On Wed, Jan 25, 2023 at 12:44:35PM -0600, nick.hawkins@xxxxxxx wrote: > From: Nick Hawkins <nick.hawkins@xxxxxxx> > > Document compatibility string to support I2C controller > in GXP. > > Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx> > > --- > v4: > *Provide even greater description with the use > of Phandle > *Reorder properties so they match the required > order > v3: > *Provide better description with use of Phandle > v2: > *Removed uneccessary size-cells and address-cells > *Removed phandle from hpe,sysreg-phandle > *Changed hpe,i2c-max-bus-freq to clock-frequency > --- > .../devicetree/bindings/i2c/hpe,gxp-i2c.yaml | 59 +++++++++++++++++++ > 1 file changed, 59 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml > > diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml > new file mode 100644 > index 000000000000..6604dcd47251 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: HPE GXP SoC I2C Controller > + > +maintainers: > + - Nick Hawkins <nick.hawkins@xxxxxxx> > + > +allOf: > + - $ref: /schemas/i2c/i2c-controller.yaml# > + > +properties: > + compatible: > + const: hpe,gxp-i2c > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clock-frequency: > + default: 100000 > + > + hpe,sysreg: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: > + Phandle to the global status and enable interrupt registers shared > + between each I2C engine controller instance. It enables the I2C > + engine controller to act as both a master or slave by being able to > + arm and respond to interrupts from its engine. Each bit in the > + registers represent the respective bit position. Each bit represents the bit position? AIUI, each I2C instance has a bit in it needs to control. How does the driver know what instance (and therefore the correct bit)? Typically you would have a 2nd cell here with that information. > + > +required: > + - compatible > + - reg > + - interrupts > + > +unevaluatedProperties: false > + > +examples: > + - | > + i2c@2600 { > + compatible = "hpe,gxp-i2c"; > + reg = <0x2500 0x70>; > + interrupts = <9>; > + #address-cells = <1>; > + #size-cells = <0>; > + hpe,sysreg = <&sysreg_system_controller>; > + clock-frequency = <10000>; > + > + eeprom@50 { > + compatible = "atmel,24c128"; > + reg = <0x50>; > + }; > + }; > -- > 2.17.1 >
