Linux Kernel I2C

• Thread Index

• [PATCH v2 03/10] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 09/10] i2c: i801: call i801_check_pre() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 01/10] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 00/10] i2c: i801: Series with minor improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/1] i2c: designware: fix i2c_dw_clk_rate() return size to be u32
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v3 1/1] i2c: designware: use casting of u64 in clock multiplication to avoid overflow
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] HID: mcp2221: don't connect hidraw
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• [PATCH v4] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Fix unbalanced suspended flag
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V7 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V7 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V7 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V7 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V7 2/4] dt-bindings: i2c: add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC net-next v2 2/2] net: sfp: use i2c_get_adapter_by_fwnode()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC net-next v2 1/2] i2c: add fwnode APIs
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH RFC net-next v2 2/2] net: sfp: use i2c_get_adapter_by_fwnode()
  • From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
• [PATCH RFC net-next v2 1/2] i2c: add fwnode APIs
  • From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
• [PATCH RFC v2 0/2] Add I2C fwnode lookup/get interfaces
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH RFC 1/2] i2c: add fwnode APIs
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH RFC 1/2] i2c: add fwnode APIs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PATCH v1 3/6] dt-bindings: mfd: syscon: Document GXP register compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 4/6] ARM: dts: hpe: Add I2C Topology
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/6] dt-bindings: i2c: hpe,gxp-i2c
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: hpe: Add GXP SoC I2C Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 5/8] i2c: i801: add helper i801_set_hstadd()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v1 4/6] ARM: dts: hpe: Add I2C Topology
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 1/6] i2c: hpe: Add GXP SoC I2C Controller
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 3/6] dt-bindings: mfd: syscon: Document GXP register compatible
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 6/6] MAINTAINERS: Add HPE GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 0/6] ARM: Add GXP I2C Support
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 5/6] ARM: multi_v7_defconfig: add gxp i2c module
  • From: nick.hawkins@xxxxxxx
• [PATCH v1 2/6] dt-bindings: i2c: hpe,gxp-i2c
  • From: nick.hawkins@xxxxxxx
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Francesco Dolcini <francesco@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Primoz Fiser <primoz.fiser@xxxxxxxxx>
• Re: [PATCH] i2c: imx: increase retries on arbitration loss
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 001/606] tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] i2c: i2c-core-base: Modify the maximum idr id for i2c adapter
  • From: Riwen Lu <luriwen@xxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.2-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 1/8] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PULL REQUEST] i2c-for-6.2-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Fix unbalanced suspended flag
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH v2 1/1] i2c: designware: set pinctrl recovery information from device pinctrl
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: add pinctrl for recovery info as an option
  • From: "Hawa, Hanna" <hhhawa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: designware: add pinctrl for recovery info as an option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 1/1] i2c: designware: use u64 for clock freq to avoid u32 multiplication overflow
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• [PATCH 1/1] i2c: designware: add pinctrl for recovery info as an option
  • From: Hanna Hawa <hhhawa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V6 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: Update maintainer list for virtio i2c
  • From: Conghui <conghui.chen@xxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 6/6] i2c: qcom-cci: Deprecate duplicated compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: sm8250: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 6/6] i2c: qcom-cci: Deprecate duplicated compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/6] arm64: dts: qcom: sdm845: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: sm8450: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 2/6] arm64: dts: qcom: msm8916: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH V6 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Convert Synquacer I2C to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V6 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/8] dt-bindings: media: add bindings for TI DS90UB953
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH] HID: mcp2221: fix probing of the I2C bus added by hid_mcp2221
  • From: Sven Zühlsdorf <sven.zuehlsdorf@xxxxxxxx>
• Re: NULL pointer dereferences in hid-mcp2221
  • From: Sven Zühlsdorf <sven.zuehlsdorf@xxxxxxxx>
• Re: [PATCH] HID: mcp2221: Fix GPIO output handling
  • From: Sven Zühlsdorf <sven.zuehlsdorf@xxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sm8250: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/4] arm64: dts: qcom: msm8916: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: qcom,i2c-cci: Fall back to common compatibles
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sdm845: Add fallback CCI compatible
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH V6 2/4] dt-bindings: i2c: add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V6 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V6 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V6 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V6 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH V5 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubb.aaron@xxxxxxxxx>
• Re: [PATCH V5 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/8] dt-bindings: media: add bindings for TI DS90UB953
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: kernel test robot <yujie.liu@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 132/606] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 4/8] dt-bindings: media: add bindings for TI DS90UB953
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Convert Synquacer I2C to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• [PATCH] i2c: designware: Fix unbalanced suspended flag
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] i2c: imx: add irqf_no_suspend flag
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• [PATCH 1/2] i2c: dev: fix notifier return values
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/2] i2c: dev: don't allow user-space to deadlock the kernel
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/2] i2c: fortify the subsystem against user-space induced deadlocks
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 4/8] dt-bindings: media: add bindings for TI DS90UB953
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 1/8] i2c: core: let adapters be notified of client attach/detach
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 7/8] media: i2c: add DS90UB913 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 0/8] i2c-atr and FPDLink
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 6/8] media: i2c: add DS90UB960 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 8/8] media: i2c: add DS90UB953 driver
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• [PATCH v5 5/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/2] i2c: add fwnode APIs
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 1/2] i2c: add fwnode APIs
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] dt-bindings: media: add bindings for TI DS90UB960
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH V5 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v4 2/8] i2c: add I2C Address Translator (ATR) support
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] i2c: ismt: Fix an out-of-bounds bug in ismt_access()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: Fix possible null-ptr-deref
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH RESEND] i2c: mux: reg: check return value after calling platform_get_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Make sure to disable clock on .remove()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH RFC 2/2] net: sfp: use i2c_get_adapter_by_fwnode()
  • From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
• [PATCH RFC 1/2] i2c: add fwnode APIs
  • From: "Russell King (Oracle)" <rmk+kernel@xxxxxxxxxxxxxxx>
• [PATCH RFC 0/2] Add I2C fwnode lookup/get interfaces
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V5 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH v2] i2c: mux: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V5 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V5 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: Convert to use sysfs_emit_at() API
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: mux: Convert to use sysfs_emit_at() API
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH 132/606] iio: light: max44009: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 222/606] Input: synaptics_i2c - Convert to i2c's .probe_new()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 209/606] Input: atmel_captouch - Convert to i2c's .probe_new()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH V5 4/4] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V5 2/4] dt-bindings: i2c: add Loongson LS2X I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V5 3/4] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V5 1/4] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V5 0/4] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH 047/606] i2c: mux: pca9541: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH i2c-tools] i2cdetect: display more functionality bits with '-F'
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-pxa2xx: fix missing pci_disable_device() on error in ce4100_i2c_probe
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 045/606] i2c: slave-eeprom: Convert to i2c's .probe_new()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 048/606] i2c: mux: pca954x: Convert to i2c's .probe_new()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 044/606] i2c: core: Convert to i2c's .probe_new()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 046/606] i2c: smbus: Convert to i2c's .probe_new()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 047/606] i2c: mux: pca9541: Convert to i2c's .probe_new()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] drivers/i2c: use simple i2c probe
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Daniel Beer <daniel.beer@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Daniel Beer <daniel.beer@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] hid-ft260: add UART support.
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] hid-ft260: add UART support.
  • From: Daniel Beer <daniel.beer@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.1-rc8
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-6.1-rc8
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 192/606] Input: adp5588-keys - Convert to i2c's .probe_new()
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/3] extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90F
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 192/606] Input: adp5588-keys - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH V4 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] i2c: imx: Only DMA messages with I2C_M_DMA_SAFE flag set
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: add irqf_no_suspend flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: Set ACPI node as primary fwnode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: cht-wc: Add charger-chip info for the Lenovo Yoga Tab 3 YT3-X90F
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/3] mfd/i2c/extcon: Add Lenovo Yoga Tab 3 support to cht-wc PMIC code
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: make bus recovery optional
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Fix regression with bus recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Make sure to disable clock on .remove()
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH v3] HID: use sysfs_emit() to instead of scnprintf()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH v2] HID: use sysfs_emit() to instead of scnprintf()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] HID: use sysfs_emit() to instead of scnprintf()
  • From: <ye.xingchen@xxxxxxxxxx>
• Re: [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 2/5] i2c: gpio: Add support on ACPI-based system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V4 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH V4 2/5] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V4 5/5] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V4 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V4 0/5] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V4 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V4 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH 036/606] drm/bridge: ti-sn65dsi86: Convert to i2c's .probe_new()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: Fix GPIO output handling
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v3 6/6] i2c: qcom-geni: add support for I2C Master Hub variant
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 4/6] soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 5/6] i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 3/6] soc: qcom: geni-se: add desc struct to specify clocks from device match data
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH] i2c: qcom-geni: Fix error return code in geni_i2c_gpi_xfer()
  • From: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] soc: qcom: geni-se: add desc struct to specify clocks from device match data
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH i2c-tools] i2cdetect: display more functionality bits with '-F'
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 3/6] soc: qcom: geni-se: add desc struct to specify clocks from device match data
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: add loongson i2c
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: add loongson i2c
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH 487/606] misc: eeprom/eeprom: Convert to i2c's .probe_new()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: add loongson i2c
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: make bus recovery optional
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: make bus recovery optional
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: loongson: add bus driver for the loongson i2c controller
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: i2c: add loongson i2c
  • From: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: make bus recovery optional
  • From: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Fix regression with bus recovery
  • From: Michal Simek <michal.simek@xxxxxxx>
• RE: [PATCH v2] i2c: cadence: Fix regression with bus recovery
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• [PATCH v2] i2c: cadence: Fix regression with bus recovery
  • From: carsten.haitzler@xxxxxxxxxxxx
• Re: [PATCH] i2c: cadence: Fix regression with bus recovery
  • From: Carsten Haitzler <carsten.haitzler@xxxxxxxxxxxx>
• RE: [PATCH] i2c: cadence: Fix regression with bus recovery
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH V3 2/5] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH 005/606] tpm: tis_i2c: Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH 004/606] tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH 003/606] tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH 002/606] tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH 001/606] tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  • From: Jarkko Sakkinen <jarkko@xxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/3] i2c: cht-wc: Add charger-chip info for the Lenovo Yoga Tab 3 YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 0/3] mfd/i2c/extcon: Add Lenovo Yoga Tab 3 support to cht-wc PMIC code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/3] extcon: intel-cht-wc: Add support for Lenovo Yoga Tab 3 Pro YT3-X90F
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Tab 3 X90F to intel_cht_wc_models
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• [PATCH] i2c: cadence: Fix regression with bus recovery
  • From: carsten.haitzler@xxxxxxxxxxxx
• Re: [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH V3 2/5] i2c: gpio: Add support on ACPI-based system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V3 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 007/606] crypto: atmel-sha204a - Convert to i2c's .probe_new()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 006/606] crypto: atmel-ecc - Convert to i2c's .probe_new()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH V3 4/5] i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V3 5/5] LoongArch: Enable LS2X I2C in loongson3_defconfig
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V3 2/5] i2c: gpio: Add support on ACPI-based system
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V3 0/5] i2c: ls2x: Add support for the Loongson-2K/LS7A I2C controller
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V3 1/5] i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• [PATCH V3 3/5] dt-bindings: i2c: add bindings for Loongson LS2X I2C
  • From: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
• Re: [PATCH] i2c: Use device_match_of_node()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: Use device_match_of_node()
  • From: <ye.xingchen@xxxxxxxxxx>
• [PATCH] i2c: core: Fix possible memleak in i2c_new_client_device()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 011/606] gpio: max732x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Barnabás Pőcze <pobrn@xxxxxxxxxxxxxx>
• [PATCH v3] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• Re: [PATCH v2] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT
  • From: Mateusz Jończyk <mat.jonczyk@xxxxx>
• Re: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 011/606] gpio: max732x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Jason Gunthorpe <jgg@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 012/606] gpio: pca953x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 013/606] gpio: pcf857x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 011/606] gpio: max732x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Matthew Wilcox <willy@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 3/5] driver core: make struct device_type.uevent() take a const *
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 011/606] gpio: max732x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 013/606] gpio: pcf857x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 012/606] gpio: pca953x: Convert to i2c's .probe_new()
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: core: Fix possible memleak in i2c_register_adapter()
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH 509/606] of: unittest: Convert to i2c's .probe_new()
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 567/606] staging: iio: ad5933: Convert to i2c's .probe_new()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 109/606] iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 171/606] iio: pressure: icp10100: Convert to i2c's .probe_new()
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 315/606] media: dvb-frontends/si2165: Convert to i2c's .probe_new()
  • From: Matthias Schwarzott <zzam@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 362/606] media: i2c/rj54n1cb0c: Convert to i2c's .probe_new()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 353/606] media: i2c/mt9t112: Convert to i2c's .probe_new()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 605/606] ipmi: ssif_bmc: Convert to i2c's .probe_new()
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH 067/606] iio: adc: max9611: Convert to i2c's .probe_new()
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
  • From: Tommaso Merciai <tommaso.merciai@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 593/606] backlight: tosa: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 592/606] backlight: lv5207lp: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 591/606] backlight: lp855x: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 590/606] backlight: lm3639: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 589/606] backlight: lm3630a: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 588/606] backlight: bd6107: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 587/606] backlight: arcxcnn: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 166/606] iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 586/606] backlight: adp8870: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 585/606] backlight: adp8860: Convert to i2c's .probe_new()
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH] i2c: qcom-geni: fix error return code in geni_i2c_gpi_xfer
  • From: Wang Yufen <wangyufen@xxxxxxxxxx>
• Re: [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 481/606] mfd: wm8994-core: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 480/606] mfd: wm8400-core: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 479/606] mfd: wm8350-i2c: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 192/606] Input: adp5588-keys - Convert to i2c's .probe_new()
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: [PATCH 417/606] mfd: adp5520: Convert to i2c's .probe_new()
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: [PATCH 513/606] power: supply: adp5061: Convert to i2c's .probe_new()
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: [PATCH 539/606] regulator: ad5398: Convert to i2c's .probe_new()
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: [PATCH 585/606] backlight: adp8860: Convert to i2c's .probe_new()
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• Re: [PATCH 406/606] media: tuners/qm1d1c0042: Convert to i2c's .probe_new()
  • From: Akihiro TSUKADA <tskd08@xxxxxxxxx>
• Re: [PATCH 405/606] media: tuners/qm1d1b0004: Convert to i2c's .probe_new()
  • From: Akihiro TSUKADA <tskd08@xxxxxxxxx>
• Re: [PATCH 404/606] media: tuners/mxl301rf: Convert to i2c's .probe_new()
  • From: Akihiro TSUKADA <tskd08@xxxxxxxxx>
• Re: [PATCH 320/606] media: dvb-frontends/tc90522: Convert to i2c's .probe_new()
  • From: Akihiro TSUKADA <tskd08@xxxxxxxxx>
• Re: [PATCH 478/606] mfd: wm831x-i2c: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 437/606] mfd: madera-i2c: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 418/606] mfd: arizona-i2c: Convert to i2c's .probe_new()
  • From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 584/606] usb: typec: ucsi: stm32g0: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 583/606] usb: typec: ucsi/ucsi_ccg: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 582/606] usb: typec: tcpm/tcpci_rt1711h: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 581/606] usb: typec: tcpm/tcpci_maxim: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 580/606] usb: typec: tcpm/tcpci: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 579/606] usb: typec: tcpm/fusb302: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 578/606] usb: typec: hd3ss3220: Convert to i2c's .probe_new()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 424/606] mfd: bd9571mwv: Convert to i2c's .probe_new()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 237/606] Input: edt-ft5x06 - Convert to i2c's .probe_new()
  • From: Oliver Graute <oliver.graute@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH 509/606] of: unittest: Convert to i2c's .probe_new()
  • From: Frank Rowand <frowand.list@xxxxxxxxx>
• Re: [PATCH 500/606] net/mlx5: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 561/606] rtc: isl1208: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 572/606] usb: usb251xb: Convert to i2c's .probe_new()
  • From: Richard Leitner <richard.leitner@xxxxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 247/606] Input: iqs5xx - Convert to i2c's .probe_new()
  • From: Jeff LaBundy <jeff@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: i2c: add loongson i2c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 288/606] leds: turris-omnia: Convert to i2c's .probe_new()
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: [PATCH 500/606] net/mlx5: Convert to i2c's .probe_new()
  • From: Ido Schimmel <idosch@xxxxxxxxxx>
• Re: [PATCH 561/606] rtc: isl1208: Convert to i2c's .probe_new()
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH i2c-tools] i2cdetect: display more functionality bits with '-F'
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 351/606] media: i2c/mt9p031: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 348/606] media: i2c/ml86v7667: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 358/606] media: i2c/ov6650: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 355/606] media: i2c/mt9v032: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 352/606] media: i2c/mt9t001: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 350/606] media: i2c/mt9m032: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 092/606] iio: dac: ti-dac5571: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 014/606] drm/bridge: adv7511: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 017/606] drm/bridge: anx7625: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 015/606] drm/bridge/analogix/anx6345: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 016/606] drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 035/606] drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 024/606] drm/bridge: lt9611: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 022/606] drm/bridge: lt8912b: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 037/606] drm/bridge: tfp410: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 034/606] drm/bridge/tc358775: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 025/606] drm/bridge: lt9611uxc: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 033/606] drm/bridge: tc358768: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 032/606] drm/bridge: tc358767: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 028/606] drm/bridge: parade-ps8622: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 030/606] drm/bridge: sii9234: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 027/606] drm/bridge: nxp-ptn3460: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 036/606] drm/bridge: ti-sn65dsi86: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 021/606] drm/bridge: it66121: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 018/606] drm/bridge: icn6211: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 026/606] drm/bridge: megachips: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 031/606] drm/bridge: sii8620: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 029/606] drm/bridge: sii902x: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 023/606] drm/bridge: lt9211: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 047/606] i2c: mux: pca9541: Convert to i2c's .probe_new()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 048/606] i2c: mux: pca954x: Convert to i2c's .probe_new()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 020/606] drm/bridge: it6505: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 019/606] drm/bridge: chrontel-ch7033: Convert to i2c's .probe_new()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 257/606] Input: silead - Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 529/606] power: supply: max17042_battery: Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 241/606] Input: goodix - Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 231/606] Input: chipone_icn8318 - Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 221/606] Input: elan_i2c_core - Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 056/606] iio: accel: mma8452: Convert to i2c's .probe_new()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 054/606] iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 454/606] mfd: rohm-bd718x7: Convert to i2c's .probe_new()
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 599/606] ALSA: hda: cs35l41: Convert to i2c's .probe_new()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 600/606] ALSA: ppc: keywest: Convert to i2c's .probe_new()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 598/606] ALSA: aoa: tas: Convert to i2c's .probe_new()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 597/606] ALSA: aoa: onyx: Convert to i2c's .probe_new()
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 228/606] Input: auo-pixcir-ts - Convert to i2c's .probe_new()
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH 358/606] media: i2c/ov6650: Convert to i2c's .probe_new()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH 594/606] video: fbdev: matrox: Convert to i2c's .probe_new()
  • From: Helge Deller <deller@xxxxxx>
• Re: [PATCH 390/606] media: i2c/video-i2c: Convert to i2c's .probe_new()
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• Re: [PATCH 117/606] iio: light: apds9960: Convert to i2c's .probe_new()
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH 000/606] i2c: Complete conversion to i2c_probe_new
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 604/606] ASoC: codecs: tas2780: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 468/606] mfd: tps6507x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 461/606] mfd: stmpe-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 349/606] media: i2c/msp3400-driver: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 487/606] misc: eeprom/eeprom: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 187/606] iio: temperature: tmp006: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 535/606] power: supply: ucs1002: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 250/606] Input: melfas_mip4 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 329/606] media: i2c/adv7183: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 035/606] drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 474/606] mfd: tps65912-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 255/606] Input: rohm_bu21023 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 182/606] iio: proximity: rfd77402: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 571/606] serial: sc16is7xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 515/606] power: supply: bq24190: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 267/606] Input: zforce_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 233/606] Input: cy8ctmg110_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 276/606] leds: lm3697: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 500/606] net/mlx5: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 439/606] mfd: max77620: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 074/606] iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 475/606] mfd: twl-core: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 539/606] regulator: ad5398: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 416/606] mfd: act8945a: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 324/606] media: i2c/ad9389b: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 363/606] media: i2c/s5k4ecgx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 460/606] mfd: stmfx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 229/606] Input: bu21013_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 280/606] leds: lp5523: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 268/606] leds: bd2802: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 350/606] media: i2c/mt9m032: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 347/606] media: m5mols: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 443/606] mfd: max8925-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 544/606] regulator: lp872x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 384/606] media: i2c/tw9903: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 254/606] Input: raydium_i2c_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 602/606] ASoC: max98396: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 564/606] spi: sc18is602: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 464/606] mfd: tc3589x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 270/606] leds: is31fl32xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 343/606] media: i2c/ks0127: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 428/606] mfd: da9062-core: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 572/606] usb: usb251xb: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 431/606] mfd: khadas-mcu: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 153/606] iio: magnetometer: ak8974: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 575/606] usb: isp1301-omap: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 351/606] media: i2c/mt9p031: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 429/606] mfd: da9063-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 368/606] media: i2c/saa7115: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 284/606] leds: pca9532: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 341/606] media: cx25840: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 068/606] iio: adc: mcp3422: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 499/606] net: dsa: xrs700x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 223/606] Input: rmi_i2c - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 432/606] mfd: lm3533-core: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 403/606] media: tuners/mt2060: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 310/606] media: dvb-frontends/mn88472: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 314/606] media: dvb-frontends/rtl2832: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 138/606] iio: light: si1145: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 582/606] usb: typec: tcpm/tcpci_rt1711h: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 336/606] media: i2c/bt856: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 455/606] mfd: rsmu_i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 518/606] power: supply: bq2515x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 547/606] regulator: max1586: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 517/606] power: supply: bq24735: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 530/606] power: supply: rt5033_battery: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 356/606] media: i2c/noon010pc30: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 493/606] misc: isl29020: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 245/606] Input: ili210x - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 563/606] rtc: rs5c372: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 407/606] media: tuners/si2157: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 241/606] Input: goodix - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 321/606] media: dvb-frontends/tda10071: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 546/606] regulator: ltc3589: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 570/606] staging: olpc_dcon: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 591/606] backlight: lp855x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 387/606] media: i2c/uda1342: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 243/606] Input: hx83112b: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 441/606] mfd: max77843: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 194/606] Input: cap11xx - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 386/606] media: i2c/tw9910: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 417/606] mfd: adp5520: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 293/606] macintosh: windfarm_fcu_controls: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 060/606] iio: adc: ad7291: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 510/606] pinctrl: mcp23s08: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 269/606] leds: blinkm: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 204/606] Input: tca8418_keypad - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 177/606] iio: pressure: t5403: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 376/606] media: i2c/tda9840: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 427/606] mfd: da9055-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 516/606] power: supply: bq24257: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 272/606] leds: lm3532: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 299/606] media: dvb-frontends/af9013: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 605/606] ipmi: ssif_bmc: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 525/606] power: supply: ltc2941: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 489/606] misc: eeprom/max6875: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 205/606] Input: tm2-touchkey - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 434/606] mfd: lp873x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 225/606] Input: ad7879-i2c - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 196/606] Input: lm8323 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 237/606] Input: edt-ft5x06 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 385/606] media: i2c/tw9906: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 421/606] mfd: atc260x-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 315/606] media: dvb-frontends/si2165: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 227/606] Input: atmel_mxt_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 211/606] Input: cma3000_d0x_i2c - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 562/606] rtc: m41t80: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 469/606] mfd: tps65086: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 141/606] iio: light: tcs3414: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 286/606] leds: tca6507: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 232/606] Input: cy8ctma140 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 366/606] media: i2c/saa6752hs: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 512/606] platform/chrome: cros_ec: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 537/606] pwm: pca9685: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 580/606] usb: typec: tcpm/tcpci: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 496/606] mtd: maps: pismo: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 142/606] iio: light: tcs3472: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 282/606] leds: lp8501: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 549/606] regulator: max8660: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 484/606] misc: apds990x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 344/606] media: i2c/lm3560: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 423/606] mfd: bcm590xx: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 259/606] Input: st1232 - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 503/606] NFC: nxp-nci: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 492/606] misc: isl29003: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 502/606] nfc: mrvl: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 504/606] nfc: pn533: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 590/606] backlight: lm3639: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 600/606] ALSA: ppc: keywest: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 285/606] leds: pca963x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 505/606] nfc: pn544: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 467/606] mfd: tps65010: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 466/606] mfd: tps6105x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 318/606] media: dvb-frontends/stv090x: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 603/606] ASoC: codecs: src4xxx-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 333/606] media: i2c/adv7842: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 311/606] media: dvb-frontends/mn88473: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 534/606] power: supply: smb347: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 479/606] mfd: wm8350-i2c: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 594/606] video: fbdev: matrox: Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• [PATCH 253/606] Input: pixcir_i2c_ts - Convert to i2c's .probe_new()
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>