout:
> + type: boolean
> + description: I2C bus timeout enable for master/slave mode
Nothing improved here in regards to my last comment.
> +
> + aspeed,xfer-mode:
> + description: |
> + I2C bus transfer mode selection.
> + - "byte": I2C bus byte transfer mode.
> + - "buffered": I2C bus buffer register transfer mode.
> + - "dma": I2C bus dma transfer mode (default)
> + items:
> + enum: [byte, buffered, dma]
> + maxItems: 1
Drop, not an array.
> + $ref: /schemas/types.yaml#/definitions/non-unique-string-array
Wrong ref. This is not an array, but one string.
> +
> + aspeed,global-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: The phandle of i2c global register node.
> +
> required:
> - reg
> - compatible
> @@ -57,6 +76,19 @@ required:
>
> unevaluatedProperties: false
>
> +if:
This should be under allOf (in this location)
> + properties:
> + compatible:
> + contains:
> + const: aspeed,ast2600-i2cv2
> +
> +then:
> + properties:
> + reg:
> + minItems: 2
> + required:
> + - aspeed,global-regs
else:
aspeed,global-regs: false
and the same for other v2 properties
> +
> examples:
> - |
> #include <dt-bindings/clock/aspeed-clock.h>
> @@ -71,3 +103,15 @@ examples:
> interrupts = <0>;
> interrupt-parent = <&i2c_ic>;
> };
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + i2c1: i2c@80 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "aspeed,ast2600-i2cv2";
> + reg = <0x80 0x80>, <0xc00 0x20>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + aspeed,global-regs = <&i2c_global>;
> + clocks = <&syscon ASPEED_CLK_APB>;
> + resets = <&syscon ASPEED_RESET_I2C>;
> + };
Best regards,
Krzysztof
