Hi all:
This patch series adds support for the I2C module found on various
Loongson systems with the Loongson-2K SoC or the Loongson LS7A bridge chip.
For now, the I2C driver is suitable for DT-based or ACPI-based systems.
I have tested on Loongson-3A5000LA+LS7A1000/LS7A2000, Loongson-2K1000LA
and Loongson-2K0500.
Thanks.
Changes since V5:
- patch (1/4)
- Add property.h.
- patch (3/4)
- Put the ls2x_i2c_reginit() in front of devm_request_irq();
- Refact ls2x_i2c_adjust_bus_speed: discard the magic value of
the divider register and LS2X_I2C_FREQ_STD is used to calculate
the frequency;
- Drop useless parameters: priv->suspended, and also disable I2C
interrupts during suspend;
- Drop ls2x_i2c_remove(), for the adapter will be auto deleted on
driver detach;
- Drop MODULE_ALIAS;
- Code formatting, such as alignment.
Thanks Andy for your comments.
Changes since V4:
- patch (1/4)
- Drop unneeded headers: of.h;
- xxx_props -> xxx_properties.
- patch (2/4)
- Add interrupt headers to fix syntax error found by Rob.
- patch (3/4)
- Drop atmoic loop in ls2x_i2c_master_xfer(), I have tested it on the
appropriate environment with no problems;
- Define the corresponding bits in I2C_LS2X_CTR to avoid magic
numbers;
- dev_get_drvdata() is used to get ls2x_i2c_priv() in
ls2x_i2c_suspend();
- i2c_add_adapter() -> devm_i2c_add_adapter();
- SET_SYSTEM_SLEEP_PM_OPS() -> DEFINE_RUNTIME_DEV_PM_OPS();
- Code formatting, such as alignment.
Details: https://lore.kernel.org/all/Y4e%2F6KewuHjAluSZ@xxxxxxxxxxxxxxxxxx/
Changes since V3:
- Addressed all review comments from v3
- Change the changelog text to make it clearer (1/5);
- Fix some minor bugs, such as formatting issues (2/5);
- Fix some formatting issues (3/5);
- Deep refactoring of code for clarity (4/5).
Details: https://lore.kernel.org/all/Y4S2cnlAm3YYvZ8E@xxxxxxxxxxxxxxxxxx/
Thanks to all for their suggestions.
Changes since V2:
- Addressed all review comments from v2
- Drop of_match_ptr() in i2c-gpio to avoid potential unused warnings
(1/5);
- Introduce i2c_gpio_get_props() function as the generic interface
to get i2c-gpio props from DT or ACPI table (2/5);
- Refact ls2x i2c code, similar to removing excessive goto tags (4/5).
Thanks to Andy and Mika for their suggestions.
Changes since V1:
- Remove the function of getting the static i2c bus number from ACPI "_UID";
- Fix build warning from kernel test robot.
Binbin Zhou (4):
i2c: gpio: Add support on ACPI-based system
dt-bindings: i2c: add Loongson LS2X I2C controller
i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller
LoongArch: Enable LS2X I2C in loongson3_defconfig
.../bindings/i2c/loongson,ls2x-i2c.yaml | 51 +++
arch/loongarch/configs/loongson3_defconfig | 1 +
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-gpio.c | 28 +-
drivers/i2c/busses/i2c-ls2x.c | 376 ++++++++++++++++++
6 files changed, 458 insertions(+), 10 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
create mode 100644 drivers/i2c/busses/i2c-ls2x.c
--
2.31.1
